- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
ADJUSTABLE REAMER: H10 27/32 - 15/16" (21.4-23.8MM) ASSORT
Excl. GST: $143.00
Incl. GST: $164.45
Incl. GST: $164.45
TAPER PIN REAMER: 6.0MM (SOMTA) STR/FLUTE
Excl. GST: $75.28
Incl. GST: $86.57
Incl. GST: $86.57
TAPER PIN REAMER: 5.0MM (SOMTA) STR/FLUTE
Excl. GST: $59.04
Incl. GST: $67.90
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
| Weight | 0.025 kg |
|---|---|
| Dimensions | 0.1 × 0.03 × 0.03 cm |
In stock
Related products
TAPER PIN REAMER: 8.0MM (SOMTA) STR/FLUTE
SKU:
REM4388204
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 10.0MM (SOMTA) STR/FLUTE
SKU:
REM4388205
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 5/16″ STRAIGHT FLUTE (SOMTA)
SKU:
REM4389111
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 7/16″ STRAIGHT SHANK (SOMTA)
SKU:
REM4389115
* Another quality tool from Somta SA
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 1/2″ NO.8 STRAIGHT SHANK
SKU:
REM4389116
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 5/8″ STRAIGHT FLUTE
SKU:
REM4389118
* Manufactured from quality HSS-M2 for durability and long service life.
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
TAPER PIN REAMER: 4.0 – 22.0MM T-HANDLE HOZAN JAPAN
SKU:
REM500114
* A precision tapered reamer is used to make a tapered hole to later receive a tapered pin.
* A taper pin is a self tightening device due to the shallow angle of the taper.
* They may be driven into the tapered hole such that removal can only be done with a hammer and punch.
* They are sized by a number sequence (for example, a No.4 reamer would use No.4 taper pins).
* HOZAN products are made in Japan.
MORSE TAPER REAMER: MT1 STRAIGHT FLUTE
SKU:
REM500150