- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
HAND REAMER: HSS 29.0MM (SOMTA)
SKU:
REM4327258
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 30.0MM (SOMTA) H7
SKU:
REM4327260
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 31.0MM (SOMTA)
SKU:
REM4327262
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 32.0MM (SOMTA)
SKU:
REM4327264
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 33.0MM (SOMTA)
SKU:
REM4327266
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 34.0MM (SOMTA)
SKU:
REM4327268
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 35.0MM (SOMTA)
SKU:
REM4327270
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 36.0MM (SOMTA)
SKU:
REM4327272
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 37.0MM (SOMTA)
SKU:
REM4327274
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 38.0MM (SOMTA)
SKU:
REM4327276
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 1/8″ (SOMTA)
SKU:
REM4327301
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 5/32″
SKU:
REM4327303
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 3/16″ X 44MM (SOMTA)
SKU:
REM4327305
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 7/32″
SKU:
REM4327307
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 1/4″ X 50MM (SOMTA)
SKU:
REM4327309
* Another quality tool from Somta SA
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 9/32″
SKU:
REM4327311
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 5/16″ X 58MM
SKU:
REM4327313
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 11/32″
SKU:
REM4327315
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 3/8″
SKU:
REM4327317
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 13/32″
SKU:
REM4327319
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 7/16″
SKU:
REM4327321
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 15/32″
SKU:
REM4327323
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 1/2″ X 76MM (SOMTA)
SKU:
REM4327325
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 9/16″
SKU:
REM4327327
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 5/8″ (SOMTA)
SKU:
REM4327329
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 11/16″
SKU:
REM4327331
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 3/4″ (SOMTA)
SKU:
REM4327333
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 13/16″
SKU:
REM4327335
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 7/8″ (SOMTA)
SKU:
REM4327337
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 15/16″
SKU:
REM4327339
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 1″ (SOMTA)
SKU:
REM4327341
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 1-1/8″ (SOMTA)
SKU:
REM4327343
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 1-1/4″ (SOMTA)
SKU:
REM4327345
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 1-3/8″ (SOMTA)
SKU:
REM4327347
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
HAND REAMER: HSS 1-1/2″ (SOMTA)
SKU:
REM4327350
* This HSS-M2 spiral flute hand reamer is manufactured from quality HSS for durability and long service life.
* Hand reamers have a longer lead in taper at the front than a machine reamer.
* This is to compensate for the difficulty of starting a hole by hand power alone.
* It also allows the reamer to start straight, and reduces the risk of breakage.
TAPER PIN REAMER: 2.0MM RANGE 1.9MM – 2.26MM
SKU:
REM4388190
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 2.5MM RANGE 2.40MM-3.36MM STRAIGHT FLUTE
SKU:
REM4388195
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 3.0MM
SKU:
REM4388200
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 4.0MM (SOMTA) STR/FLUTE
SKU:
REM4388201
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 5.0MM (SOMTA) STR/FLUTE
SKU:
REM4388202
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 6.0MM (SOMTA) STR/FLUTE
SKU:
REM4388203
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 8.0MM (SOMTA) STR/FLUTE
SKU:
REM4388204
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 10.0MM (SOMTA) STR/FLUTE
SKU:
REM4388205
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 12.0MM (INDEX)
SKU:
REM4388206
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 12.0MM (SOMTA) STR/FLUTE
SKU:
REM4388206S
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 16.0MM (SOMTA) STR/FLUTE
SKU:
REM4388207
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 20.0MM (SOMTA) STR/FLUTE
SKU:
REM4388208
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 25.0MM (SOMTA) STR/FLUTE
SKU:
REM4388209
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 11/64″ STRAIGHT FLUTE
SKU:
REM4389106
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 3/16″ NO.2 STRAIGHT FLUTE
SKU:
REM4389107
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 7/32″ NO.3 STRAIGHT FLUTE (SOMTA)
SKU:
REM4389108
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 1/4″ NO.4 STRAIGHT FLUTE (SOMTA)
SKU:
REM4389109
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 9/32″ NO.5 XSTRAIGHT FLUTE (SOMTA)
SKU:
REM4389110
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 5/16″ STRAIGHT FLUTE (SOMTA)
SKU:
REM4389111
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 11/32″ NO.6 STRAIGHT FLUTE (SOMTA)
SKU:
REM4389112
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 3/8″ STRAIGHT FLUTE (SOMTA)
SKU:
REM4389113
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 13/32″ NO.7 STRAIGHT FLUTE
SKU:
REM4389114
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 7/16″ STRAIGHT SHANK (SOMTA)
SKU:
REM4389115
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 1/2″ NO.8 STRAIGHT SHANK
SKU:
REM4389116
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 9/16″ NO.9 STRAIGHT FLUTE (SOMTA)
SKU:
REM4389117
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 5/8″ STRAIGHT FLUTE
SKU:
REM4389118
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 3/4″ NO.10 STRAIGHT FLUTE
SKU:
REM4389119
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 7/8″ STRAIGHT FLUTE (SOMTA)
SKU:
REM4389120
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 1/8″- 1/2″ T-HANDLE
SKU:
REM500108
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 1/8 – 5/8″ T-HANDLE
SKU:
REM500110
* A precision tapered reamer is used to make a tapered hole to later receive a tapered
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 4.0 – 22.0MM T-HANDLE HOZAN JAPAN
SKU:
REM500114
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
* HOZAN products are made in Japan.
MORSE TAPER REAMER: MT1 STRAIGHT FLUTE
SKU:
REM500150
MORSE TAPER REAMER: MT2 STRAIGHT FLUTE
SKU:
REM500152
MORSE TAPER REAMER: MT3 STRAIGHT FLUTE
SKU:
REM500154
MORSE TAPER REAMER: MT4 STRAIGHT FLUTE
SKU:
REM500156
MORSE TAPER REAMER: MT5 STRAIGHT FLUTE
SKU:
REM500158
VALVE SEAT REAMER: 13PC SET 30-60MM 30 DEGREE
SKU:
REM500400
* This valve seat reamer is manufactured from quality HSS-M2 for durability and long service life
* Comes with 90 deg and 120 deg cutters with sizes from 30mm diameter to 60mm diameter
* Pilot from 6.0mm to 12.0mm
* Paking is in metal box with EVA packing for ulimate tool safety and storage
* A must for automotive shops
VALVE SEAT REAMER: 13PC SET 30-60MM 45 DEGRRE
SKU:
REM500405
* This valve seat reamer is manufactured from quality HSS-M2 for durability and long service life * Comes with 90 deg and 120 deg cutters with sizes from 30mm diameter to 60mm diameter * Pilot from 6.0mm to 12.0mm * Paking is in metal box with EVA packing for ulimate tool safety and storage * A must for automotive shops *
TAP WRENCH: M1.0 – 8.0MM BAR TYPE STEEL JAWS
SKU:
RWH3500150
TAP WRENCH: M1.0 – M8.0MM BAR TYPE STEEL JAWS
SKU:
RWH3500152
TAP WRENCH: M3.0 – 10.0MM BAR TYPE STEEL JAWS
SKU:
RWH3500154
TAP WRENCH: M3.0 – 12.0MM BAR TYPE STEEL JAWS
SKU:
RWH3500156
TAP WRENCH: M5.0 – 20.0MM BAR TYPE STEEL JAWS
SKU:
RWH3500158
TAP WRENCH: M9.0 – 27.0MM BAR TYPE STEEL JAWS
SKU:
RWH3500160
TAP WRENCH: M13.0 – 33.0MM BAR TYPE STEEL JAWS
SKU:
RWH3500162