- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
BALL HEX KEY: BONDHUS BL 5/64"
Excl. GST: $3.01
Incl. GST: $3.46
Incl. GST: $3.46
BALL HEX KEY: EKLIND 5/32" O/A100MM CARDED
Excl. GST: $4.62
Incl. GST: $5.31
Incl. GST: $5.31
BALL HEX KEY: BONDHUS BL 1/8″
Excl. GST: $3.19
Incl. GST: $3.67
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
| Weight | 0.01 kg |
|---|---|
| Dimensions | 0.1 × 0.03 × 0.03 cm |
In stock
Related products
BALL HEX KEY: BONDHUS BL 3.0MM
SKU:
AKS121722
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 3.5MM
SKU:
AKS121724
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: EKLIND 4.0MM CARDED
SKU:
AKS121726
*Eklind hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw
While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools
BALL HEX KEY: EKLIND 10.0MM CARDED
SKU:
AKS121741
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 14.0MM
SKU:
AKS121746
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
BALL HEX KEY: BONDHUS BL 19.0MM
SKU:
AKS121750
* Bondus hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
EKLIND: 1.5MM BALL HEX
SKU:
AKS122300
* Eklink hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *
ELKIND: 3.0MM BALL HEX
SKU:
AKS122320
* Eklink hex keys have a ball on one end, which allows the tool to be used at an angle off-axis to the screw.
* This type of hex key was invented in 1964 by the Bondhus Corporation and is now manufactured by several other companies.
* While providing access to otherwise inaccessible fasteners, thinning of the tool shaft to create the ball shape renders it weaker than the straight-shaft version, limiting the torque that can be applied.
* The tool also makes point contact with the fastener as opposed to the line contact seen in the straight style tools *