- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
LATHE: SHOPTURN-280G 280 X 650 X 26MM BORE G/HEAD 1 PHASE
SKU:
L--165278
* Compact lgeared Head Lathe with 12 speed precision ground gears
* Induction hardened & precision ground bedways.
* Headstock is gear driven in oil bath.
* Forward/reverse & emergency stop switches.
* Tailstock can be offset for turning tapers.
* Covered leadscrews & limit switches for safety.
* Metric & imperial threading dial indicator.
* Extra wide bedway for more capacity.
* Ideal for hobbyists and small workshops.
* Stand is sold seperately.
WM-280 STAND: DELUXE MODEL
SKU:
L--165282
LATHE: WM-290V-F 290 X 700 X 38MM BORE V/SPEED DC MTR
SKU:
L--165288
* The WF290V-F bench lathe is fitted with a delta inverter and viariable speed control.
* Easy to read digital readout speed display.
* Induction hardened & precision ground bedways.
* Forward/reverse & emergency stop switches.
* Tailstock can be offset for turning tapers.
* Covered leadscrews & limit switches for safety.
* Longitudinal and cross feeds.
* Automatic feed & threading are fully interlocked.
* Fitted with quickchange toolpost.
* Ideal for hobbyists and small workshops.
* Stand is sold seperately.
LATHE: WM-290V 290 X 700 X 38MM BORE V/SPEED 1 PHASE
SKU:
L--165290
* The WF290V-F bench lathe is fitted with a delta inverter and viariable speed control.
* Easy to read digital readout speed display.
* Induction hardened & precision ground bedways.
* Forward/reverse & emergency stop switches.
* Tailstock can be offset for turning tapers.
* Covered leadscrews & limit switches for safety.
* Longitudinal feed.
* Automatic feed & threading are fully interlocked.
* Fitted with quickchange toolpost.
* Ideal for hobbyists and small workshops.
* Stand is sold seperately.
WM-290 STAND: DELUXE MODEL
SKU:
L--165292
LASER / CNC MILL / 3D PRINTING BENZEL
SKU:
LAS200900
GLOBAL 3000: HEATING TUBE FOR LASER
SKU:
LAS200907
GLOBAL 3000: PRINTING NOZZLE
SKU:
LAS200908
CNC LATHE: GOODWAY GLS-150
SKU:
LCN100400
CNC LATHE: GOODWAY GTS-150
SKU:
LCN100440
CNC LATHE: GOODWAY GS-400L
SKU:
LCN100460
CNC LATHE: GL-LD45
SKU:
LCN100640
* Heavy duty CNC lathe with big swing and optional centre distance of 2900mm & 3900mm * Spindle speeds can change acording to the motor selection * Available in 6 different bore sizes 6 9 12 14.5 16 20 * This is a very sturdy and well designed machine with a bed width of 660mm * Headstock is made from 'Meehanite' cast iron heat treated for rigidity *
CNC LATHE: GL-LF50
SKU:
LCN100650
* Heavy duty CNC lathe with big swing and centre distance from 2450mm to 10450mm * Spindle speeds can change with different motor selection * Available in two two spindle bore sizes - 153mm & 230mm * This is a very sturdy and well designed machine with 800mm bed width * Headstock is made by 'Meenhanite' cast iron heat treated for rigidity *
CNC LATHE: CMT-71 1800 X 4000MM
SKU:
LCN100660
CNC LATHE: GLOBAL GL-400R SIEMENS 808D 400 x 835MM
SKU:
LCN200400
CNC LATHE: SMTCL BRT4 SIEMENS 808D
SKU:
LCN200500
CNC LATHE: SMTCL CAK61135GI 610 X 1270MM
SKU:
LCN250110
CNC LATHE: RICHYOUNG RIC-TC1640N TEACH
SKU:
LCN260100
CNC LATHE: RICHYOUNG RIC-TC1740 TEACH
SKU:
LCN2601005
CNC LATHE: RICHYOUNG RIC-TC1800 TEACH
SKU:
LCN2601010
CNC LATHE: RICHYOUNG RIC-TC2140 TEACH
SKU:
LCN2601015
CNC LATHE: RICHYOUNG RIC-TC2560 TEACH
SKU:
LCN2601020
CNC LATHE: RICHYOUNG RIC-TC2580 TEACH
