- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
AIRLINE HOOD & VISOR: COMPLETE UNIT
SKU:
DE-100010
FILTERATION ASSEMBLY: 1/2″ 4PC W/FITTINGS
SKU:
DE-100020
WELDING ROD OVEN
SKU:
FUR200010
GENERATOR/WELDER: 6.0KW DIESEL WHEELS/HANDLE 1PH
SKU:
GEN600315
* This Vision portable diesel generator/welder is perfect for site work or worshop use.
* Very economical running delivering regulated power based on load factor.
* Open frame construction mount on heavy duty wheels for easy maneuverability.
* Front handle for easy parking.
* Supplied with battery for starting - also has recoil start facility.
GENERATOR/WELDER: 6.0KV PETROL INVERTER 1PH WDF-200
SKU:
GEN600316
* This VF-250 petrol inverter generator/welder is perfect for site work or worshop use.
* Very economical running delivering regulated power based on load factor.
* Open frame construction mount on heavy duty wheels for easy maneuverability.
* Front handle for easy parking.
* Supplied with battery for starting - also has recoil start facility.
* This machine incorporates the latest adopted medium frequency permanent magnet technology and SCM control system.
* Full power, lightweight, compact and advanced frame structure.
* Twin 230v power outlets let you use electric power tools at the same time.
* Stick welding (acid and basic electrodes ) as well as TIG/MIG.
* Digital technology for control module modularization.
GENERATOR/WELDER: 130A PETROL INVERTER 1PH
SKU:
GEN600328
* This WPI-130 Digital inverter welder/generator comes with manual pull start.
* Fitted with AVR voltage regulator for constant voltage delivery.
* Capabil of welding rods from 1.6mm to 3.2mm.
* Dual purpose machine with 230v 3 pin plug outlet for running a light or grinder etc 1090
* Fitted with EW35-50 large size welding pin outlets.
* Large 15 litre fuel tank giving 8hrs run time.
* DC Welding and AC generator output.
* DC60A.DCI120A Two stages DC welding
* Comes with 350A x 8M welding and earth leads with holder and earth clamp *
GENERATOR/WELDER: 190A HWA-DAN PETROL INVERTER 1PH
SKU:
GEN600330
* This HAXQ1 inverter welder/generator comes with electric start.
* Fitted with AVR voltage regulator for constant voltage delivery.
* Capabil of welding rods from 1.6mm to 5.0mm.
* Dual purpose machine with 230v 3 pin plug outlet for running a light or grinder etc
* Fitted with EW35-50 large size welding pin outlets.
* Large 15 litre fuel tank giving 8hrs run time.
* DC Welding and AC generator output and 12V connections *
GENERATOR/WELDER: WD600 DIESEL PIPELINE WORKSTATION
SKU:
GEN600360
* This WD-600 DC power welder/generator workstation is fitted with the reliable Kubota diesel engine for maximum performance and reliability.
* Fitted with AVR brushless excitation voltage regulator for constant voltage delivery.
* This Tri-Phase machine is fitted with EW35-50 large size welding pin outlets x 2, Power outlets 230V x 2, Three phase 400V outlet x 1.
* Welding current can be adjusted by remote control which is supplied with this machine.
* The flux core sami-automatic welding can be realised by matching Millar, Lincoln or Senci wire feeder.
* The wire feeding speed and welding voltage can be adjusted on the SC100 wire feeder.
* The welding current can be preset and adjusted in MMA gear.
* Dual handles can be output independantly or in parallel, which can achive greater current and power output.
