- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
LIVE CENTRE: SKODA MT2 CNC
SKU:
LLC9106050
* This Skoda CNC live centre is suitable for running at high rpm
* It is recomended to lubricate the centre every 300 hours
* This is achieved through the screwhole on the body of the centre and taper end
* We recomend LV 2-3 lithium lubricating grease
* Careful maintenance of these centres will extend their working life
LIVE CENTRE: SKODA MT3 CNC
SKU:
LLC9106052
* This Skoda CNC live centre is suitable for running at high rpm
* It is recomended to lubricate the centre every 300 hours
* This is achieved through the screwhole on the body of the centre and taper end
* We recomend LV 2-3 lithium lubricating grease
* Careful maintenance of these centres will extend their working life
LIVE CENTRE: SKODA MT4 CNC
SKU:
LLC9106054
* This Skoda CNC live centre is suitable for running at high rpm
* It is recomended to lubricate the centre every 300 hours
* This is achieved through the screwhole on the body of the centre and taper end
* We recomend LV 2-3 lithium lubricating grease
* Careful maintenance of these centres will extend their working life
LIVE CENTRE: SKODA MT5 CNC
SKU:
LLC9106056
* This Skoda CNC live centre is suitable for running at high rpm
* It is recomended to lubricate the centre every 300 hours
* This is achieved through the screwhole on the body of the centre and taper end
* We recomend LV 2-3 lithium lubricating grease
* Careful maintenance of these centres will extend their working life
PARTING TOOL KIT: 12.0MM + NCIH 19-3 3.0MM
SKU:
LTA120140
PARTING TOOL KIT: 16.0MM + NCIH 26-3 3.0MM
SKU:
LTA120159
PARTING TOOL KIT: 16.0MM + NCIH 26-2 2.0MM
SKU:
LTA120160
PARTING TOOL KIT: 16.0MM + 2 BLADES x 26MM + TIPS SET
SKU:
LTA120161
PARTING TOOL KIT: 16.0MM + BLADE NCIH19-2 2.0MM
SKU:
LTA120162
PARTING TOOL KIT: 20.0MM + BLADES NCIH26-2 2.0 & 3.0MM
SKU:
LTA120164
PARTING TOOL KIT: 20.0MM + SK-28B BLADE 3.0MM
SKU:
LTA120165
PARTING TOOL KIT: 20.0MM + 2 BLADES 3 & 4MM
SKU:
LTA120167
PARTING TOOL KIT: 25.0MM + 3 BLADES 3.0, 4.0, 5.0MM
SKU:
LTA120169
PARTING TOOL KIT: 25.0MM + 2 X 150 X 32.0MM 3.0MM BLADES
SKU:
LTA120170
THREADING TOOL KIT: SER 1616H16 16.0MM
SKU:
LTA120240
THREADING TOOL HOLDER: SEL 1616H16 16.0MM L/HAND
SKU:
LTA120241
THREADING TOOL KIT: 20.0MM INT/EXT
SKU:
LTA120243
THREADING TOOL KIT: 25.0MM INT/EXT
SKU:
LTA120245
LATHE TOOL SET: 3PC 10.0MM SHANK BLACK
SKU:
LTA9294010
LATHE TOOL SET: 3PC 12.0MM SHANK BLACK
SKU:
LTA9294012
CHROME TOOL SET: 3PC 16.0MM SHANK
SKU:
LTA9294016
CHROME TOOL SET: 3PC 25.0MM SHANK
SKU:
LTA9294024
CHROME TOOL SET: 5PC 8.0MM SHANK
SKU:
LTA9294051
CHROME TOOL SET: 5PC 12.0MM SHANK
SKU:
LTA9294054
CHROME TOOL SET: 5PC 16.0MM SHANK
SKU:
LTA9294056
CHROME TOOL SET: 5PC 20.0MM SHANK
SKU:
LTA9294058
CHROME TOOL SET: 5PC 25.0MM SHANK
SKU:
LTA9294060
TURNING TOOL SET: 5PC 12.0MM SHANK HARLINGEN
SKU:
LTA9294118
* This Harlingen 5pc lathe tool turning set is a great starting set for lathe metal turning and is suitable for external and end turning
* Uses the same TCMC carbide inserts on all tools which is great as it saves having to provide a range of tips for each tool
* Comes with a quality aluminium case for safe storage
TURNING TOOL SET: 5PC 16.0MM SHANK HARLINGEN
SKU:
LTA9294120
* This Harlingen 5pc lathe tool turning set is a great starting set for lathe metal turning and is suitable for external and end turning
* Uses the same TCMC carbide inserts on all tools which is great as it saves having to provide a range of tips for each tool
* Comes with a quality aluminium case for safe storage
TURNING TOOL SET: 5PC 20.0MM SHANK HARLINGEN
SKU:
LTA9294124
* This Harlingen 5pc lathe tool turning set is a great starting set for lathe metal turning and is suitable for external and end turning
* Uses the same TCMC carbide inserts on all tools which is great as it saves having to provide a range of tips for each tool
* Comes with a quality aluminium case for safe storage
TURNING TOOL SET: 7PC 12.0MM SHANK HARLINGEN
SKU:
LTA9294130
* This Harlingen 7pc lathe tool turning set is a great starting set for lathe metal turning and is suitable for external and end turning
