- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
HYDRAULIC TELESCOPIC CYLINDER: 30 TON MAX LIFT 566MM
Excl. GST: $925.00
Incl. GST: $1,063.75
Incl. GST: $1,063.75
HYDRAULIC CYLINDER: 10T STROKE 10MM
Excl. GST: $130.00
Incl. GST: $149.50
Incl. GST: $149.50
TOGGLE CLAMP: GH-301-A HORZ PUSH TYPE
Excl. GST: $18.00
Incl. GST: $20.70
* The GH-301A clamp is suitable for light duty operations
* Each clamp is supplied with pressed steel base
* Close tolerances between the base and plunger allow these clamps to be used for pin locating gauges as well as clamping devices
* Plunger locks in extended or retracted position
* These clamps are supplied with adjustable end screw for fine adjustment
* The GH-301A clamp is supplied with red vinyl hand grip
* Holding capacity is 45kg
* Stroke is 18.0mm with handle locking in horizontal position
* This is a small clamp o/a length is 65.0mm with three hole mounting base
| Weight | 0.48 kg |
|---|---|
| Dimensions | 0.1 × 0.04 × 0.04 cm |
In stock
Description
| DESCRIPTION | Toggle Clamp |
|---|---|
| MODEL | GH-301-A |
| TYPE | Push/Pull |
| LENGTH OF STROKE | 18.0mm |
| LENGTH O/A | 65.0mm |
| BASE MOUNTING | 3 Screw holes |
| CLAMPING FORCE | 45Kg |
| WEIGHT NETT/GROSS | 0.046/0.048kg |
| VOLUME | 0.0002cm |
| BASE MEASUREMENT | L33.0mm x W27.0mm |
| BASE HOLE MEASUREMENTS | L16.0mm Centres W17.0mm Centres |
| BASE TO RAM | 11.0mm |
Shipping & Delivery
Related products
TOGGLE CLAMP: GH-12130 VERT
SKU:
TC-200058
TOGGLE CLAMP: GH-302F HORZ PUSH TYPE
SKU:
TC-200580
* The GH-302F clamp is suitable for light medium duty operations
* Each clamp is supplied with a pressed steel base
* Close tolerances between the base and plunger allow these clamps to be used for pin locating gauges as well as clamping devices
* These clamps are supplied with adjustable end screw for fine adjustment
* The GH-302F clamp is supplied with red vinyl hand grip
* Holding capacity is 136kg
* Stroke is 25.0mm with handle locking in a 45deg position
TOGGLE CLAMP: GH-305-E HORZ PUSH TYPE
SKU:
TC-200680
** The GH-305E clamp is suitable for light medium or heavy duty operations
* Each clamp is supplied with a ductile iron base, precision machined for flatness
* Close tolerances between the base and plunger allow these clamps to be used for pin locating gauges as well as clamping devices
* Plunger locks in extended or retracted position
* These clamps are supplied with adjustable end screw for fine adjustment
* The GH-305E clamp is supplied with red vinyl hand grip
* Holding capacity is 386kg
* Stroke is 36.0mm with handle locking in verticle position
TOGGLE CLAMP: GH-451 LATCH STAINLESS STEEL
SKU:
TC-200981
SPINDLE: M16 X L110MM
SKU:
TC-201060
SPINDLE: M10 X L90.0MM
SKU:
TC-201100
SPINDLE: M8 X L62.0MM
SKU:
TC-201120
TOGGLE CLAMP: KL-12130 VERT
SKU:
TC-202100