GENERATOR/WELDER: WD1000 DIESEL PIPELINE WORKSTATION
SKU:
GEN600380
* This WD-1000 DC power welder/generator workstation is fitted with the reliable Kubota diesel engine for maximum performance and reliability * Fitted with AVR brushless excitation voltage regulator for constant voltage delivery * This Tri-Phase machine is fitted with EW35-50 large size welding pin outlets x 2, Power outlets 230V x 2, Three phase 400V outlet x 1 * Welding current can be adjusted by remote control which is supplied with this machine * The flux core sami-automatic welding can be realised by matching Millar, Lincoln or Senci wire feeder. The wire feeding speed and welding voltage can be adjusted on the SC100 wire feeder *The welding current can be preset and adjusted in MMA gear * Dual handles can be output independantly or in parallel, which can achive greater current and power output *
CRC; WELD ANTI-SPATTER 400ML
SKU:
LUB424430
* CRC Weld Anti-Spatter is an advanced technology lubricant formulated with a blend of relaase agents to prevent welding spatter from permanently adhering to surrounding metal surfaces * It quickly forms an efficient heat-resistant coating and eliminates the need to chisel or grind spatter after welding *
SUPERON: SUPER CLEANER 400ML
SKU:
LUB426678
ONLY SOLD IN PACKS OF 12
* Superon Super Cleaner * Will detect surface deformities on all non-porous materials ( Metals, plastics, ceramics) * Used to detect welding, casting and forging defects * Also cracks, & leaks in new components and fatigue cracks in used parts * Will detect a wide range of flaws up to 1 micron to 30 microns in depth * Superior capillary action, non-toxic, non-corrosive * Conforms to MIL 1-25135, MIL-STD 271, IS: 3658-1981 Code of Practice Key Application Areas: * Evaluation of micro surface defects and flaws in weld deposits * Wrought iron and cast deposits * Ferrour and non-ferrous metals * Powder metallurgy parts * Ceramics, Plastics & glass objects
SUPERON: WELD SUPER ANTI-SPATTER (E) 350ML
SKU:
LUB426680
* Superon Weld Anti-Spatter is an advanced technology lubricant formulated with a blend of relaase agents to prevent welding spatter from permanently adhering to surrounding metal surfaces
* It quickly forms an efficient heat-resistant coating and eliminates the need to chisel or grind spatter after welding
* Superon (E) series is a waterbased heavy duty thin dry cvleas coating which is non-inflammable and keeps nozzles clean and prevents splatter build up
SUPERON: SUPER NOZZLE DIP GEL 300GM
SKU:
LUB426690
* Superon "Super Nozzel Dip Gel" is an advanced heavy duty technology advanced non-drip propietary polymer designed to prevent the accumulation of weld splatter from adhering to the welding torch nozzle both interior and exterior surfaces
* Facilitates smooth welding and reduces downtime by avoiding splatter build-up and repeated cleaning of the welding tips during the welding process
* No adverse affect on the type of welding
* Non-toxix and non fuming formulation
MIG TIPS: 0.8MM TIP M6
SKU:
SMW100210
MIG TIPS: 9 X 1.2
SKU:
SMW100220
DIFUSERS: 224.08.02 GAS NOZZLE
SKU:
SMW100250
TIPS: 1.6MM 2% THORIATED
SKU:
SMW100304
TIPS: 2.4MM 2% THORIATED
SKU:
SMW100306
SWITCH: UNI 4-POS 425/390/345
SKU:
SMW100500
MIG TORCH: EURO FITTING
SKU:
SMW300300
250A MIG/MAG: COIL HOLDER
SKU:
SMW300310
SUPER MIG 70S-6 WIRE 1.00 250Kg DRUM PACK
SKU:
SUP1000070
* Superon mild steel mig wire come in a 15kg spool * Superon ER70S-6 is a 15Kg 300mm Ø spool of copper coated low carbon all-positional Mig welding wire. This wire has excellent welding performance with a stable arc and less spatter, ER70S-6 is the most common wire for welding mild and medium strength steels. For best results keep wire clean and free from moisture and use with Argon/C02 Mix shielding gas for general Mig welding.
ADVANTAGES:Smooth feeding
Exceptionally smooth weld performance. Low fume. Low spatter.