* Uses a range of carbide inserts gto suit all tools
* This turning tool set will suit all your turning requirements
* Comes with a quality aluminium case for safe storage
TURNING TOOL SET: 7PC 16.0MM SHANK HARLINGEN
SKU:
LTA9294132
* This Harlingen 7pc lathe tool turning set is a great starting set for lathe metal turning and is suitable for external and end turning
* Uses a range of carbide inserts gto suit all tools
* This turning tool set will suit all your turning requirements
* Comes with a quality aluminium case for safe storage
LATHE TOOLPOST: TP1 55 X 55MM
SKU:
LTE400120
LATHE TOOLPOST: TP2 65 X 65MM
SKU:
LTE400130
LATHE TOOLPOST: TP3 81 X 81MM
SKU:
LTE400140A
LATHE TOOLPOST: TP4 90 X 90MM
SKU:
LTE400150
LATHE TOOLPOST: TP8 140 X 140MM
SKU:
LTE400190
PARTING TOOLHOLDER: T-TYPE 1/2″ ETS W/BLADE
SKU:
LTG9312006
PARTING TOOLHOLDER: T-TYPE 5/8″ ETS W/BLADE
SKU:
LTG9312010
PARTING TOOLHOLDER: T-TYPE 3/4″ ETS W/BLADE
SKU:
LTG9312016
PARTING TOOL BLOCK SET: 25 X 25MM SHANK 3 BLADES
SKU:
LTG9312020
PARTING TOOL BLOCK SET: 20 X 20MM SHANK 2 BLADES
SKU:
LTG9312024
LATHE TOOL HOLDER: SDNCN 1010-E07
SKU:
LTH600900
S Type with Screw Lock Clamping System For ISO Type DC Inserts. Mulitpurpose profiling toolholder equipped with rhombic positive insert (angle 55 degree). The centre screw ensures good rigidity and chip flow. Applications: External turning and profiling toolholder for general applications, roughing, semi finishing and finishing.
LATHE TOOL HOLDER: SDNCN 1616-H11 16.0 X 16.0MM
SKU:
LTH600910
Characteristics: * Multipurpose profiling toolholder equipped with rhombic positive insert (angle 55 degrees) * The centre screw ensures good rigidity and chip flow * Applications: * External turning and profiling toolholder for general applications, roughing, semi-finishing and finishing * Negative insertss toolholders Ref. PDNN *
LATHE TOOL HOLDER: CTFPR 2020-K16 20.0 X 20.0MM
SKU:
LTH610100
Characteristics: * Toolholder for face turning applications equipped with triangular positive inserts and strong cutting edges * The top clamp ensures good rigidity and stability*
Applications: * Face turning toolholder for all kind of materials * The workpiece should be stable * For interrupted cut choose toolholder PTFN *
LATHE TOOL HOLDER: CTFPR 2525-M16 25.0 X 25.0MM
SKU:
LTH610104
Characteristics: * Toolholder for face turning applications equipped with triangular positive inserts and strong cutting edges * The top clamp ensures good rigidity and stability*
Applications: * Face turning toolholder for all kind of materials * The workpiece should be stable * For interrupted cut choose toolholder PTFN *
LATHE TOOL HOLDER: DCLNR 3232-P19 32.0 X 32.0MM
SKU:
LTH610107
Characteristics: * Toolholder for face turning applications equipped with triangular positive inserts and strong cutting edges * The top clamp ensures good rigidity and stability*
Applications: * Face turning toolholder for all kind of materials * The workpiece should be stable * For interrupted cut choose toolholder PTFN *
LATHE TOOL HOLDER: MCLNR 2020-K12N 20.0 X 20.0MM
SKU:
LTH610108
Characteristics: * Multipurpose toolholder equipped with rhombic negative double sided insert (angle 80 Degrees) with strong cutting edge * The centre pin and top clamp ensure good rigidity and stability in roughing applications *
Applications: * External turning toolholder for general applications, roughing, semi-roughing, and finishing * Specially recommended for cermet, ceramic and K10, P10 grade inserts *
* For low powered machines and small pieces choose toolholder Ref. SCLC *
LATHE TOOL HOLDER: MCLNR 2525 M12-N 25.0 X 25.0MM
SKU:
LTH610112
Characteristics: * Multipurpose toolholder equipped with rhombic negative double side insert (angle 80 Degrees) with strong cutting edge. The centre pin and top clamp ensure good rigidity and stability in roughing applications.*
Applications: * External turning toolholder for general applications, roughing, semi-finishing and finishing. Not suitable for cermet, ceramic and K10, P10 grade inserts.*
