- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
GORILLA GRIP: 9PC SET BALL END IMPERIAL FOLDING
SKU:
AKS121252
GORILLA GRIP: 7PC SET BALL END METRIC FOLDING
SKU:
AKS121260
AMPRO: FOLDING HEX KEY SET 7PC 1.5-6.0MM
SKU:
AKS121265
AMPRO: FOLDING HEX KEY SET 7PC 2.5-10.0MM
SKU:
AKS121266
AMPRO: FOLDING HEX KEY SET 7PC 1/16″-7/16″
SKU:
AKS121267
AMPRO: FOLDING HEX KEY SET 7PC 3/32″-3/8″
SKU:
AKS121268
BALL HEX KEY: 9PC METRIC SET MAXPOWER COLOR CODED
SKU:
AKS121300
BALL HEX KEY: 9PC METRIC SET MAXPOWER LONG
SKU:
AKS121304
BALL HEX KEY: 9PC SAE SET MAXPOWER LONG
SKU:
AKS121320
HEX KEY: T HEAD 10PC SET IMPERIAL
SKU:
AKS121600
HEX KEY: T HEAD 10PC SET MAXPOWER METRIC
SKU:
AKS121610
BALL HEX KEY: EKLIND 1.27MM
SKU:
AKS121714
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 1.5MM
SKU:
AKS121716
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 2.0MM
SKU:
AKS121718
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 2.5MM
SKU:
AKS121720
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 3.0MM
SKU:
AKS121722
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 3.5MM
SKU:
AKS121724
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: EKLIND 4.0MM CARDED
SKU:
AKS121726
*Eklind hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw
While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools
BALL HEX KEY: BONDHUS BL 4.5MM
SKU:
AKS121728
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 5.0MM
SKU:
AKS121730
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 5.5MM
SKU:
AKS121732
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 6.0MM
SKU:
AKS121734
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 7.0MM
SKU:
AKS121736
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 8.0MM
SKU:
AKS121738
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 9.0MM
SKU:
AKS121740
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: EKLIND 10.0MM CARDED
SKU:
AKS121741
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 11.0MM
SKU:
AKS121742
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 12.0MM
SKU:
AKS121744
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 14.0MM
SKU:
AKS121746
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 17.0MM
SKU:
AKS121748
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 19.0MM
SKU:
AKS121750
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 5/64″
SKU:
AKS121768
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 1/8″
SKU:
AKS121774
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: EKLIND 5/32″ O/A100MM CARDED
SKU:
AKS121778
* Eklind hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools
BALL HEX KEY: ELKIND L 3/16″ CARDED
SKU:
AKS121789
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS L 3/4″
SKU:
AKS121796
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
FLAT END HEX KEY: EKLIND 9PC MET 1.5-10MM
SKU:
AKS121962
HEX KEY: TONA 1.5MM
SKU:
AKS122010
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 2.5MM
SKU:
AKS122018
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 3.0MM
SKU:
AKS122022
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 3.5MM
SKU:
AKS122024
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 4.0MM
SKU:
AKS122028
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 5.0MM
SKU:
AKS122030
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 6.0MM
SKU:
AKS122034
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 7.0MM
SKU:
AKS122036
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 8.0MM
SKU:
AKS122038
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 10.0MM
SKU:
AKS122042
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: KING TONY 12.0MM LONG
SKU:
AKS122046
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 17.0MM
SKU:
AKS122054
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 19.0MM
SKU:
AKS122058
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 27.0MM
SKU:
AKS122066
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 30.0MM
SKU:
AKS122072
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
HEX KEY: TONA 32.0MM
SKU:
AKS122074
* A hex key, Allen key or Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
* The Allen name is a registered trademark, originated by the Allen Manufacturing Company of Hartford, Connecticut circa 1910, and currently owned by Apex Tool Group, LLC
* Its genericised use is discouraged by this company. The standard generic name used in catalogues and published books and journals is " hex key"
* The contact surfaces of the screw or bolt are protected from external damage and the Torque is constrained by the length and thickness of the key *
EKLIND: 1.5MM BALL HEX
SKU:
AKS122300
* Eklink hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
EKLIND: 2.0MM BALL HEX
SKU:
AKS122310
* Eklink hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
ELKIND: 3.0MM BALL HEX
SKU:
AKS122320
* Eklink hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
ELKIND: 4.0MM BALL HEX
SKU:
AKS122330
* Eklink hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
ELKIND: 5.0MM BALL HEX
SKU:
AKS122350
* Eklink hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
EKLIND: 6.0MM BALL HEX
SKU:
AKS122360
* Eklink hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
EKLIND: 8.0MM BALL HEX
SKU:
AKS122380
* Eklink hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *