- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
HYDRAULIC PRESS: 30 TON SUPER (Manual)
SKU:
HP-300149
HYDRAULIC PRESS: 50 TON FLOOR FHP-50 (MANUAL)
SKU:
HP-300150
HYDRAULIC PRESS: 50 TON FLOOR MPA-50 AIR ASSIST
SKU:
HP-300152
* Robust steel frame and heavy duty table.
* Foot operated pneumatic pump for quick setting up time.
* Manual hand pump for setting the pressure on the workpiece.
* Dual action pump for higher efficiency.
* Pressure gauge mounted in top of frame.
* Overload to 150%.
* Ram can be adjusted left and right on heavy duty ball bearings.
* Adjustable table height using side mounted winch.
* Ideal workshop press for repetitive use.
HYDRAULIC PRESS: 55 TON Hyd W/shop Press HPM-55
SKU:
HP-300159
HYDRAULIC PRESS: 60 TON Hyd HPM-60A
SKU:
HP-300160
HYDRAULIC PRESS: 75 TON AIR HYD PRESS (Manual)
SKU:
HP-300163
HYDRAULIC PRESS: 100 TON Hyd W/shop Press HPM-100A
SKU:
HP-300165
HYDRAULIC PRESS: 160 TON Hyd W/shop Press HPM-160A
SKU:
HP-300170
HYDRAULIC PRESS: 200 TON Hyd W/SHOP PRESS HPM-200A
SKU:
HP-300175
HYDRAULIC TYRE PRESS: 200 TON X 1500MM
SKU:
HP-300180
HYDRAULIC PRESS: 50 TON FLOOR SIDE & FOOT PUMP (RED) dont sell
SKU:
HP-300220
HYDRAULIC PRESS: 50 TON FLOOR (Manual)
SKU:
HP-300240
HYDRAULIC FLANGE SPREADER: 5 TON 19-28 STUD CAPACITY
SKU:
HP-300400
HYDRAULIC FLANGE SPREADER: 10 TON 31-41 STUD CAPACITY
SKU:
HP-300405
HYDRAULIC POWER PACK: 1HP 1PH 700 BAR 1 WAY
SKU:
HP-300480
* This is a standard onw way pump and is suitable for most applications.
* Lightweight and comes with carring handle.
* Two speed operation to reduce cycle time for improved productivity.
* 3 position valves: advance, hold & retract.
* All pumps are equipped with pressure gauges to minimise the risk of overload,.
* Maunual valve and motor control internal pressure and relief valve prevents overloading
* Working pressure is 700 bar
HYDRAULIC POWER PACK: 2.2KW 1PH 700 BAR 2 WAY
SKU:
HP-300482
* This HHB-630-II has a two way pump and is suitable for most applications.
* Lightweight and comes with carring handle.
* 3 position valves: advance, hold & retract.
* All pumps are equipped with pressure gauges to minimise the risk of overload,.
* Maunual valve and motor control internal pressure and relief valve prevents overloading
* Comes with a large 35 litre oil capacity reservior to suit multi-cylinder applications
* Will off long trouble free life in most work invoroments
* Working pressure 700 bar
HYDRAULIC POWER PACK: 0.75KW 1PH 700 BAR 2 WAY
SKU:
HP-300484
* This HHB-630B is a two way pump and is suitable for most applications.
* Lightweight and comes with carring handle.
* Two speed operation to reduce cycle time for improved productivity.
* 3 position valves: advance, hold & retract.
* All pumps are equipped with pressure gauges to minimise the risk of overload,.
* Maunual valve and motor control internal pressure and relief valve prevents overloading
* Working pressure is 700 bar
HYDRAULIC POWER PACK: 1HP 1PH 600 BAR 1 WAY
SKU:
HP-300486
* This is a standard one way pump and is suitable for most applications.
* Lightweight and portable comes with carring handle.
* Two speed operation to reduce cycle time for improved productivity.
* 3 position valves: advance, hold & retract.
* All pumps are equipped with pressure gauges to minimise the risk of overload,.
* Maunual valve and motor control internal pressure and relief valve prevents overloading
* Capacity is 600 bar
HYDRAULIC POWER PACK: 1HP 1PH 700 BAR 1 WAY F/SWITCH
SKU:
HP-300488
* This is a one way pump and is suitable for most applications.
* Lightweight and comes with carring handle
* Two speed operation to reduce cycle time for improved productivity.
* 3 position valves: advance, hold & retract.
* All pumps are equipped with pressure gauges to minimise the risk of overload,.
* Maunual valve and motor control internal pressure and relief valve prevents overloading
* Working pressure is 700 bar
* Fitted with foot switch for hands free operation
HYDRAULIC POWER PACK: 3KW 3PH 700 BAR 2 WAY F/SWITCH
SKU:
HP-300490
* This is a 2 way pump and is suitable for most applications.