For low powered machines and small pieces choose toolholder Ref SCLC
LATHE TOOL HOLDER: MTENR 5032-S22 32.0 X 32.0MM
SKU:
LTH610113
Characteristics: * Profiling toolholder with triangular negative double side insert (angle 60 Degrees) with strong cutting edge * The clamp fixing ensures good rigidity and stability in roughing applications*
Applications: * Profiling toolholder for general applications, roughing semi-finishing and finishing *
LATHE TOOL HOLDER: MTENL 5032-S22 32.0 X 32.0MM
SKU:
LTH610114
Characteristics: * Profiling toolholder with triangular negative double side insert (angle 60 Degrees) with strong cutting edge * The clamp fixing ensures good rigidity and stability in roughing applications*
Applications: * Profiling toolholder for general applications, roughing semi-finishing and finishing *
LATHE TOOL HOLDER: MTENN 5032-S22 32.0 X 32.0MM
SKU:
LTH610115
Characteristics: * Profiling toolholder with triangular negative double side insert (angle 60 Degrees) with strong cutting edge * The clamp fixing ensures good rigidity and stability in roughing applications*
Applications: * Profiling toolholder for general applications, roughing semi-finishing and finishing *
LATHE TOOL HOLDER: MTENN 2020K16-N 20.0 X 20.0MM
SKU:
LTH610116
Characteristics: * Profiling toolholder with triangular negative double side insert (angle 60 Degrees) with strong cutting edge * The clamp fixing ensures good rigidity and stability in roughing applications*
Applications: * Profiling toolholder for general applications, roughing semi-finishing and finishing *
LATHE TOOL HOLDER: MTENN 2525M16-N 25.0 X 25.0MM
SKU:
LTH610120
Characteristics: * Profiling toolholder with triangular negative double side insert (angle 60 Degrees) with strong cutting edge * The clamp fixing ensures good rigidity and stability in roughing applications*
Applications: * Profiling toolholder for general applications, roughing semi-finishing and finishing *
LATHE TOOL HOLDER: MTJNR 2020M16-KN 20.0 X 20.0MM
SKU:
LTH610122
Characteristics: * Turning and profiling toolholder equipped with triangular negative double side insert with strong cutting edge * The centre pin and top clamp ensure good rigidity and stability in roughing applications *
Applications: * External turning and profiling toolholder for general applications, roughing, semi roughing, and finishing * Specially recommended for cermet, ceramic and K10, P10 grade inserts *
LATHE TOOL HOLDER: MTJNL 2020M16-KN 20.0 X 20.0MM
SKU:
LTH610123
Characteristics: * Turning and profiling toolholder equipped with triangular negative double side insert with strong cutting edge * The centre pin and top clamp ensure good rigidity and stability in roughing applications * Applications * External turning and profiling toolholder for general applications, roughing, semi roughing, and finishing * Specially recommended for cermet, ceramic and K10, P10 grade inserts *
LATHE TOOL HOLDER: MTJNL 2525M16-KN 25.0 X 25.0MM
SKU:
LTH610124
Characteristics: * Turning and profiling toolholder equipped with triangular negative double side insert with strong cutting edge * The centre pin and top clamp ensure good rigidity and stability in roughing applications *
Applications: * External turning and profiling toolholder for general applications, roughing, semi roughing, and finishing * Specially recommended for cermet, ceramic and K10, P10 grade inserts *
LATHE TOOL HOLDER: MTJNR 2525 M16-KN 25.0 X 25.0MM
SKU:
LTH610128
Characteristics: * Turning and profiling toolholder equipped with triangular negative double side insert with strong cutting edge * The centre pin and top clamp ensure good rigidity and stability in roughing applications * Applications * External turning and profiling toolholder for general applications, roughing, semi roughing, and finishing * Specially recommended for cermet, ceramic and K10, P10 grade inserts *
LATHE TOOL HOLDER: MWLNR 2020 K06 20/.0 X 20.0MM
SKU:
LTH610132
Characteristic: * Multi purpose holder with trigon neg. double sided insert with strong cutting edge. The centre pin and top clamp ensure good rigidity and stability in roughing applications. Suitable general applications roughing to finishing * Specially recommended for cermet, ceramic and K10, P10 grade inserts *