SHIELDING GAS: Argon/C02 Mix
CLASSIFICATION:
AS/NZS 14341
AWS/ASME-SFA A5:18 ER70S-6
EN ISO 14341-A-G 42 4 M21 3Si1
SUPER MIG 70S-6 WIRE 1.20 250Kg DRUM PACK
SKU:
SUP1000072
* Superon mild steel mig wire come in a 15kg spool * Superon ER70S-6 is a 15Kg 300mm Ø spool of copper coated low carbon all-positional Mig welding wire. This wire has excellent welding performance with a stable arc and less spatter, ER70S-6 is the most common wire for welding mild and medium strength steels. For best results keep wire clean and free from moisture and use with Argon/C02 Mix shielding gas for general Mig welding.
ADVANTAGES:Smooth feeding
Exceptionally smooth weld performance. Low fume. Low spatter.
SHIELDING GAS: Argon/C02 Mix
CLASSIFICATION:
AS/NZS 14341
AWS/ASME-SFA A5:18 ER70S-6
EN ISO 14341-A-G 42 4 M21 3Si1
MIG WIRE: 70S-6 0.8MM SUPERON 15KG SPOOL
SKU:
SUP1000100
* Superon mild steel mig wire come in a 15kg spool * Superon ER70S-6 is a 15Kg 300mm Ø spool of copper coated low carbon all-positional Mig welding wire. This wire has excellent welding performance with a stable arc and less spatter, ER70S-6 is the most common wire for welding mild and medium strength steels. For best results keep wire clean and free from moisture and use with Argon/C02 Mix shielding gas for general Mig welding.
ADVANTAGES:Smooth feeding
Exceptionally smooth weld performance. Low fume. Low spatter.
SHIELDING GAS: Argon/C02 Mix
CLASSIFICATION:
AS/NZS 14341
AWS/ASME-SFA A5:18 ER70S-6
EN ISO 14341-A-G 42 4 M21 3Si1
MIG WIRE: 70S-6 1.0MM SUPERON 15KG SPOOL
SKU:
SUP1000116
* Superon mild steel mig wire come in a 15kg spool * Superon ER70S-6 is a 15Kg 300mm Ø spool of copper coated low carbon all-positional Mig welding wire. This wire has excellent welding performance with a stable arc and less spatter, ER70S-6 is the most common wire for welding mild and medium strength steels. For best results keep wire clean and free from moisture and use with Argon/C02 Mix shielding gas for general Mig welding.
ADVANTAGES:Smooth feeding
Exceptionally smooth weld performance. Low fume. Low spatter.
SHIELDING GAS: Argon/C02 Mix
CLASSIFICATION:
AS/NZS 14341
AWS/ASME-SFA A5:18 ER70S-6
EN ISO 14341-A-G 42 4 M21 3Si1
MIG WIRE: 70S-6 1.2MM SUPERON 15KG SPOOL
SKU:
SUP1000120
* Superon mild steel mig wire come in a 15kg spool * Superon ER70S-6 is a 15Kg 300mm Ø spool of copper coated low carbon all-positional Mig welding wire. This wire has excellent welding performance with a stable arc and less spatter, ER70S-6 is the most common wire for welding mild and medium strength steels. For best results keep wire clean and free from moisture and use with Argon/C02 Mix shielding gas for general Mig welding.
ADVANTAGES:Smooth feeding
Exceptionally smooth weld performance. Low fume. Low spatter.
SHIELDING GAS: Argon/C02 Mix
CLASSIFICATION:
AS/NZS 14341
AWS/ASME-SFA A5:18 ER70S-6
EN ISO 14341-A-G 42 4 M21 3Si1
MIG WIRE: ER 316L-LSI 0.8MM SUPERON 12.5KG SPOOL
SKU:
SUP1000200
SUPERMIG 316LSi is a G 19 12 3 LSi/ER 316LSi type solid MAG welding wire, supplied precision layer wound, depositing a low C-19Cr12Ni2.5Mo weld metal. Suitable for use with Ar+2%O2 or Ar+0.5…5%CO2 mixed shielding gases.