* Lightweight and comes with carring handles
* Two speed operation to reduce cycle time for improved productivity.
* 3 position valves: advance, hold & retract.
* All pumps are equipped with pressure gauges to minimise the risk of overload,.
* Maunual valve and motor control internal pressure and relief valve prevents overloading
* Large 35 litre oil resovoir, means adequate capacity for multi-cylinder applications
Long, trouble free life in most demanding work inviroments
* Fitted with foot switch for hands free operation
HYDRAULIC POWER PACK: 5.5HP PETROL 700 BAR 2 WAY
SKU:
HP-300500
* This is a two way pump and is suitable for most applications.
* Lightweight and comes with carring handle
* Mauual control valve
* Can use with either single or double acting tools
* All pumps are equipped with pressure gauges to minimise the risk of overload,.
* Maunual valve and motor control internal pressure and relief valve prevents overloading
* Comes with 15 litre oil reservior
* Protective roll cage for use in tough inviroments
* Fitted with 6.5hp petrol motor with recoil start
* Working pressure is 700 bar
HYDRAULIC HOSE CRIMPER: RANGE 6-25MM MANUAL 27
SKU:
HTA570190
HYDRAULIC HOSE CRIMPER: RANGE 6-102MM 201
SKU:
HTA570200
HYDRAULIC HOSE CRIMPER: RANGE 6-51MM 501
SKU:
HTA570210
HYDRAULIC HOSE CRIMPER: MANUAL 6.0-51MM RANGE 38
SKU:
HTA570300
HYDRAULIC HOSE CRIMPER: RANGE 1/4 – 2.5″ 230V HC-64
SKU:
HTA570305
HYDRAULIC HOSE CRIMPER: RANGE 4-51MM 230V 1PH 502A
SKU:
HTA570310
* This 502A hose cripming machine is an ideal machine for site work
* Powered by 230v i phase motor with 300 Ton of clamping pressure
* Come complete with 10sets of dies with a range from 6.0mm to 51.0mm ( 1/4"-2")
* Fitted with 4 cast wheels for manoverability
* Tips for selecting the right die sets
* Die sets are an integral part of hose crimping machines, as they determine the size and shape of the crimp
* It’s important to select die sets that are compatible with the hose and fitting sizes you intend to use
* The right die set ensures that the crimp is uniform and leak-free
* To make the right choice you should…
* Consider the range of hose sizes you will be working with and ensure that the die sets can accommodate those sizes.
* Look for die sets that are easy to change and adjust, as this will save time and improve efficiency during the crimping process.
* Check the manufacturer’s specifications and guidelines for recommended die sets for your specific machine model.
HYDRAULIC HOSE CRIMPER: RANGE 6-51MM 12V 507
SKU:
HTA570312
HYDRAULIC HOSE CRIMPER: RANGE 6-51MM 230V 1PH 503
SKU:
HTA570315
* The KSD503 is suitable for most workshops
* Poewered by a powerful 3Kw 230V motor
* Produce 640 Ton of clamping pressure
* Foot - button crontrol - automatic fuction
* Comes with 10 sets of dies from 15.0 to 63.0mm
* Backlite control panel
Presure gauge to show what pressure is required
* Backed by 3 year warranty
* Quality machine with CE certificate
HYDRAULIC HOSE CRIMPER: RANGE 6-51MM 230V 1PH 52M
SKU:
HTA570320
* The KSD503 is suitable for most workshops
* Poewered by a powerful 3Kw 230V motor
* Produce 640 Ton of clamping pressure
* Foot - button crontrol - automatic fuction
* Comes with 10 sets of dies from 15.0 to 63.0mm
* Backlite control panel
Presure gauge to show what pressure is required
* Backed by 3 year warranty
* Quality machine with CE certificate
POWER HOSE CUTTER: RANGE 6-51MM 380V DUSTLESS
SKU:
HTA570352
HYDRAULIC WIRE ROPE CUTTER: 8-30MM MANUAL
SKU:
HTA570360
HYDRAULIC WIRE ROPE CUTTER: 8-40MM MANUAL
SKU:
HTA570364
HYDRAULIC HOSE SKIVER: 1/4″ – 2″ RANGE 12V MODEL 27
SKU:
HTA570370
CONTAINER: 1 LITRE PLASTIC ( EMPTY PLASTIC BOTTLE) box style
SKU:
LUB600901
CONTAINER: 4 LITRE PLASTIC
SKU:
LUB600910
CUSHION MAT: 1500X914X12MM
SKU:
MAT100000
* Anti-Fatigue matting
* These rubber mats have a series of round holes which allow for compression
* Ideal for workshops or where people in the workplace are standing all day
* Relieves stress and tired feet - when the mind wanders... an accident is just waiting to happen
* This is called Standing Worker Fatigue Syndrome (SWFS). Working muscles produce lactic acid making the muscles feel stiff and sore. Increasing flow helps flush out the lactic acid reducing fatigue and increasing safety
TUBE BENDER: 3/8″- 1″ MANUAL 6 FORMERS HHW-25S
SKU:
PB-132114
* Simple type manual type bench mounted tube bender.
* Ideal tool for accurate bending of mild steel tube up to 1280deg
* Range is 10 - 25mm diameter with wall thickness 0.8-2.0mm
* Bending formers can be inter-changed in seconds
* All the formers are made of steel for durability and log service life
* Optimum bending results without deformation or ripples
* Comes complete with heavy duty plastic case
PIPE BENDER: 1/2″ – 2″ HYD 6 FORMERS CHB-2
SKU:
PB-132116
PIPE BENDER: HYD TANNER 6-22MM HAND HELD HHW-22B
SKU:
PB-132120
* Simple type hydraulic pipe bender hand held,
* Simple trigger action to extend ram for bending.
* Suitable for bending soft copper, brass and aluminum tubes.
* Suitable for trades people involved in plumbing, air conditioning, refrigeration and hydraulic applications etc.
* Quick and easyy to change formers.
* Bending range to 90 degrees.
PIPE BENDER: 1/2″- 2″ TANNER AIR ASSIST HHW-2Q
SKU:
PB-132130
* This hydraulic pipe bender come mounted on three legs and 8 formers.
* This bender is air assisted and require air pressure pressure of 120psi.
Also can be used by hand without air assist
These benders are for precision cold bending of thick wall pipe (schedual 40-80)
* maximum bending range is 90deg
* This bender has a pipe range from 1/2" - 2"
* Great bender for workshops or farm maintenance etc
PIPE BENDER: 1/2″-3″ TANNER AIR ASSIT HHW-3Q
SKU:
PB-132135
* This hydraulic pipe bender come mounted on three legs and 8 formers.
* This bender is air assisted and require air pressure pressure of 120psi.
Also can be used by hand without air assist
These benders are for precision cold bending of thick wall pipe (schedual 40-80)
* maximum bending range is 90deg
* This bender has a range of 1/2" to 3" pipe
* Great bender for workshops or farm maintenance etc
PIPE BENDER: 12″- 2″ WITH CASTORS & 6PCS FORMERS HHW-2
SKU:
PB-132140
PIPE BENDER: 1/2″- 3″ WITH CASTORS & 8PCS FORMERS HHW-3
SKU:
PB-132142
PIPE BENDER: 1/2″- 2″ ON STAND 6PCS FORMERS HHW-2F
SKU:
PB-132144
PIPE BENDER: 1/2″- 2″ ON STAND 6PCS FORMERS HHW-2C
SKU:
PB-132146
Manual Hydraulic Pipe Benders
Model: HHW-2J,HHW-3J,HHW-4J
Characteristics:
The Manual Hydraulic Pipe Benders are designed for precision cold bending of thick-walled pipes (gas, water and steam pipes, non-heated black iron pipes, galvanized pipes, schedule 40 & 80) up to 900 following GB/T 3091,DIN 2440,EN 10255,BS1387 standards.
These benders are ideal for plumbing, sanitary and heating installationon on contruction sites, for apparatus and boiler making and for industrial applications.
Characteristics:
●Capable of bending angles from 0o to 90o on pipes ranging from 1/2”to 4”.
●Cold bending, no pre-warming of pipe is required.
●Works quicker with the two-speed, heavy-duty hydraulic pumping system.
●Comfortable working position with the tripod stand.
●Longer piston stroke per pumping and optimized hand force minimizes operator fatigue.
●Supplied in a wooden case with a set of bending shoes and service pack.
PIPE BENDER: 1/2″- 2″ MOTORISED 1PH TANNER – HHW-2D:
SKU:
PB-132150
* This hydraulic pipe bender come with tri stand
* Capable of bending angles 0 - 90 degrees
* No pre-warming required
* Fitted with seperate heavy duty pump
* Comfortable working height with tripod stand
* Longer pistion stroke means less strokes to achieve goal
* Supplied in wooden case with 6 formers and service packy.
PIPE BENDER: 1/2″- 3″ MOTORISED 1PH TANNER HHW-3D
SKU:
PB-132152
PIPE BENDER: TANNER HYDRAULIC HAND PUMP
SKU:
PB-132360
TANNER: BOBIN PIPE BENDER.
SKU:
PB-132371
TANNER: BOBIN PIN (EACH)
SKU:
PB-132372
FORMER: BRAMLEY 2″ ALLOY
SKU:
PB-134140