LATHE TOOL HOLDER: MWLNL 2525-M06 25.0 X 25.0MM
SKU:
LTH610136
LATHE TOOL HOLDER: MWLNR 1616-H06 16.0 X 16.0MM
SKU:
LTH610140
Characteristics: * Multipurpose toolholder equipped with trigon negative double side insert (angle 80 Degrees) with strong cutting edge * The centre pin and top clamp ensure good rigidity and stability in roughing applications *
Applications: * External turning toolholder for general applications, roughing, semi roughing, semi-finishing and finishing * Not suitable for cermet, ceramic and K10, P10 grade inserts *
LATHE TOOL HOLDER: MWLNR 2020-K08 20.0 X 20.0MM
SKU:
LTH610144
Characteristics: * Multipurpose toolholder equipped with trigon negative double side insert (angle 80 Degrees) with strong cutting edge * The centre pin and top clamp ensure good rigidity and stability in roughing applications *
Applications: * External turning toolholder for general applications, roughing, semi roughing, semi-finishing and finishing * Not suitable for cermet, ceramic and K10, P10 grade inserts ** This is a 95deg right hand lathe toolholder - takes WNMG0804 inserts *
LATHE TOOL HOLDER: MWLNR 2525M08 25.0 X 25.0MM CANELA
SKU:
LTH610148
Characteristics: * Multipurpose toolholder equipped with trigon negative double side insert (angle 80 Degrees) with strong cutting edge * The centre pin and top clamp ensure good rigidity and stability in roughing applications *
Applications: * External turning toolholder for general applications, roughing, semi roughing, semi-finishing and finishing * Not suitable for cermet, ceramic and K10, P10 grade inserts ** This is a 95deg right hand lathe toolholder - takes WNMG0804 inserts ** Right hand lathe tool holder - tip supplied *
LATHE TOOL HOLDER: MWLNR 252506 25.0 X 25.0MM
SKU:
LTH610149
Characteristics: * Multipurpose toolholder equipped with trigon negative double side insert (angle 80 Degrees) with strong cutting edge * The centre pin and top clamp ensure good rigidity and stability in roughing applications *
Applications: * External turning toolholder for general applications, roughing, semi roughing, semi-finishing and finishing * Not suitable for cermet, ceramic and K10, P10 grade inserts ** This is a 95deg right hand lathe toolholder - takes WNMG0804 inserts ** Right hand lathe tool holder - tip supplied *
LATHE TOOL HOLDER: PSSNR 2020K-M12 20.0 X 20.0MM
SKU:
LTH610152
Characteristics: * Profiling multipurpose turning toolholder equipped with round negative insert with strong cutting edge * The lever lock ensures good rigidity and chip flow in roughing applications *
Applications: * Profiling multipurpose turning toolholder for general applications, roughing, semi-finishing and finishing *
LATHE TOOL HOLDER: PRSNL 2020K-M12 20.0 X 20.0MM HARTINGEN
SKU:
LTH610153
Characteristics:
* Toolholder for external turning and chamfering applications equipped with square negative inserts and strong cutting edges
Applications:
* External turning and chamfering toolholder for general applications, roughing, semi-finishing and finishing
* for Low powered machines and small pieces choose toolholder
LATHE TOOL HOLDER: PSSNR 2525K-M12 25.0 X 25.0MM HARTINGEN
SKU:
LTH610154
Characteristics: * Toolholder for external turning and chamfering applications equipped with square negative inserts and strong cutting edges *
Applications: * External turning and chamfering toolholder for general applications, roughing, semi-finishing and finishing * for Low powered machines and small pieces choose toolholder Ref CSSP *
LATHE TOOL HOLDER: PSSNL 2525K-M12 25.0 X 25.0MM HARTINGEN
SKU:
LTH610154L
Characteristics: * Toolholder for external turning and chamfering applications equipped with square negative inserts and strong cutting edges *
Applications: * External turning and chamfering toolholder for general applications, roughing, semi-finishing and finishing * for Low powered machines and small pieces choose toolholder Ref CSSP *
LATHE TOOL HOLDER: SCLCL 1010-E06 10.0 X 10.0MM
