- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
GAGE BLOCK SET; 83 PC DASQUA GRADE 1
Excl. GST: $695.00
Incl. GST: $799.25
Incl. GST: $799.25
HYDRAULIC POWER PACK: 3KW 3PH 700 BAR 2 WAY F/SWITCH
Excl. GST: $2,950.00
Incl. GST: $3,392.50
Incl. GST: $3,392.50
PIPE BENDER: 1/2″- 2″ MOTORISED 1PH TANNER – HHW-2D:
Excl. GST: $1,145.00
Incl. GST: $1,316.75
* This hydraulic pipe bender come with tri stand
* Capable of bending angles 0 – 90 degrees
* No pre-warming required
* Fitted with seperate heavy duty pump
* Comfortable working height with tripod stand
* Longer pistion stroke means less strokes to achieve goal
* Supplied in wooden case with 6 formers and service packy.
| Weight | 70 kg |
|---|---|
| Dimensions | 0.96 × 0.35 × 0.32 cm |
In stock
Description
| Description | Motorised Pipe Bender |
|---|---|
| Range | 1/2 – 2″ |
| Formers (pc) | 6 |
| Sizes (inch) | 1/2, 3/4, 1, 1-1/4, 1-1/2, 2″ |
| Pump (Ton) | 13 |
| Max Stroke (mm) | 250 |
| Wall Thickness (mm) | 2.75 – 4.5 |
| Motor Power (kW) | 0.75 |
| Voltage (V) | 230 |
| Weight (kg) | 70 |
| Volume (m³) | 0.1075cm |
| Packing Size L x W x H (mm) | 960 x 350 x 320 |
Shipping & Delivery
Related products
PIPE BENDER: 16000KG AIR-HYDRAULIC
SKU:
PB-131105
TUBE BENDER: 3/8″- 1″ MANUAL 6 FORMERS HHW-25S
SKU:
PB-132114
* Simple type manual type bench mounted tube bender.
* Ideal tool for accurate bending of mild steel tube up to 1280deg
* Range is 10 - 25mm diameter with wall thickness 0.8-2.0mm
* Bending formers can be inter-changed in seconds
* All the formers are made of steel for durability and log service life
* Optimum bending results without deformation or ripples
* Comes complete with heavy duty plastic case
PIPE BENDER: 1/2″ – 2″ HYD 6 FORMERS CHB-2
SKU:
PB-132116
PIPE BENDER: 1/2″- 3″ WITH CASTORS & 8PCS FORMERS HHW-3
SKU:
PB-132142
PIPE BENDER: 1/2″- 3″ MOTORISED 1PH TANNER HHW-3D
SKU:
PB-132152
PIN: TO RETAIN BOBIN
SKU:
PB-134144
HYD SEAL KIT: PIPE BENDER BRAMLEY
SKU:
PB-134145
PIPE BENDER: TANNER HHW-40A HYDRAULIC
SKU:
PB-134300
* Simple type mechanical/hydraulic pipe bending machine complete with fine formers.
* Manual clamping of bending dies with quick release clamp.
* Setting the angle is by digital readout on the control panel.
* Bending operation is activated by remote foot control.
* A total of 33 sets of dies are available for this model.