- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
FREE VICE: 125MM FV-550
SKU:
VE-257400
FREE VICE: 200MM FV-550
SKU:
VE-257401
SIDE CLAMPING VICE: CP13 25MM
SKU:
VE-257610
SIDE CLAMPING VICE: CP13 35MM
SKU:
VE-257612
SIDE CLAMPING VICE: CP13 40MM
SKU:
VE-257614
SIDE CLAMPING VICE: CP13 25MM
SKU:
VE-257616
SIDE CLAMPING VICE: CP13 35MM
SKU:
VE-257618
SIDE CLAMPING VICE: CP13 40MM
SKU:
VE-257620
SIDE CLAMPING VICE: CP12 25MM
SKU:
VE-257622
SIDE CLAMPING VICE: CP12 35MM
SKU:
VE-257624
SIDE CLAMPING VICE: CP12 40MM
SKU:
VE-257626
SIDE CLAMPING VICE: CP12 25MM
SKU:
VE-257628
SIDE CLAMPING VICE: CP12 35MM
SKU:
VE-257630
SIDE CLAMPING VICE: CP12 40MM
SKU:
VE-257632
HOLD DOWN CLAMP: CP20 125MM ( SOLD AS PAIR)
SKU:
VE-257640
HOLD DOWN CLAMP: CP20 150MM
SKU:
VE-257642
HOLD DOWN CLAMP: CP20 194MM
SKU:
VE-257644
SPEEDY LOCK: CP24 M8 (ECENTRIC)
SKU:
VE-257690
SPEEDY LOCK: CP24 M16 (ECENTRIC)
SKU:
VE-257696
MILLING VICE: 100MM WPV-100 SWIVEL BASE
SKU:
VM-240100
*The WPV-100 milling vice is an ideal vice for small machines such as the Milling and Drilling machines or small mills
* Swivel base for versitility
* Accurate and study
* Graduations on base for positive positioning
* Detachable handle for utmost unostuction while machining
Harlingen-H-41-089-003: High Precision Accuracy To 0.01 Mm
Angle-Lock Designed To Prevent Jaw Lift
Made Of High Grade Steel Alloy
Height Matched
Jaw Face: 150 x 50mm
Jaw Opening: 200mm
Overall Length: 420mm
Hardness: HRC 58-62
MILLING VICE: 150MM WPV-150 SWIVEL BASE
SKU:
VM-240150
MILLING VICE: 100MM MVA-100 SWIVEL BASE
SKU:
VM-240160
MILLING VICE: 150MM MVA-160 SWIVEL BASE
SKU:
VM-240165
MILLING VICE: 150MM MODULAR PULL DOWN JAWS HARLINGEN
SKU:
VM-249280
* High precision modular Milling Vice by Harlingen
* Accuracy to 0.005mm/100mm
* Manufactured from high alloy resitance steel
* All Harlingen vices and accessories are modular and interchangeable
* Perfect alignment is achieved to provide different workholding solutions
* Vices can be matched side to side with highest precision and minimal set up times
* Max jaw opening on this model is 300mm
Harlingen-H-41-089-003: High Precision Accuracy To 0.01 Mm
Angle-Lock Designed To Prevent Jaw Lift
Made Of High Grade Steel Alloy
Height Matched
Jaw Face: 150 x 50mm
Jaw Opening: 300mm
Overall Length: 420mm
Hardness: HRC 58-62
MILLING VICE: 125MM MODULAR PULL DOWN JAWS HARLINGEN
SKU:
VM-249284
* High precision modular Milling Vice by Harlingen
* Accuracy to 0.005mm/100mm
* Manufactured from high alloy resitance steel
* All Harlingen vices and accessories are modular and interchangeable
* Perfect alignment is achieved to provide different workholding solutions
* Vices can be matched side to side with highest precision and minimal set up times
* Max jaw opening 200mm
Harlingen-H-41-089-003: High Precision Accuracy To 0.01 Mm
Angle-Lock Designed To Prevent Jaw Lift
Made Of High Grade Steel Alloy
Height Matched
Jaw Face: 150 x 50mm
Jaw Opening: 200mm
Overall Length: 420mm
Hardness: HRC 58-62
MILLING VICE: 160MM ACC LOCK SWIVEL BASE
SKU:
VM-251404
* VM-160 Acclock Machine Vice
* The Acclock vice has a ductile steel body with hardened and ground movable steel jaw.