SKU:
LTH610156
Characteristics: * Multipurpose toolholder equipped with rhombic positive insert (angle 80 degrees) * The centre screw ensures good rigidity and chip flow *
Applications: * External turning toolholder for general applications, roughing, semi-finishing and finishing * Negative inserts toolholders Ref MCLN-K or MCLN or PCLN *
LATHE TOOL HOLDER: SCLCL 1212 F09 12.0 X 12.0MM
SKU:
LTH610160
Characteristics: * Multipurpose toolholder equipped with rhombic positive insert (angle 80 degrees) * The centre screw ensures good rigidity and chip flow *
Applications: * External turning toolholder for general applications, roughing, semi-finishing and finishing * Negative inserts toolholders Ref MCLN-K or MCLN or PCLN *
LATHE TOOL HOLDER: SCLCL 1212-M06 12.0 X 12.0MM
SKU:
LTH610164
Characteristics: * Multipurpose toolholder equipped with rhombic positive insert (angle 80 degrees) * The centre screw ensures good rigidity and chip flow *
Applications: * External turning toolholder for general applications, roughing, semi-finishing and finishing * Negative inserts toolholders Ref MCLN-K or MCLN or PCLN *
LATHE TOOL HOLDER: SCLCL 1616-H09 16.0 X 16.0MM
SKU:
LTH610166
Characteristics: * Multipurpose toolholder equipped with rhombic positive insert (angle 80 degrees) * The centre screw ensures good rigidity and chip flow *
Applications: * External turning toolholder for general applications, roughing, semi-finishing and finishing * Negative inserts toolholders Ref MCLN-K or MCLN or PCLN *
LATHE TOOL HOLDER: SCLCR 1010-M06 10.0 X 10.0MM
SKU:
LTH610170
Characteristics: * Multipurpose toolholder equipped with rhombic positive insert (angle 80 degrees) * The centre screw ensures good rigidity and chip flow *
Applications: * External turning toolholder for general applications, roughing, semi-finishing and finishing * Negative inserts toolholders Ref MCLN-K or MCLN or PCLN *
LATHE TOOL HOLDER: SCLCR 1212-F09 12.0 X 12.0MM
SKU:
LTH610172
Characteristics: * Multipurpose toolholder equipped with rhombic positive insert (angle 80 degrees) * The centre screw ensures good rigidity and chip flow *
Applications: * External turning toolholder for general applications, roughing, semi-finishing and finishing * Negative inserts toolholders Ref MCLN-K or MCLN or PCLN *
LATHE TOOL HOLDER: SCLCR 1212-M06 12.0 X 12.0MM
SKU:
LTH610176
Characteristics: * Multipurpose toolholder equipped with rhombic positive insert (angle 80 degrees) * The centre screw ensures good rigidity and chip flow *
Applications: * External turning toolholder for general applications, roughing, semi-finishing and finishing * Negative inserts toolholders Ref MCLN-K or MCLN or PCLN *
LATHE TOOL HOLDER: SCLCR 1616-H09 16.0 X 16.0MM
SKU:
LTH610180
Characteristics: * Multipurpose toolholder equipped with rhombic positive insert (angle 80 degrees) * The centre screw ensures good rigidity and chip flow *
Applications: * External turning toolholder for general applications, roughing, semi-finishing and finishing * Negative inserts toolholders Ref MCLN-K or MCLN or PCLN * This is a right hand lathe toolholder and takes CCMT09T3 inserts *
LATHE TOOL HOLDER: SCLCR 2020-H09 20.0 X 20.0MM HARLINGEN
SKU:
LTH6101801
Characteristics:
* Multipurpose toolholder equipped with rhombic positive insert (angle 80 degrees)
* The centre screw ensures good rigidity and chip flow
Applications:
* External turning toolholder for general applications, roughing, semi-finishing and finishing
* Negative inserts toolholders Ref MCLN-K or MCLN or PCLN
* This is a right hand lathe toolholder and takes CCMT09T3 inserts
LATHE TOOL HOLDER: DSSNR 2525-M12 25.0 X 25.0MM
SKU:
LTH610181
Characteristics: * Toolholder for external turning and chamfering applications equipped with squarre negative inserts and strong cutting edges * The dimple lock ensures good rigidity and chip flow in roughing applications * Applications: * External turning and chamfering toolholder for general applications, roughing, semi-finishing and finishing *
* For low powered machines and small pieces choose toolholder Ref. CSSP or SSSC *