SUPERMIG 316LSi is used for welding of 316 and 316L grade stainless steels, in a wide range of applications including the fabrication of pipe and plate. The higher Si level results in a smooth weld bead shape and even appearance with excellent toe blending particularly in fillet welds. The weld metal has a high resistance to pitting and crevice corrosion by non-oxidizing acids. Used for applications with service temperatures <400°C.
Precision layer winding technologies ensure smooth, virtually trouble-free feeding.
MIG WIRE: ER 316L-LSI 0.9MM SUPERON 12.5KG SPOOL
SKU:
SUP1000202
SUPERMIG 316LSi is a G 19 12 3 LSi/ER 316LSi type solid MAG welding wire, supplied precision layer wound, depositing a low C-19Cr12Ni2.5Mo weld metal. Suitable for use with Ar+2%O2 or Ar+0.5…5%CO2 mixed shielding gases.
SUPERMIG 316LSi is used for welding of 316 and 316L grade stainless steels, in a wide range of applications including the fabrication of pipe and plate. The higher Si level results in a smooth weld bead shape and even appearance with excellent toe blending particularly in fillet welds. The weld metal has a high resistance to pitting and crevice corrosion by non-oxidizing acids. Used for applications with service temperatures <400°C.
Precision layer winding technologies ensure smooth, virtually trouble-free feeding.
MIG WIRE: ER 316L-LSI 1.0MM SUPERON 12.5KG SPOOL
SKU:
SUP1000204
SUPERMIG 316LSi is a G 19 12 3 LSi/ER 316LSi type solid MAG welding wire, supplied precision layer wound, depositing a low C-19Cr12Ni2.5Mo weld metal. Suitable for use with Ar+2%O2 or Ar+0.5…5%CO2 mixed shielding gases.
SUPERMIG 316LSi is used for welding of 316 and 316L grade stainless steels, in a wide range of applications including the fabrication of pipe and plate. The higher Si level results in a smooth weld bead shape and even appearance with excellent toe blending particularly in fillet welds. The weld metal has a high resistance to pitting and crevice corrosion by non-oxidizing acids. Used for applications with service temperatures <400°C.
Precision layer winding technologies ensure smooth, virtually trouble-free feeding.
MIG WIRE: ER 316L-LSI 1.2MM SUPERON 12.5KG SPOOL
SKU:
SUP1000206
*SUPERMIG 316LSi is a G 19 12 3 LSi/ER 316LSi type solid MAG welding wire, supplied precision layer wound, depositing a low C-19Cr12Ni2.5Mo weld metal. Suitable for use with Ar+2%O2 or Ar+0.5…5%CO2 mixed shielding gases.
SUPERMIG 316LSi is used for welding of 316 and 316L grade stainless steels, in a wide range of applications including the fabrication of pipe and plate. The higher Si level results in a smooth weld bead shape and even appearance with excellent toe blending particularly in fillet welds. The weld metal has a high resistance to pitting and crevice corrosion by non-oxidizing acids. Used for applications with service temperatures <400°C.
Precision layer winding technologies ensure smooth, virtually trouble-free feeding.
MIG WIRE: ER 308L-LSI 0.8MM SUPERON 12.5KG SPOOL
SKU:
SUP1000220
MIGarc ER308 Lsi Is a stainless steel MIG wire with high silicon levels to improve arc characteristics and weld pool fluidity, and flatten weld bead profile Low carbon increases resistance to corrosion and maintains mechanical properties, it is used for general purpose applications where corrosion conditions are moderate.