* All surfaces are precision ground and the bed is flame hardened
* Spherical segment allows for all directional alignment
* When clamping, a downward pressure of 1kg is exerted by the movable jaw for every 2kg of clamping pressure, preventing the work piece from tilting
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360
MILLING VICE: 100MM HYDRAULIC CHV-100V SAFEWAY
SKU:
VM-251440
MILLING VICE: 150MM HYDRAULIC HP60 TAIWAN
SKU:
VM-251450
* Auto-Well Hydra-Vises are ruggedly constructed to give industry a truly dependable vice suitable for milling, grinding, drilling, shaping, toolroom and production work.
* They are built to precision tolerances and accurate standards to ensure reliability and long service life.
* Hydra-Vise are designed for their superior holding strength
* Manufactured in Taiwan
MILLING VICE: 100MM QH100 SWIVEL BASE
SKU:
VM-251514
* QH-100 Machine Vice with swivel base
* This vice has a ductile steel body with hardened and ground movable steel jaw.
* All surfaces are precision ground and the bed is flame hardened
* Spherical segment allows for all directional alignment
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360deg
MILLING VICE: 150MM QH160 SWIVEL BASE
SKU:
VM-251516
* QH-160 Machine Vice with swivel base
* This vice has a ductile steel body with hardened and ground movable steel jaw.
* All surfaces are precision ground and the bed is flame hardened
* Spherical segment allows for all directional alignment
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360deg
MILLING VICE: 200MM QH200 SWIVEL BASE
SKU:
VM-251518
* QH-200 Machine Vice with swivel base
* This vice has a ductile steel body with hardened and ground movable steel jaw.
* All surfaces are precision ground and the bed is flame hardened
* Spherical segment allows for all directional alignment
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360deg
MILLING VICE: 250MM QB250 SWIVEL BASE
SKU:
VM-251520
* QH-100 Machine Vice with swivel base
* This vice has a ductile steel body with hardened and ground movable steel jaw
* All surfaces are precision ground and the bed is hardened
* Spherical segment allows for all directional alignment
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360deg
* This is a neavy duty vice designed for heavy milling jobs
MILLING VICE: 160MM CH ADJUSTABLE
SKU:
VM-257500
MILLING VICE: 200MM CH ADJUSTABLE
SKU:
VM-257510
MILLING VICE: 100MM LK-100 SWIVEL BASE CH
SKU:
VM-9963106
* LK-100 Machine Vice with swivel base
* This vice has a ductile steel body with hardened and ground movable steel jaw
* All surfaces are precision ground and the bed is hardened
* Spherical segment allows for all directional alignment
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360 deg
* Very popular vice for mill/drills and small milling machines
MILLING VICE: 150MM LK-150 SWIVEL BASE CH
SKU:
VM-9963108
* LK-150 Machine Vice with swivel base
* This vice has a ductile steel body with hardened and ground movable steel jaw.
* All surfaces are precision ground and the bed is hardened
* Spherical segment allows for all directional alignment
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360 deg
* Very popular vice for milling machines
MILLING VICE: 100MM J-400 WIDE 9″ OPENING SWIVEL BASE
SKU:
VM-9963110
* This vice has a ductile steel body with hardened and ground movable steel jaw.
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360 deg
* Very popular vice for milling machines
* A very versatile vice with wide jaw opening jaw to 225mm
* Manufactured in Taiwan
MILLING VICE: 150MM J-600 WIDE 11″ OPENING SWIVEL BASE
SKU:
VM-9963112
* J-600 Machine Vice
* This vice has a ductile steel body with hardened and ground movable steel jaw.
* All surfaces are precision ground and the bed is hardened
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360 deg
* Very popular vice for milling machines
* A very versatile vice with wide jaw opening jaw to 225mm
* Manufactured in Taiwan
MILLING VICE: 150MM VER-LOCK LV60 SWIVEL BASE TAIWAN
SKU:
VM-9963120
* LV-60 Ver-lock Machine Vice
* The Ver-lock vice has a ductile steel body with hardened and ground movable steel jaw.
* All surfaces are precision ground and the bed is flame hardened
* Spherical segment allows for all directional alignment
* When clamping, a downward pressure of 1kg is exerted by the movable jaw for every 2kg of clamping pressure, preventing the work piece from tilting
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360
* Manufactured in Taiwan
MILLING VICE: 125MM VER-LOCK LV50 SWIVEL BASE TAIWAN
SKU:
VM-9963122
* LV-50 Ver-lock Machine Vice
* The Ver-lock vice has a ductile steel body with hardened and ground movable steel jaw.
* All surfaces are precision ground and the bed is flame hardened
* Spherical segment allows for all directional alignment
* When clamping, a downward pressure of 1kg is exerted by the movable jaw for every 2kg of clamping pressure, preventing the work piece from tilting
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360
* Manufactured in Taiwan
MILLING VICE: 100MM VER-LOCK LV40 SWIVEL BASE TAIWAN
SKU:
VM-9963124
* LV-40 Ver-lock Machine Vice
* The Ver-lock vice has a ductile steel body with hardened and ground movable steel jaw.
* Spherical segment allows for all directional alignment
* When clamping, a downward pressure of 1kg is exerted by the movable jaw for every 2kg of clamping pressure, preventing the work piece from tilting
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360
* Manufactured in Taiwan
MILLING VICE: 100MM PRECISION IN-100 SWIVEL BASE
SKU:
VM-9963150
MILLING VICE: 100MM NICON N201S SWIVEL BASE
SKU:
VM-9963180
* N201S-100 Machine Vice
* The Nicon 201S vice has a ductile steel body with hardened and ground movable steel jaw
* All surfaces are precision ground and the bed is hardened
* Spherical segment allows for all directional alignment
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360deg
* This Nicon milling vice comes mounted on a swivel base for versatility while machining
* Low design with covered leadscrew
* Jaws are hardened and precision ground with maintained accuracy and repeatability
MILLING VICE: 150MM NICON N201S SWIVEL BASE
SKU:
VM-9963182
* N201S-150 Machine Vice
* The Nicon 201S vice has a ductile steel body with hardened and ground movable steel jaw.
* All surfaces are precision ground and the bed is hardened
* Spherical segment allows for all directional alignment
* Bearing thrust collar cuts friction and increases clamping pressure
* Swivel base is graduated to 360deg
* This Nicon milling vice comes mounted on a swivel base for versatility while machining * Low design with covered leadscrew
* Jaws are hardened and precision ground with maintained accuracy and repeatability
MILLING VICE: 100MM NICON SELF CENTRING SWIVEL BASE N-158
SKU:
VM-9963200
* N158-100 Machine Vice - This vice is selt centering
* The Nicon N158-100 vice has a ductile steel body with hardened and ground movable steel jaw.
* All surfaces are precision ground and the bed is hardened.
* Spherical segment allows for all directional alignment.
* Bearing thrust collar cuts friction and increases clamping pressure.
* This Nicon milling vice comes mounted on a swivel base for versatility while machining.
* Base is gradated to 360 deg.
* Low design with covered leadscrew.
* Jaws are hardened and precision ground with maintained accuracy and repeatability.
MILLING VICE: 100MM NICON LOCK DOWN F/BASE MMV100
SKU:
VM-9963210
* The Nicon N171 vices have a ductile steel body.
* Jaws are hardened and precision ground.
* Spherical segment allows for all directional alignment.
* Bearing thrust collar cuts friction and increases clamping pressure.
* Mounted on fixed base.
* Low profile with covered leadscrew.
* Accuracy in squarness is 0.02/100mm.
MILLING VICE: 160MM NICON LOCK DOWN F/BASE MMV150
SKU:
VM-9963220
* The Nicon N171 vices have a ductile steel body.
* Jaws are hardened and precision ground.
* Spherical segment allows for all directional alignment.
* Bearing thrust collar cuts friction and increases clamping pressure.
* Mounted on fixed base.
* Low profile with covered leadscrew.
* Accuracy in squarness is 0.02/100mm.
MILLING VICE: 200MM NICON LOCK DOWN F/BASE MMV200
SKU:
VM-9963230
* The Nicon N171 vices have a ductile steel body.
* Jaws are hardened and precision ground.
* Spherical segment allows for all directional alignment.
* Bearing thrust collar cuts friction and increases clamping pressure.
* Mounted on fixed base.
* Low profile with covered leadscrew.
* Accuracy in squarness is 0.02/100mm.
MILLING VICE: 100MM NICON LOCK DOWN S/BASE N-171
SKU:
VM-9963250
* The Nicon N171 vices have a ductile steel body.
* Jaws are hardened and precision ground.
* Spherical segment allows for all directional alignment.
* Bearing thrust collar cuts friction and increases clamping pressure.
* Mounted on swivel base.
* Low profile with covered leadscrew.
* Accuracy in squarness is 0.02/100mm.
MILLING VICE: 150MM NICON LOCK DOWN S/BASE N-171
SKU:
VM-9963252
* The Nicon N171 vices have a ductile steel body.
* Jaws are hardened and precision ground.
* Spherical segment allows for all directional alignment.
* Bearing thrust collar cuts friction and increases clamping pressure.
* Mounted on swivel base.
* Low profile with covered leadscrew.
* Accuracy in squarness is 0.02/100mm.
