- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
MILL/DRILL: WBM-16A V/SPEED BRUSHLESS MOTOR WEISS
SKU:
MD-330396
* Compact milling & drilling machine with variable speed control.
* Brushless motor provides more power & less maintenance.
* Motor control board manufactured in the U.S.A.
* Digital displays for both speed & depth.
* Geared head for greater torque & quiet running.
* Head is raised & lowered on the dovetail column using a handwheel.
* Spindle is supported by high speed taper roller bearings.
* Fine down feed adjustment.
* Heads can be tilted ±90°.
* These models are ideal for hobbyists and small workshops.
MILL/DRILL: WMD-20L V/SPEED WEISS
SKU:
MD-330400
* Compact milling & drilling machine with variable speed control.
* Brushless motor provides more power & less maintenance.
* Motor control board manufactured in the U.S.A.
* Digital displays for both speed & depth.
* Geared head for greater torque & quiet running.
* Head is raised & lowered on the dovetail column using a handwheel.
* Spindle is supported by high speed taper roller bearings.
* Fine down feed adjustment.
* Heads can be tilted ±90°.
* These models are ideal for hobbyists and small workshops.
MILL/DRILL: WBM-20L V/SPEED BRUSHLESS MOTOR WEISS
SKU:
MD-330402
* The WMD20L is a compact milling & drilling machine with a variable speed control offering speeds from 0 to 2250rpm with a turn of a dial.
* This machine features the new brushless motor which offers more torque than the old model.
* Spindle is supported by high speed taper roller bearings.
* The geared head provides greater torque and quite running.
* Head is raised by handwheel on column with dovetail ways.
* Head can be tilted to 90°.
* This is an ideal machine for modelmakers or any small workshop.
MILL/DRILL: WM-25VL V/SPEED BRUSHLESS MTR P/FEED WEISS
SKU:
MD-330410
* The WMD25L is a compact milling & drilling machine with a variable speed control offering speeds from 0 to 2250rpm with a turn of a dial.
* This machine features a brushless motor which offers consistant torque at all speeds.
* Spindle is supported by high speed taper roller bearings.
* Head is raised by handwheel on column with dovetail ways.
* Head can be tilted to 90°.
* This is an ideal machine for modelmakers or any small workshop
* Fitted with table power feed
MILL DRILL: WMD-30L 1.5kW WEISS
SKU:
MD-330418
* The WMD30L is a compact milling & drilling machine with a variable speed control offering speeds from 0 to 2250rpm with a turn of a dial.
* Spindle is supported by high speed taper roller bearings.
* The geared head provides greater torque and quite running.
* Head is raised by handwheel on column with dovetail ways.
* Head can be tilted to 90°.
* This is an ideal machine for modelmakers or any small workshop.
MILL DRILL: WBM-30L 1.5kW BRUSHLESS MOTOR WEISS
SKU:
MD-330419
* The WBM-30L is a compact milling & drilling machine with a variable speed control offering speeds from 0 to 2250rpm with a turn of a dial.
* This machine features a brushless motor which offers consistant torque at all speeds.
* Spindle is supported by high speed taper roller bearings.
* The geared head provides greater torque and quite running.
* Head is raised by handwheel on column with dovetail ways.
* Head can be tilted to 90°.
* This is an ideal machine for modelmakers or any small workshop.
MILL DRILL: WMD-30LV 1.1KW WITH POWERFEED WEISS
SKU:
MD-330420
* The WMD30LV is a compact milling & drilling machine with a variable speed control offering speeds from 0 to 2250rpm with a turn of a dial.
* Powerfeed fitted on the X axis.
* This machine features a brushless motor which offers consistant torque at all speeds.
* Spindle is supported by high speed taper roller bearings.
* The geared head provides greater torque and quite running.
* Head is raised by handwheel on column with dovetail ways.
* Head can be tilted to 90°.
* This is an ideal machine for modelmakers or any small workshop.
MILL DRILL: WMD-30V 1.5HP 1PH WEISS
SKU:
MD-330422
* The WMD30V is a compact milling & drilling machine with a variable speed control offering speeds from 0 to 2250rpm with a turn of a dial.