Used mostlly in the industry for welding 304 stainless steel
* Silicon Content Improves Wetting Behaviour *
* Good Operator Appeal *
* Moderate Corrosion Resistance *
* Argon Based Shielding Gas *
* All-Positional Welding Wire *
MIG WIRE: HWIRE ALLOY 5356 0.9MM 0.5KG
SKU:
SUP1000222A
MIGarc ER308 Lsi Is a stainless steel MIG wire with high silicon levels to improve arc characteristics and weld pool fluidity, and flatten weld bead profile Low carbon increases resistance to corrosion and maintains mechanical properties, it is used for general purpose applications where corrosion conditions are moderate.
Used mostlly in the industry for welding 304 stainless steel
* Silicon Content Improves Wetting Behaviour *
* Good Operator Appeal *
* Moderate Corrosion Resistance *
* Argon Based Shielding Gas *
* All-Positional Welding Wire *
MIG WIRE: ER 308L-LSI 1.0MM SUPERON 12.5KG SPOOL
SKU:
SUP1000224
MIGarc ER308 Lsi Is a stainless steel MIG wire with high silicon levels to improve arc characteristics and weld pool fluidity, and flatten weld bead profile Low carbon increases resistance to corrosion and maintains mechanical properties, it is used for general purpose applications where corrosion conditions are moderate.
Used mostlly in the industry for welding 304 stainless steel
* Silicon Content Improves Wetting Behaviour *
* Good Operator Appeal *
* Moderate Corrosion Resistance *
* Argon Based Shielding Gas *
* All-Positional Welding Wire *
MIG WIRE: ER 308L-LSI 1.2MM SUPERON 12.5KG SPOOL
SKU:
SUP1000226
MIGarc ER308 Lsi Is a stainless steel MIG wire with high silicon levels to improve arc characteristics and weld pool fluidity, and flatten weld bead profile Low carbon increases resistance to corrosion and maintains mechanical properties, it is used for general purpose applications where corrosion conditions are moderate.
Used mostlly in the industry for welding 304 stainless steel
* Silicon Content Improves Wetting Behaviour *
* Good Operator Appeal *
* Moderate Corrosion Resistance *
* Argon Based Shielding Gas *
* All-Positional Welding Wire *
MIG WIRE: ER 309L-LSI 0.8MM SUPERON 12.5KG SPOOL
SKU:
SUP1000230
UPERMIG 309LSi is a G 23 12 LSi/ER 309LSi type solid MAG welding wire, supplied precision layer wound, depositing a low C-23Cr12Ni weld metal. Suitable for use with Ar+2%O2 or Ar+0.5-5%CO2 mixed shielding gases.
SUPERMIG 309LSi is used for the welding of stainless steels to mild and medium tensile steels. It is used for depositing intermediate layers on steel prior to depositing 308 grade stainless steel. Also used for the welding of clad steels where service temperatures are below 300°C. The weld metal has a delta-ferrite content of ~12% resulting in a high resistance to hot cracking. The increased silicon content results in increased weld pool fluidity to give a smooth deposit appearance.
Precision layer winding technologies ensure smooth, virtually trouble-free feeding.
MIG WIRE: ER 309L-LSI 0.9MM SUPERON 12.5KG SPOOL
SKU:
SUP1000232
UPERMIG 309LSi is a G 23 12 LSi/ER 309LSi type solid MAG welding wire, supplied precision layer wound, depositing a low C-23Cr12Ni weld metal. Suitable for use with Ar+2%O2 or Ar+0.5-5%CO2 mixed shielding gases.
SUPERMIG 309LSi is used for the welding of stainless steels to mild and medium tensile steels. It is used for depositing intermediate layers on steel prior to depositing 308 grade stainless steel. Also used for the welding of clad steels where service temperatures are below 300°C. The weld metal has a delta-ferrite content of ~12% resulting in a high resistance to hot cracking. The increased silicon content results in increased weld pool fluidity to give a smooth deposit appearance.
Precision layer winding technologies ensure smooth, virtually trouble-free feeding.