MILLING VICE: 200MM NICON LOCK DOWN S/BASE N-171
SKU:
VM-9963254
* The Nicon N171 vices have a ductile steel body.
* Jaws are hardened and precision ground.
* Spherical segment allows for all directional alignment.
* Bearing thrust collar cuts friction and increases clamping pressure.
* Mounted on swivel base.
* Low profile with covered leadscrew.
* Accuracy in squarness is 0.02/100mm.
MILLING VICE: 150MM NICON PRECISION S/BASE N-151S
SKU:
VM-9963264
* The Nicon N151S-150 vice has a ductile steel body with hardened and ground movable steel jaw
* All surfaces are precision ground and the bed is hardened
* Spherical segment allows for all directional alignment
* Bearing thrust collar cuts friction and increases clamping pressure
* Mounted of fixed base
* Swivel base is graduated to 360 deg
* Jaws are hardened and precision ground with maintained accuracy and repeatability * Precision Lock Down milling vice
* Accuracy in squarness0.02/100mmy while machining
* Vice can be quickly aligned through longitudinal provided in the base of the body
MILLING VICE: 100MM NICON PRECISION S/BASE N-151S
SKU:
VM-9963266
* The Nicon N151S-100 vice has a ductile steel body with hardened and ground movable steel jaw
* All surfaces are precision ground and the bed is hardened
* Spherical segment allows for all directional alignment
* Bearing thrust collar cuts friction and increases clamping pressure
* Mounted of fixed base
* Swivel base is graduated to 360 deg
* Jaws are hardened and precision ground with maintained accuracy and repeatability * Precision Lock Down milling vice
* Accuracy in squarness0.02/100mmy while machining
* Vice can be quickly aligned through longitudinal provided in the base of the body
MILLING VICE: 150MM NICON HYDRAULIC FIXED BASE
SKU:
VM-9963282
* Features of the N-181 Milling Vice.
* Ruggedly constructed for milling, drilling, shaping, grinding and many other machine shop applications.
* Body made of high-quality ductile cast iron to resist deflection or bending.
* Hardened and ground sideways.
* Concealed spindle for protection against chip and dirt.
* Hydraulic booster system for maximum clamping pressure with minimum force.
* Hydra-booster system is guaranteed for 1 year limited.
* Also available in swivel base.
* Accuracy in squareness is 0.02/100mm.
* Quick of clamping, locking and ease of operation.
* The hydraulic oil number is #68
* Maximum clamping Pressure 4500Kg.
PIPE VICE; STATE DR-V1 1/8″ – 2-1/2″ HINGED TYPE
SKU:
VP-100504
* Heat treated V-Teeth jaws for maximum holding power.
* The handle and mainscrew is manufactured from high quality steel for long toollife.
* To grip a pipe the frame is hinged back and the pipe located on the lower jaw
* When the frame is hinged down a locking hook automatically engages onto the side of the base holding the vice firmly shut
* Ideal for fast repetitive work
PIPE VICE; STATE DR-V2 1/8″ – 3-1/2″ HINGED TYPE
SKU:
VP-100506
* The frame and the base are hinged together for this pipe vices. Heat treated V-Teeth jaws for maximum holding power
* The handle and mainscrew is manufactured from high quality steel for long toollife
* To grip a pipe the frame is hinged back and the pipe located on the lower jaw
* When the frame is hinged down a locking hook automatically engages onto the side of the base holding the vice firmly shut. Ideal for fast repetitive work
PIPE VICE; STATE DR-V3 1/8″ – 4″ HINGED TYPE
SKU:
VP-100508
* The frame and the base are hinged together for this pipe vices. Heat treated V-Teeth jaws for maximum holding power
* The handle and mainscrew is manufactured from high quality steel for long toollife
* To grip a pipe the frame is hinged back and the pipe located on the lower jaw
* When the frame is hinged down a locking hook automatically engages onto the side of the base holding the vice firmly shut
* Ideal for fast repetitive work
PIPE VICE WITH STAND: 3 LEG SUIT VICES 1/8″ – 2-1/2″ CAPACITY
SKU:
VP-100512
* This 3 leg pipe vice stand is portable and is ideal for site work. * The frame and the base are hinged together for this pipe vices. Heat treated V-Teeth jaws for maximum holding power * The handle and mainscrew is manufactured from high quality steel for long toollife * To grip a pipe the frame is hinged back and the pipe located on the lower jaw * When the frame is hinged down a locking hook automatically engages onto the side of the base holding the vice firmly shut. Ideal for fast repetitive work *
PIPE VICE C/W STAND: 3 LEGS: RANGE 1/8″-6″ CHAIN TYPE (2 BOXES)
SKU:
VP-272200
* The frame and the base are hinged together for this pipe vices
* The replaceable steel jaws are accurately machined hardened and tempered
* The handle and mainscrew are also steel while the frames and bases are strong aluminum castings
* To grip a pipe the chain is wraped over the pipe and tighened with the crank handle
* When the frame is hinged down it becomes a vert stable platform to work from
* Moulded into the cast table are formers to bend light tubing
* Very well finished and versitile unit
* Ideal for fast repetitive work.