SKU:
LCN2601025
CNC LATHE: RICHYOUNG RIC-TC30160 TEACH
SKU:
LCN2601030
CNC LATHE/MILL: BOXFORD DUET
SKU:
LCN300120
* The Boxford 'Duet' dual purpose CNC training Lathe/Mill is an ideal machine which has been specially designed for educational purposes * Comes with Boxford CAD/CAM software using world standard M&G codes * Drawings from other CAD applications can be imported and processed * Standard IBM compatible PC computer is required to handle the user-friendly software * Horizontal it can be used as a lathe - when stood on end it becomes a milling machine *
CNC LATHE: BOXFORD 160TCL
SKU:
LCN300130
* The PC controlled Boxford 160TCL lathe is ideally suited to a class room environment and offers the perfect solution for hightech * The Boxford software is an integrated suite of powerful CAD/CAM tools * The machine rigidity and spindle torque allows a large variety of materials and components to be machined * Active and accurate tool path graphics continuously displayed line by line during program write test run and manufacture * Full perimeter guarding with interlocking switches on access doors arranged in the positive (saftey) mode for spindle stop and feed hold * Latching emergency stop button * Low voltage control circuitry *
CNC LATHE/MILL: BOXFORD MT2
SKU:
LCN300140
* The PC controlled Boxford MT2 combined lathe and mill is ideally suited to a classroom environment and offers the perfect solution for high tech * The unique combination Lathe Turret and 3rd Mill Axix allows steel to be cut to close tolerances * The Boxford software is an integrated suite of powerful CAD/CAM tools * As with all Boxford PC machines the MT2 incorporates hardware capable of continuous 3 axis movement and utilises Continuous Path Manufacture allowing large programs imported from Major CAD/CAM packages to be machined extremely efficiently:- This is particularly useful for Rapid Prototyping of 3D reliefs * Touch sensitive control panel incorporating illuminated push buttons allows the machines to be operated without a computer * Overload cut-out on spindle drive *
CNC LATHE: BOXFORD T220
SKU:
LCN300150
CNC LATHE: BOXFORD 250PC
SKU:
LCN300160
* Automatic CAM software * Operates from variety of computers * Cuts steel brass aluminium & plastic * 3D graphics * Slant bed construction * Operated by personal computer the 250PC Training Computer Lathe is ideally suited for all training requirements * CAM User friendly Software with 3D grphical simulation & automatic error checking * Constant surface speed * Single phase electricity power supply gives easy installation * 2 Feed modes (per rev / per min) * Links with 300VMC machining centre and robots in an FMS system *
CNC LATHE: JAGUAR 1650ENC
SKU:
LCN300650
CNC LATHE: JAGUAR 2060ENC
SKU:
LCN301070
* This 2060ENC teach lathe is of rigid construction with hardened & ground beds over HRC 50 * The main spindle is supported by selected and preloaded super precision bearings to ensure high accuracy through full speed range * The main spindle shafts & gears are made from high grade alloy steel which are hardened and precision ground * Automatic lubrication pump provides all slide-ways and two axes ballscrews continuous lubrication at all times * The Fagor 8055TC is user friendly and comes complete with digital SERCOS AC servo system * Features 11 colour monitor * Comes with 8 station turret.
