- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
TOGGLE CLAMP: GH-200-WLH HORZ
Excl. GST: $18.00
Incl. GST: $20.70
Incl. GST: $20.70
ASADA: REAR SCROLL JAWS 3SG
Excl. GST: $134.42
Incl. GST: $154.58
Incl. GST: $154.58
TOGGLE CLAMP: GH-220-WLH HORZ
Excl. GST: $28.00
Incl. GST: $32.20
* This clamp is supplied with spindle assembly * All models supplied with red plastic hand grip * holding capacity 400kg *
| Weight | 0.776 kg |
|---|---|
| Dimensions | 0.19 × 0.06 × 0.06 cm |
In stock
Description
| DESCRIPTION | Toggle Clamp |
|---|---|
| MODEL | GH-220-WLH |
| TYPE | Horizontal Handle When Lock |
| LENGTH ARM CLAMP | 110mm |
| O.A.L LENGTH | 290mm |
| HEIGHT BASE TO ARM | 72mm |
| CLAMPING FORCE | 400Kg |
| WEIGHT NETT/GROSS | 0.774/0.776kg |
| VOLUME | 0.0007cm |
| BASE MEASUREMENT | L70.0mm x W50.0mm |
| BASE HOLE MEASUREMENTS | L42.0mm Centres W30.0mm Centres |
| BASE TO ARM | 77.0mm |
Shipping & Delivery
Related products
TOGGLE CLAMP: GH-12130 VERT
SKU:
TC-200058
TOGGLE CLAMP: GH-201-AL HORZ
SKU:
TC-200360
TOGGLE CLAMP: GH-201-C HORZ
SKU:
TC-200390
TOGGLE CLAMP: GH-302F HORZ PUSH TYPE
SKU:
TC-200580
* The GH-302F clamp is suitable for light medium duty operations
* Each clamp is supplied with a pressed steel base
* Close tolerances between the base and plunger allow these clamps to be used for pin locating gauges as well as clamping devices
* These clamps are supplied with adjustable end screw for fine adjustment
* The GH-302F clamp is supplied with red vinyl hand grip
* Holding capacity is 136kg
* Stroke is 25.0mm with handle locking in a 45deg position
TOGGLE CLAMP: GH-305-E HORZ PUSH TYPE
SKU:
TC-200680
** The GH-305E clamp is suitable for light medium or heavy duty operations
* Each clamp is supplied with a ductile iron base, precision machined for flatness
* Close tolerances between the base and plunger allow these clamps to be used for pin locating gauges as well as clamping devices
* Plunger locks in extended or retracted position
* These clamps are supplied with adjustable end screw for fine adjustment
* The GH-305E clamp is supplied with red vinyl hand grip
* Holding capacity is 386kg
* Stroke is 36.0mm with handle locking in verticle position
TOGGLE CLAMP: GH-451 LATCH STAINLESS STEEL
SKU:
TC-200981
SPINDLE: M16 X L110MM
SKU:
TC-201060