* This machine features a brushless motor which offers consistant torque at all speeds.
* Spindle is supported by high speed taper roller bearings.
* The geared head provides greater torque and quite running.
* Head is raised by handwheel on column with dovetail ways.
* Head can be tilted to 90°.
* This is an ideal machine for modelmakers or any small workshop.
MILL DRILL: WMD-32B 1.5HP 1PH WEISS
SKU:
MD-330424
* The WMD-32B is a compact milling & drilling machine with a variable speed control offering speeds from 0 to 2250rpm with a turn of a dial.
* This machine features a brushless motor which offers consistant torque at all speeds.
* Spindle is supported by high speed taper roller bearings.
* The geared head provides greater torque and quite running.
* Head is raised by handwheel on column with dovetail ways.
* Head can be tilted to 90°.
* This is an ideal machine for modelmakers or any small workshop.
MILL DRILL: WMD-32L 1.5kW 1PH V/SPD BRUSHLESS WEISS
SKU:
MD-330426
* The WMD32L is a compact milling & drilling machine with a variable speed control offering speeds from 50 to 2250rpm with a turn of a dial.
* This machine features a brushless motor which offers consistant torque at all speeds.
* Spindle is supported by high speed taper roller bearings.
* The geared head provides greater torque and quite running.
* Head is raised by handwheel on column with dovetail ways.
* Head can be tilted to 90°.
* This is an ideal machine for modelmakers or any small workshop
* Brushless verable speed motor
MILL DRILL: ZX-32G/A 1HP 1PH
SKU:
MD-330428
* The ZX32G is a compact milling & drilling machine with a variable speed control offering speeds from 0 to 2250rpm with a turn of a dial.
* This machine features a brushless motor which offers consistant torque at all speeds.
* Spindle is supported by high speed taper roller bearings.
* The geared head provides greater torque and quite running.
* Head is raised by handwheel on column with dovetail ways.
* Head can be tilted to 90°.
* This is an ideal machine for modelmakers or any small workshop.
FOOT SWITCH: SUIT VM25L & VM32L
SKU:
MD-330530
STAND: MILL/DRILL WMD20V DELUXE
SKU:
MD-330600
STAND: MILL/DRILL WBM20V DELUXE
SKU:
MD-330604
STAND: MILL/DRILL TPC-25 DELUXE
SKU:
MD-330608
STAND: MILL/DRILL WBM30L DELUXE
SKU:
MD-330612
STAND: MILL/DRILL WM32L DELUXE
SKU:
MD-330616
STAND: MILL/DRILL GL-45 STANDARD
SKU:
MD-330626
STAND: MILL/DRILL TPC40/45/7045 DELUXE
SKU:
MD-330630
MILLING MACHINE: TM240 TURRET R8 1PH
SKU:
MM-228000
* The TM-240A (X6325A) is a turret style milling machine.
* Fully tiliting, swivelling & rotating head.
* The saddle guideways are lined with turcite wearable material.
* Hardened & precision ground work table and guideways.
* High quality meehanite cast body.
* Chromed and ground spindle.
* Double 55° dovetail guide way is adopted on both Y and Z axis.
* One shot lubrication.
MILLING MACHINE: GLOBAL WM20 1PH
SKU:
MM-228100
MILLING MACHINE: X6325A /TM240 TURRET NT30 1PH (B/SCREWS)
SKU:
MM-228509
* The TM-240 (X6323B) is a turret style milling machine.
* Head is fully tiliting, swivelling & rotating
* The saddle guideways are lined with turcite wearable material.
* Hardened & precision ground work table and guideways.
* High quality meehanite cast body.
* Chromed and ground spindle
* Variable speed from 65-4500rpm
* Double 55° dovetail guide way is adopted on both Y and Z axis.