CNC LATHE: JAGUAR 2180ENC
SKU:
LCN301080
CNC LATHE: JAGUAR 2080ENC
SKU:
LCN301100
* This Jaguar model teach lathe comes with Fagor 8040TC controller for CNC functions but simple to use * Spindle is supported by selected and preloaded super precision bearings to ensure high accuracy through the full speed range * The main spindle shaft and gears in the headstock are made from high grade alloy steel hardened and precision ground for high speed running and lower noise level * The automatic lubrication pump on the apron provides all slideways and two axes ballscrews lubrication continually * Comes with full length rear splash guard *
CNC LATHE: JAGUAR 2680ENC
SKU:
LCN301108
CNC LATHE: JAGUAR 3080ENC
SKU:
LCN301110
* This Jaguar model teach lathe comes with Fagor 8040TC controller for CNC functions but simple to use * Spindle is supported by selected and preloaded super precision bearings to ensure high accuracy through the full speed range * The main spindle shaft and gears are made from high grade alloy steel hardened and ground for high speed running and lower noise level * The automatic lubrication pump on the apron provides all slideways and two axis ballscrews lubrication continually * Comes with full length splash guard *
CNC LATHE: BEMATO BMT-660X1500
SKU:
LCN301150
Fagor 8055TC control LCD monitor. *Over head control console travels with sliding door. *One piece cast base made of high tensile cast iron.* 3 V bed ways hardened and ground for higher rigidity. *Z axis travel matches with centre distance. *Heavy duty tailstock with 2 steps feed. Headstock gears are molybdenum steel SCm21 hardened and precision ground for smooth running. *X & Z axis ball screws are C5 grade. *Repeatability accuracy +/-0.005mm. *Positioning accuracy +/-0.01mm. * Constant surface speed. *Automatic home searching
CNC LATHE: SLANT BED GLOBAL GL-0811 808D SEIG
SKU:
LCN301210
CNC LATHE: SLANT BED GLOBAL GL-2820 808D
SKU:
LCN301211
* Ideal for small production or training, with all the features of a large machine.
* Compact & manoeuvrable units.
* Slant bed on linear rails.
* Siemens 808D controller.
* Programming Siemens & ISO G code.
* One shot lubrication behind the saddle.
* Manual pulse generator handwheel.
* 8 station turret style toolholder, with 4 internal and 4 external toolholders.
* Full guarding with end opening door.
* Stand sold seperately
CNC LATHE: SLANT BED GLOBAL GL-1216 808D
SKU:
LCN301220
CNC LATHE: JESSEY 30120ENC CPU 8055FL
SKU:
LCN301250
CNC LATHE: SS-27 PROKING
SKU:
LCN303680
CNC LATHE: SA-45 PROKING
SKU:
LCN303700
LINISHER: WBG 75B x 2000 3HP 1 PHASE
SKU:
LIN250100
LINISHER: SDD75 BELT 150 x 2000 2.2KW 3 PHASE
SKU:
LIN250210
BELT GRINDER: BS-75 75 X 2000MM BELT 2.2 KW 1 PHASE
SKU:
LIN260130
BELT GRINDER: BS-75 75 X 2000MM BELT 3.0 KW 3 PHASE
SKU:
LIN260140
BELT GRINDER: BS-100 100 X 1220MM 2HP 1 PHASE
SKU:
LIN260190
* Flexible linishing machine with adjustable angling head
* Single sided wheel shaft supporting devise makes belt tension adjustment simple and easy also allows quick belt change
* Comes complete on stand
* Equiped with dust chute for conecting extraction system
* Available in both single and three phase
BELT GRINDER: 150 X 2000MM 4 HP 3 PHASE DUST EXTRACTION
SKU:
LIN260242
BELT GRINDER: S-75V -75MM BELT VERTICLE 3 PHASE
SKU:
LIN260246
MULTITOOL: CONTACT WHEEL 50 x 890MM BELT
SKU:
LIN260850
MULTITOOL: PA-362 W/O TABLE
SKU:
LIN260854
LINISHING ATTACHMENT: SUIT 4-1/2″ ANGLE GRINDER
SKU:
LIN260870
MILL/DRILL: E2 25MM 700 X 180MM V/SPEED 1PH WEISS
SKU:
MD-330200
* This New E2 machine incorporates most milling functions as well as the normal drilling operations.
* Rigid and durable construction.
* The table is hardened and ground to provide a hard wearing surface.
* A good size compound table allows accurate movement in X & Y direction.
* Fitted with variable speed motor for easy speed change and smooth running.
* This machine is also available with power feed.
MILL/DRILL: TPC-25 1HP 1PH WEISS
SKU:
MD-330258
MILL/DRILL: TPC-32 1.5HP 1PH WEISS
SKU:
MD-330260
MILL/DRILL: TPC-7045A PF & DRO W/STAND WEISS
SKU:
MD-330284
* Heavy cast square section column with dovetail slideway.
* Covers on both vertical & horizontal slideways.
* Heads can be tilted ±90°.
* Equipped with X and Y power feed units.
* Fitted with 2 axis digital readouts.
* Power rise & fall on the column.