PIPE VICE: NICON 10 – 115MM CAP 4″ CHAIN TYPE
SKU:
VP-272300
* If the main feature of the hinged vice is speed of operation the feature which distinguishes the chain vice is a very powerful grip
* The pipe rests on a 'V' formed by two sets of drop forged heat treated steel jaws
* The high tensile steel chain is then looped over the pipe locked into a slot between the jaws and tensioned by a handle and screw; a strong rigid three-point location which renders the pipe immovable
PIPE VICE: NICON 10 – 153MM CAP 6″ CHAIN TYPE
SKU:
VP-272305
* If the main feature of the hinged vice is speed of operation
* The feature which distinguishes the chain vice is a very powerful grip
* The pipe rests on a 'V' formed by two sets of drop forged heat treated steel jaws
* The high tensile steel chain is then looped over the pipe locked into a slot between the jaws and tensioned by a handle and screw; a strong rigid three-point location which renders the pipe immovable
PIPE VICE: NICON 15 – 210MM CAP 8″ CHAIN TYPE
SKU:
VP-272310
* If the main feature of the hinged vice is speed of operation
* the feature which distinguishes the chain vice is a very powerful grip
* The pipe rests on a 'V' formed by two sets of drop forged heat treated steel jaws
* The high tensile steel chain is then looped over the pipe locked into a slot between the jaws and tensioned by a handle and screw; a strong rigid three-point location which renders the pipe immovable
VICE SOFT JAWS: MAGNETIC 3″
SKU:
VS-245500
VICE SOFT JAWS: MAGNETIC 4″
SKU:
VS-245504
VICE SOFT JAWS: MAGNETIC 5″
SKU:
VS-245508
VICE SOFT JAWS: MAGNETIC 6″
SKU:
VS-245512
VICE SOFT JAWS: DAWN PLASTIC 150/PR
SKU:
VS-245626
VICE SOFT JAWS: DAWN ALUM 150/PR
SKU:
VS-245628
TOOLMAKERS VICE: 25 25 X 25MM QKG-25
SKU:
VT-9964010
TOOLMAKERS VICE: 50 X 65MM QGG-50
SKU:
VT-9964020
TOOLMAKERS VICE: 150 X 65MM QGG-150
SKU:
VT-9964030
TOOLMAKERS VICE: 100 X 73MM VP-30
SKU:
VT-9964040
TOOLMAKERS VICE: 125MM X 88MM QGG-88
SKU:
VT-9964060
WOOD VICE: 9″ NICON 52ED (225MM)
SKU:
VW-271009
* Nicon Woodworking Vices display all the attributes of attention to detail and sound engineering found in our metalworking vices
* Bodies and front plates are cast form grey iron in our own foundary and CNC machined for consistent repetitive accuracy
* When fully closed the jaws meet only at the top to provide an even clamping on the whole depth of the work piece as pressure is applied
* Location holes are provided so you can fit your own choice of wooden cheeks to protect the work
* Specially designed safety steel handle. Quick release action
WOOD VICE: 7″ NICON 52ED QUICK RELEASE
SKU:
VW-271010
* Nicon Woodworking Vices display all the attributes of attention to detail and sound engineering found in our metalworking vices
* Bodies and front plates are cast form grey iron in our own foundary and CNC machined for consistent repetitive accuracy
* When fully closed the jaws meet only at the top to provide an even clamping on the whole depth of the work piece as pressure is applied
* Location holes are provided so you can fit your own choice of wooden cheeks to protect the work
* Specially designed safety steel handle
traditional pattern woodworking vise equipped with a quick release mechanism.
A simple press of the trigger initiates the quick release action, allowing the front jaw to slide freely. This allows you to interchange small and large workpieces quickly and smoothly. Then, releasing the trigger returns the mechanism to normal for fine screw adjustments
These vises are equipped with an adjustable front dog which, when used in conjunction with a bench stop, allows you to securely hold workpieces that are too large to fit between the jaws. This capability effectively gives you a normal vise and a tail vise in one tool.
Vise jaws are equipped with a "toe-in" feature and when fully closed meet only at the top, providing even clamping.