* One shot lubrication
* Fitted with precision ball screws for utmost accuracy
* Comes with power rise and fall on X axis
* X & Y axis are fitted with aglin power feeds (Taiwan)
Digital 3 axis readout is Sino brand
MILLING MACHINE: X6325D /TM240 NT40 1 PH (BALL SCREWS)
SKU:
MM-228510
* The TM-240 (X6323B) is a turret style milling machine.
* Fully tiliting, swivelling & rotating head.
* The saddle guideways are lined with turcite wearable material.
* Hardened & precision ground work table and guideways.
* High quality meehanite cast body.
* Chromed and ground spindle.
* Double 55° dovetail guide way is adopted on both Y and Z axis.
* One shot lubrication.
MILLING MACHINE: TM240A (X6325A) NT30 (BALL SCREWS)
SKU:
MM-228512
* The TM-240A (X6325A) is a turret style milling machine.
* Fully tiliting, swivelling & rotating head.
* The saddle guideways are lined with turcite wearable material.
* Hardened & precision ground work table and guideways.
* High quality meehanite cast body.
* Chromed and ground spindle.
* Double 55° dovetail guide way is adopted on both Y and Z axis.
* One shot lubrication.
MILLING MACHINE: M6325A/ TM240 TURRET R8 TAPER
SKU:
MM-228514
* The TM-240A (X6325A) is a turret style milling machine.
* Fully tiliting, swivelling & rotating head.
* The saddle guideways are lined with turcite wearable material.
* Hardened & precision ground work table and guideways.
* High quality meehanite cast body.
* Chromed and ground spindle.
* Double 55° dovetail guide way is adopted on both Y and Z axis.
* One shot lubrication.
MILLING MACHINE: X6325D 5HP 3PH TURRET NT40 TAPER
SKU:
MM-228610
* The TM-240A (X6325A) is a turret style milling machine.
* Fully tiliting, swivelling & rotating head.
* The saddle guideways are lined with turcite wearable material.
* Hardened & precision ground work table and guideways.
* High quality meehanite cast body.
* Chromed and ground spindle.
* Double 55° dovetail guide way is adopted on both Y and Z axis.
* One shot lubrication.
MILLING MACHINE: TM270 (M6325D) TURRET 3PH NT40
SKU:
MM-228615
* The TM-270 (X6325D) is a turret style milling machine.
* Head is fully tiliting, swivelling & rotating
* The saddle guideways are lined with turcite wearable material.
* Hardened & precision ground work table and guideways.
* High quality meehanite cast body.
* Chromed and ground spindle
* Variable speed from 65-4500rpm
* Double 55° dovetail guide way is adopted on both Y and Z axis.
* One shot lubrication
* Comes with power rise and fall on X axis
* X & Y axis are fitted with aglin power feeds (Taiwan)
Digital 3 axis readout is Sino brand
MILLING MACHINE: TM270 TURRET NT40 (BALL SCREWS)
SKU:
MM-228616
* The TM-270 (X6325A) is a turret style milling machine.
* Head is fully tiliting, swivelling & rotating
* The saddle guideways are lined with turcite wearable material.
* Hardened & precision ground work table and guideways.
* High quality meehanite cast body.
* Chromed and ground spindle
* Variable speed from 65-4500rpm
* Double 55° dovetail guide way is adopted on both Y and Z axis.
* One shot lubrication
* Fitted with precision ball screws for utmost accuracy
* Comes with power rise and fall on X axis
* X & Y axis are fitted with aglin power feeds (Taiwan)
Digital 3 axis readout is Sino brand
MILLING MACHINE: TM330 TURRET (M6333) NT40
SKU:
MM-228620
* The TM-330 (M6333) is a turret style milling machine.
* Fully tiliting, swivelling & rotating head.
* The saddle guideways are lined with turcite wearable material.
* Hardened & precision ground work table and guideways.
* High quality meehanite cast body.
* Chromed and ground spindle.
* 3 axis digital readout & X/Y axes powerfeed.
* Powered rise & fall of the milling table.
* Automted lubrication system.
* NT40 spindle taper for heavy milling operations.
* Power drawbar fitted.