MIG WIRE: ER 309L-LSI 1.0MM SUPERON 12.5KG SPOOL
SKU:
SUP1000234
UPERMIG 309LSi is a G 23 12 LSi/ER 309LSi type solid MAG welding wire, supplied precision layer wound, depositing a low C-23Cr12Ni weld metal. Suitable for use with Ar+2%O2 or Ar+0.5-5%CO2 mixed shielding gases.
SUPERMIG 309LSi is used for the welding of stainless steels to mild and medium tensile steels. It is used for depositing intermediate layers on steel prior to depositing 308 grade stainless steel. Also used for the welding of clad steels where service temperatures are below 300°C. The weld metal has a delta-ferrite content of ~12% resulting in a high resistance to hot cracking. The increased silicon content results in increased weld pool fluidity to give a smooth deposit appearance.
Precision layer winding technologies ensure smooth, virtually trouble-free feeding.
MIG WIRE: ER 309L-LSI 1.2MM SUPERON 12.5KG SPOOL
SKU:
SUP1000236
UPERMIG 309LSi is a G 23 12 LSi/ER 309LSi type solid MAG welding wire, supplied precision layer wound, depositing a low C-23Cr12Ni weld metal. Suitable for use with Ar+2%O2 or Ar+0.5-5%CO2 mixed shielding gases.
SUPERMIG 309LSi is used for the welding of stainless steels to mild and medium tensile steels. It is used for depositing intermediate layers on steel prior to depositing 308 grade stainless steel. Also used for the welding of clad steels where service temperatures are below 300°C. The weld metal has a delta-ferrite content of ~12% resulting in a high resistance to hot cracking. The increased silicon content results in increased weld pool fluidity to give a smooth deposit appearance.
Precision layer winding technologies ensure smooth, virtually trouble-free feeding.
MIG WIRE: ER 2209 0.8MM SUPERON 12.5KG SPOOL
SKU:
SUP1000240
SUPERMIG 2209 is a G 22 9 3 N L/ ER 2209 type solid MIG welding wire supplied precision layer wound, depositing a low C-22Cr8Ni3Mo weld metal suitable for use with Ar+2%O2 or Ar+0.5…5%CO2 mixed shielding gases.
SUPER MIG 2209 is used for the welding of duplex stainless steels in a range of applications including the fabrication of pipe and plate.
The weld metal provides a high resistance to pitting and stress corrosion cracking especially in high chloride media. The nickel is over matches the parent material by 2-3% to provide an optimum balance of austenite and ferrite in the as welded condition.
Precision layer winding technologies ensure smooth, virtually trouble-free feeding.
MIG WIRE: ER 2209 0.9MM SUPERON 12.5KG SPOOL
SKU:
SUP1000242
SUPERMIG 2209 is a G 22 9 3 N L/ ER 2209 type solid MIG welding wire supplied precision layer wound, depositing a low C-22Cr8Ni3Mo weld metal suitable for use with Ar+2%O2 or Ar+0.5…5%CO2 mixed shielding gases.
SUPER MIG 2209 is used for the welding of duplex stainless steels in a range of applications including the fabrication of pipe and plate.
The weld metal provides a high resistance to pitting and stress corrosion cracking especially in high chloride media. The nickel is over matches the parent material by 2-3% to provide an optimum balance of austenite and ferrite in the as welded condition.
Precision layer winding technologies ensure smooth, virtually trouble-free feeding.
MIG WIRE: ER 2209 1.0MM SUPERON 12.5KG SPOOL
SKU:
SUP1000244
SUPERMIG 2209 is a G 22 9 3 N L/ ER 2209 type solid MIG welding wire supplied precision layer wound, depositing a low C-22Cr8Ni3Mo weld metal suitable for use with Ar+2%O2 or Ar+0.5…5%CO2 mixed shielding gases.