* Fine down feed adjustment.
* Forward & reverse magnetic safety switch.
* Recycling coolant system with filters.
* Adjustable table travel stops.
* Adjustable depth gauge.
* Mounted on a heavy duty stand.
MILL/DRILL: GH-45V VARIABLE, DRO P/FEED CAST BASE P/QUILL WEISS
SKU:
MD-330285
* Precision mills, quiet & smooth running, yet solid & stable.
* Heavy cast square section column with dovetail slideway.
* Covers on both vertical & horizontal slideways.
* Heads can be tilted ±90°.
* Fine down feed adjustment.
* Forward & reverse magnetic safety switch.
* Recycling coolant system with filters.
* Adjustable table travel stops.
* Control box on swivel arm.
* Electrical box on back of column.
MILL/DRILL: WMD-45AV VARIABLE SPEED DRO P/FEED WEISS
SKU:
MD-330285W
* Precision mills, quiet & smooth running, yet solid & stable.
* Heavy cast square section column with dovetail slideway.
* Covers on both vertical & horizontal slideways.
* Heads can be tilted ±90°.
* Fine down feed adjustment.
* Forward & reverse magnetic safety switch.
* Recycling coolant system with filters.
* Adjustable table travel stops.
* Powerfeed on X-axis.
* Control box on swivel arm.
* Electrical box on back of column.
* Powered rise & fall of the milling head.
* Fitted with DRO
MILL/DRILL: GH-45A DRO P/FEED CAST BASE WEISS
SKU:
MD-330286
* This Mill/Drill has a 800x240mm table which is hardened and precision ground
* Head tilts 90 Deg` left & right with graduations for accurate settings
* Spindle is suported with Heavy Duty taper roller bearing for long service life
* Micro downfeed with positive spindle lock
* Ridgid verticle column for chatter free milling
* Adjustable table gibs
* Solid cast stand for stability
* Fittited with coolant system
* Comes with 3 axis DRO
* Including DRO for quill travel
* Auto feed on quill
MILL/DRILL: GH-45AP DRO P/FEED CAST BASE P/QUILL WEISS
SKU:
MD-330287
* This Mill/Drill has a 800x240mm table which is hardened and precision ground
* Head tilts 90 Deg` left & right with graduations for accurate settings
* Spindle is suported with Heavy Duty taper roller bearing for long service life
* Micro downfeed with positive spindle lock
* Ridgid verticle column for chatter free milling
* Adjustable table gibs
* Solid cast stand for stability
* Fittited with coolant system
* Comes with 3 axis DRO including quill travel
* this model has power freed to quill
MILL/DRILL: GL-45D WITH DRO 1PH
SKU:
MD-330288
* Precision mill, quiet & smooth running, yet solid & stable.
* Heavy cast square section column with dovetail slideway.
* Covers on both vertical & horizontal slideways.
* Head can be tilted ±90°.
* Fine down feed adjustment.
* Forward & reverse magnetic safety switch.
* Recycling coolant system with filters.
* Adjustable table travel stops.
* Adjustable depth gauge.
* Mounted on a heavy duty stand.
* Fitted with 2 axes digital readout.
MILL/DRILL: GL-45 1PH 1.5KW W/STAND
SKU:
MD-330290
* Precision mill, quiet & smooth running, yet solid & stable.
* Heavy cast square section column with dovetail slideway.
* Covers on both vertical & horizontal slideways.
* Head can be tilted ±90°.
* Fine down feed adjustment.
* Forward & reverse magnetic safety switch.
* Recycling coolant system with filters.
* Adjustable table travel stops.
* Adjustable depth gauge.
* Mounted on a heavy duty stand.
MILL/DRILL: WBM45-45 1.5KW 1PH BRUSHLESS MOTOR
SKU:
MD-330294
* Precision mill, quiet & smooth running, yet solid & stable.
* New brushless type motor offers consistant torque at all speeds.
* Heavy cast square section column with dovetail slideway.
* Covers on both vertical & horizontal slideways.
* Head can be tilted ±90°.
* Fine down feed adjustment.
* Forward & reverse magnetic safety switch.
* Recycling coolant system with filters.
* Adjustable table travel stops.
* Adjustable depth gauge.
* Mounted on a heavy duty stand.