MILLING MACHINE: TM330 (X6333) TURRET NT40 BALL (SCREWS)
SKU:
MM-228625
* The TM330 (X6333) is a turret style milling machine.
* Fully tiliting, swivelling & rotating head.
* The saddle guideways are lined with turcite wearable material.
* Hardened & precision ground work table and guideways.
* High quality meehanite cast body.
* Chromed and ground spindle.
* Double 55° dovetail guide way is adopted on both Y and Z axis.
* One shot lubrication.
MILLING MACHINE: FUV-320S UNIVERSAL TAIWAN
SKU:
MM-228800
* Milling machine designed for heavy cutting.
* High quality meehanit casting.
* Fully universal head and also equipped with horizontal spindle.
* Rapid traverse on X Y Z axes.
* Variable speeds on X Y & Z axes.
* All gears and shafts are hardened.
* Table surface hardened and ground.
* Wide square ways on X Y and Z axes makes the machine rigid and stable.
* Pendent electrical control away from coolant and swarf.
MILLING MACHINE: BED TYPE 1524 X 305MM TABLE NT40
SKU:
MM-244000
MILLING MACHINE: 4H 1270 X 254MM TABLE TURRET TAIWAN
SKU:
MM-244128
MILLING MACHINE: 5H 1270 X 254MM TABLE TURRET TAIWAN
SKU:
MM-244132
* The 5H model comes with standard 1270mm table, with an option of 1372mm.
* Table is hardened and ground for durability and long service life.
* Powerful 5hp motor.
* Large diameter quill (105mm) for rigid milling performance.
* Y-Z axie rubber way cover.
* Auto lubrication system.
* Electrical cabinet.
* Made in Taiwan.
MILLING MACHINE: 6H 1372 X 254MM TABLE TURRET TAIWAN
SKU:
MM-244136
* The 6H model comes with standard 1372mm table length.
* Table is hardened and ground for durability and long service life.
* Powerful 5hp motor.
* Large diameter quill (105mm) for rigid milling performance.
* Y-Z axis rubber way cover.
* Auto lubrication system.
* Electrical cabinet.
* Made in Taiwan.
MILLING MACHINE: 7H 1350 X 305MM TABLE VERT/HORZ
SKU:
MM-244140
* This 7H horizontal & verticle model comes with standard 1350 x 305mm table.
* Hardened and ground for durability and long service life.
* Powered by 5hp 3 phase motor for constant performance.
* Large diameter quill (110mm) for rigid milling.
* Head can swivel 45 deg both left & right.
* Power feed to table with rapids
* Powered verticle rise and fall.
* Y-Z axis rubber way cover.
* Auto lubrication system.
* Electrical cabinet.
* Made in Taiwan.
MILLING MACHINE: 4VS 1370 X 254MM TABLE TURRET TAIWAN
SKU:
MM-244242
* The 4VS model turret milling machine comes with two table options - 1270 & 1370mm.
* Table and guideways are hardened and precision ground.
* Y-Z axis have rubber way cover for protection.
* Auto lubrication system.
* Electrical cabinet.
* One shot lubrication system.
* Ways are X & Y are Tercite B coated.
* Fitted with power feed on X travel.
* Made in Taiwan.
MILLING MACHINE: V2 1224 X 228MM TABLE NT40 1PH TURRET
SKU:
MM-244300
* This 2V model is the smallest of the Turret milling machines made in China
* Fitted with Tawann milling head which icorperates P5 spindle bearings
Comes with E-GEO lead screws for utmost accuracy
* Fitted with 2 axis DRO
* Comes as a manual machine but you can add power feeds etc onto it
* Y-Z axes rubber way covers.
* Auto lubrication system.
* Electrical cabinet
* Shindle taper is NT40
Overhead pentant control panel for convenient
MILLING MACHINE: V4 1370 X 254MM TABLE NT40 1PH TURRET
SKU:
MM-244308
* This 4V model is the smallest of the Turret milling machines made in China
* Fitted with Tawann milling head which icorperates P5 spindle bearings
Comes with E-GEO lead screws for utmost accuracy
* Spindle bore is NT40
* Fitted with 2 axis DRO
*power feed on X axis
* Y-Z axes rubber way covers.