SUPER MIG 2209 is used for the welding of duplex stainless steels in a range of applications including the fabrication of pipe and plate.
The weld metal provides a high resistance to pitting and stress corrosion cracking especially in high chloride media. The nickel is over matches the parent material by 2-3% to provide an optimum balance of austenite and ferrite in the as welded condition.
Precision layer winding technologies ensure smooth, virtually trouble-free feeding.
MIG WIRE: ER 2209 1.2MM SUPERON 12.5KG SPOOL
SKU:
SUP1000246
SUPERMIG 2209 is a G 22 9 3 N L/ ER 2209 type solid MIG welding wire supplied precision layer wound, depositing a low C-22Cr8Ni3Mo weld metal suitable for use with Ar+2%O2 or Ar+0.5…5%CO2 mixed shielding gases.
SUPER MIG 2209 is used for the welding of duplex stainless steels in a range of applications including the fabrication of pipe and plate.
The weld metal provides a high resistance to pitting and stress corrosion cracking especially in high chloride media. The nickel is over matches the parent material by 2-3% to provide an optimum balance of austenite and ferrite in the as welded condition.
Precision layer winding technologies ensure smooth, virtually trouble-free feeding.
TIG WIRE: ER 2209 0.8MM X 1000MM SUPERON 5KG TUBE
SKU:
SUP1000249
SUPERMIG 2209 is a G 22 9 3 N L/ ER 2209 type solid MIG welding wire supplied precision layer wound, depositing a low C-22Cr8Ni3Mo weld metal suitable for use with Ar+2%O2 or Ar+0.5…5%CO2 mixed shielding gases.
SUPER MIG 2209 is used for the welding of duplex stainless steels in a range of applications including the fabrication of pipe and plate.
The weld metal provides a high resistance to pitting and stress corrosion cracking especially in high chloride media. The nickel is over matches the parent material by 2-3% to provide an optimum balance of austenite and ferrite in the as welded condition.
Precision layer winding technologies ensure smooth, virtually trouble-free feeding.
TIG WIRE: ER316l/LS1 0.80 X 1000MM SUPERON 5KG TUBE
SKU:
SUP1000250
SUPERTIG 2209 is a W 22 9 3 NL/ ER 2209 type solid TIG welding rod depositing a low C 22Cr 8Ni 3Mo weld metal. Suitable for use mainly with Ar shielding gas. SUPERTIG 2209 is used for the welding of duplex stainless steels in a range of applications including the Fabrication of pipe and plate.
The weld metal provides a high resistance to pitting and stress corrosion cracking especially in high chloride media. The weld metal nickel content over matches the parent material by 2-3% to provide an optimum balance of austenite and ferrite in the as welded condition.
Corrosion Resistance:- Corresponding to ER 2209 i.e. fairly good under severe conditions such as oxidising and cold dilute reducing acids.
TIG WIRE: ER316L/LS1 0.90 X 1000MM SUPERON 5KG TUBE
SKU:
SUP1000252
SUPERTIG 2209 is a W 22 9 3 NL/ ER 2209 type solid TIG welding rod depositing a low C 22Cr 8Ni 3Mo weld metal. Suitable for use mainly with Ar shielding gas. SUPERTIG 2209 is used for the welding of duplex stainless steels in a range of applications including the Fabrication of pipe and plate.
The weld metal provides a high resistance to pitting and stress corrosion cracking especially in high chloride media. The weld metal nickel content over matches the parent material by 2-3% to provide an optimum balance of austenite and ferrite in the as welded condition.
Corrosion Resistance:- Corresponding to ER 2209 i.e. fairly good under severe conditions such as oxidising and cold dilute reducing acids.
TIG WIRE: ER316L/LS1 1.00 X 1000MM SUPERON 5KG TUBE
SKU:
SUP1000254
SUPERTIG 2209 is a W 22 9 3 NL/ ER 2209 type solid TIG welding rod depositing a low C 22Cr 8Ni 3Mo weld metal. Suitable for use mainly with Ar shielding gas. SUPERTIG 2209 is used for the welding of duplex stainless steels in a range of applications including the Fabrication of pipe and plate.
The weld metal provides a high resistance to pitting and stress corrosion cracking especially in high chloride media. The weld metal nickel content over matches the parent material by 2-3% to provide an optimum balance of austenite and ferrite in the as welded condition.
Corrosion Resistance:- Corresponding to ER 2209 i.e. fairly good under severe conditions such as oxidising and cold dilute reducing acids.
TIG WIRE: ER316L/LS1 1.20 X 1000MM SUPERON 5KG TUBE
SKU:
SUP1000256
SUPERTIG 2209 is a W 22 9 3 NL/ ER 2209 type solid TIG welding rod depositing a low C 22Cr 8Ni 3Mo weld metal. Suitable for use mainly with Ar shielding gas. SUPERTIG 2209 is used for the welding of duplex stainless steels in a range of applications including the Fabrication of pipe and plate.
The weld metal provides a high resistance to pitting and stress corrosion cracking especially in high chloride media. The weld metal nickel content over matches the parent material by 2-3% to provide an optimum balance of austenite and ferrite in the as welded condition.
Corrosion Resistance:- Corresponding to ER 2209 i.e. fairly good under severe conditions such as oxidising and cold dilute reducing acids.
TIG WIRE: ER316L/LS1 1.60 X 1000MM SUPERON 5KG TUBE
SKU:
SUP1000258
SUPERTIG 2209 is a W 22 9 3 NL/ ER 2209 type solid TIG welding rod depositing a low C 22Cr 8Ni 3Mo weld metal. Suitable for use mainly with Ar shielding gas. SUPERTIG 2209 is used for the welding of duplex stainless steels in a range of applications including the Fabrication of pipe and plate.
The weld metal provides a high resistance to pitting and stress corrosion cracking especially in high chloride media. The weld metal nickel content over matches the parent material by 2-3% to provide an optimum balance of austenite and ferrite in the as welded condition.
Corrosion Resistance:- Corresponding to ER 2209 i.e. fairly good under severe conditions such as oxidising and cold dilute reducing acids.
TIG WIRE: ER316L/LS1 2.00 X 1000MM SUPERON 5KG TUBE
SKU:
SUP1000260
SUPERTIG 2209 is a W 22 9 3 NL/ ER 2209 type solid TIG welding rod depositing a low C 22Cr 8Ni 3Mo weld metal. Suitable for use mainly with Ar shielding gas. SUPERTIG 2209 is used for the welding of duplex stainless steels in a range of applications including the Fabrication of pipe and plate.
The weld metal provides a high resistance to pitting and stress corrosion cracking especially in high chloride media. The weld metal nickel content over matches the parent material by 2-3% to provide an optimum balance of austenite and ferrite in the as welded condition.
Corrosion Resistance:- Corresponding to ER 2209 i.e. fairly good under severe conditions such as oxidising and cold dilute reducing acids.
TIG WIRE: ER316L/LS1 2.40 X 1000MM SUPERON 5KG TUBE
SKU:
SUP1000262
SUPERTIG 2209 is a W 22 9 3 NL/ ER 2209 type solid TIG welding rod depositing a low C 22Cr 8Ni 3Mo weld metal. Suitable for use mainly with Ar shielding gas. SUPERTIG 2209 is used for the welding of duplex stainless steels in a range of applications including the Fabrication of pipe and plate.
The weld metal provides a high resistance to pitting and stress corrosion cracking especially in high chloride media. The weld metal nickel content over matches the parent material by 2-3% to provide an optimum balance of austenite and ferrite in the as welded condition.
Corrosion Resistance:- Corresponding to ER 2209 i.e. fairly good under severe conditions such as oxidising and cold dilute reducing acids.