* Auto lubrication system
* Slideways with Tercite-B coating
* Coolant system
* Electrical cabinet
Overhead pendant control panel for conveinence
* This model is machined with square ways
MILLING MACHINE: PBM-GVS300A PHOEBUS TAIWAN
SKU:
MM-280050
* This is a very heavy universal type milling machine with large 1470 x 300mm table.
* Both horizontal and vertical spindle tapers are NT40.
* Vertical head is variable speed while the horizontal spindle has 9 steps.
* Power feed on X, Y and Z direction with rapids.
* Comes with pendant control.
* Equipped with electric box.
* Made in Taiwan.
MILLING MACHINE: 2500UM UNIVERSAL TAIWAN
SKU:
MM-280700
* This is a heavy duty and rigid mill made from high quality meehanite casting.
* Power overarm and universal head.
* Rapid traverse on X Y & Z axis with variable speeds.
* All gears and shafts are hardened.
* Table swivels 45deg both left and right.
* All square slideways and table are hardened and ground for durability and long service.
* Available in either NT40 or NT50.
Options:
Extended table 1850 x 350mm, DRO Fitted, Chip tray, Auto lube, LED Lanp
* CE Certification, Enclosed splash shield, Spindle motor inverter
* 10hp Motor, with or without brake
MILLING MACHINE: FU-320A UNIVERSAL
SKU:
MM-280705
MILLING MACHINE: X6332B HOR/VERT DRO
SKU:
MM-280750
MILLING MACHINE: HVM50 NT40 1PH HORZ/VERTICLE
SKU:
MM-280822
* Ideal small workshop machine for both horizontal and vertical milling.
* Coarse and fine spindle feeds.
* Belt driven on both vertical and horizontal spindles.
* Single phase version all belt driven.
* Dovetail guide ways on all axis for rigidity.
* Swivel table for universal applications.
* Forward/reverse-on/off switch front panel.
* Comprehensive accessory kit makes this mill very cost effective.
MILLING MACHINE: MDH50B NT40 1PH VM
SKU:
MM-280823
* Small & economical knee type milling machine.
* Precision milling table with machined T-slots.
* Heavy castings & large slide surfaces for performance & stability.
* In built recyclable coolant system.
* One shot oil lubrication.
* 3 axis digital readout & X axis powerfeed.
* Ideal machine for small workshops.
MILLING MACHINE: ZX7550CW 3PH HORZ/VERTICLE
SKU:
MM-280825
* Ideal small workshop machine for both horizontal and vertical milling.
* Vertical head tilts left and right 90°
* Geared head on vertical spindle makes speed changes quick and easy.
* Belt driven on horizontal spindle.
* Dovetail guide ways on all axis for rigidity.
* Swivel table for universal applications.
* Forward/reverse-on/off switch on front panel.
* Comprehensive accessory kit makes this mill very cost effective.
MILLING MACHINE: ZX7550V 3PH V/SPEED HORZ/VERTICLE
SKU:
MM-280826
* The ZX7550V is a turret style horizontal & verticle milling machine.
* Head is fully tiliting, swivelling & rotating
* Hardened & precision ground work table and guideways.
* High quality meehanite cast body.
* Chromed and ground spindle
* Variable speed from 100-2000rpm
* One shot lubrication
Digital 3 axis readout is Sino brand
* Lonitudianal power feed
MILLING MACHINE: MDH50 NT40/30 3PH
SKU:
MM-280828
MILLING MACHINE: ZX6350G HOR/VERTICLE G/HEAD
SKU:
MM-280845
* This geared head horizontal and vertical milling machine is a vey versitile machine.
* Suitable for most workshops.
* Geared head for quick speed changes.
* Comes with Sino 3 axis DRO for ease of use and accuracy.
* Power feed on X & Y travel
* Power rise & fall
* Worklamp and coolant are standard features.
BORING MACHINE: TX6113C
SKU:
MMB100650
BORING/MILLING: CNC TK65
SKU:
MMB100800
BOXFORD: A3RTCM2EX CNC Router
SKU:
MMC400050
CNC ROUTER 3015 3000 X 1500MM
SKU:
MMC400055
CNC ROUTER: MG1630D ATC
SKU:
MMC400056
BOXFORD: MIDI TABLE 145 X 153MM
SKU:
MMC400110
* Dovetail slide construction
* Anti-Backlash nuts on all axes
* Three axis simultaneous operation
* Fully enclosed see through guarding for saftey and improved viewing
* Integrated electrical panel
* The PC controlled Boxford MidiMILL Vertical Machining Centre
* Operating on PC computer the inclusive user-friendly software has routines for Computer Aided Design (CAD) at both simple and sophisticated levels and will process designed components through to a full machining routine
* Latching emergency stop button
* Low voltage control circuitry
BOXFORD: 190VMC TABLE 410 X 130MM.
SKU:
MMC400120
* The PC controlled Boxford 190VMCxi is ideally suited to a class room environment and offers the perfect solution for high tech
* The Boxford software is an integrated suite of powerful CAD/CAM tools
* The CAD provides a variety of drawing tools including text fonts with excellent manipulation routines
* Incorporates hardware capable of continuous 3 axis movement utilising the latest Continuous Path Manufacturing technology:- This allows large programs imported from Major CAD/CAM packages to be machined efficiently and is an essential machine feature for successful Rapid Prototyping of 3D reliefs
* Overload cut-out on spindle drive
* Positive end stop on all axes
* Integrated electrical panel with no volt supply protection
* Feed rate override
* Feed hold
* Single block operation
BOXFORD: 300VMC TABLE 505 X 135MM.
SKU:
MMC400130
* The Boxford software is an integrated suite of powerful CAD/CAM tools
* The CAD provides a variety of drawing tools including text fonts with excellent manipulation routines
* Drawing from other CAD applications can also be imported and processed
* Manual Data Input allows programs to be entered using International Industrial programming conventions
* Touch sensitive control panel incorporating illuminated push buttons allows the machine to be operated without a computer
* Active and accurate tool path graphics continuously displayed line by line during program write test run and manufacture
CNC MILLING CENTRE: GL550L
SKU:
MMC400250
* CNC milling machine fitted with Seimens 808D controller
* Spindle taper is ISO20
* Fitted with 12 station ATC
* Comes with linear guide, matched with all servo motors
* This will ensure higher speed and accuracy
* Ideal training machine or small production centre
* Sfandard is fitted with jacking feet for leveling
* Two door cabinet storage for all accessories
GL550 ACCESSORY-COOLANT SYSTEM
SKU:
MMC400262
TURRET MILL: CNC BMT-2500V-NC
SKU:
MMC400400
TURRET MILL: CNC B3VC KNEE TYPE
SKU:
MMC400410
BED MILL: CNC K3VLC
SKU:
MMC400440
BED MILL: CNC B6FC 1000 X 450 X 570MM (TAIWAN)
SKU:
MMC400450
* Ideal production and jobbing shop
* Meehanite castings
* Turcite B coated slidways for reduced friction, longer life and better accuracy
* Auto lubrication to reduce wear
* Precision hand scrapiped spindle mounting to enhance the spindle stability and machining accuracy
* X Guidways are dovetail, Y & Z are boxway
BED MILL: CNC E320 MILL.MACHIN
SKU:
MMC400460
BED MILL: CNC BMT-1648UL
SKU:
MMC400500
BED MILL: CNC BMT-1654UL
SKU:
MMC400540
ENGRAVING MACH: VMC-560
SKU:
MMC400900
PIPE DRILL: 10 – 100MM CHAIN MOUNT
SKU:
PCC1002100
STATE DIES: 2-1/2 – 4″ NPT HSS
SKU:
PIA100550
STATE DIES: 5″ – 6″ NPT HSS
SKU:
PIA100560
PIPE THREADER: MANUAL 1/2″-2″ CAPACITY BSPT 6PC STATE
SKU:
PIT240010