- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
TOGGLE CLAMP: GH-101-J VERT
Excl. GST: $34.00
Incl. GST: $39.10
Incl. GST: $39.10
TOGGLE CLAMP: GH-201-A HORZ
Excl. GST: $13.60
Incl. GST: $15.64
Incl. GST: $15.64
TOGGLE CLAMP: GH-200-WH HORZ
Excl. GST: $28.00
Incl. GST: $32.20
* This clamp is supplied with spindle assembly and red vinyl hand grip
* Holding capacity 400kg
* Handle is in a horizontal position when clamped
* Spindle is fitted with rubber holding pad
| Weight | 0.652 kg |
|---|---|
| Dimensions | 0.2 × 0.06 × 0.06 cm |
In stock
Description
| DESCRIPTION | Toggle Clamp |
|---|---|
| MODEL | GH-200-WH |
| TYPE | Horizontal Handle When Lock |
| ARM LENGTH | 60.0mm |
| CLAMPING FORCE | 400Kg |
| WEIGHT NETT/GROSS | 0.652/ 0.654kg |
| VOLUME | 0.0007cm |
| BASE MEASUREMENTS | L70.0mm x W50.0mm |
| BASE HOLE MEASUREMENTS | L42.0mm Centres W30.0mm Centres |
| BASE TO ARM | 80.0mm |
Shipping & Delivery
Related products
TOGGLE CLAMP: GH-201-AL HORZ
SKU:
TC-200360
TOGGLE CLAMP: GH-201-C HORZ
SKU:
TC-200390
TOGGLE CLAMP: GH-302F HORZ PUSH TYPE
SKU:
TC-200580
* The GH-302F clamp is suitable for light medium duty operations
* Each clamp is supplied with a pressed steel base
* Close tolerances between the base and plunger allow these clamps to be used for pin locating gauges as well as clamping devices
* These clamps are supplied with adjustable end screw for fine adjustment
* The GH-302F clamp is supplied with red vinyl hand grip
* Holding capacity is 136kg
* Stroke is 25.0mm with handle locking in a 45deg position
TOGGLE CLAMP: GH-304-H HORZ PUSH TYPE
SKU:
TC-200700
* The GH-304H clamp is suitable for light medium or heavy duty operations
* Each clamp is supplied with a ductile iron base, precision machined for flatness
* Close tolerances between the base and plunger allow these clamps to be used for pin locating gauges as well as clamping devices
* Plunger locks in extended or retracted position
* These clamps are supplied with adjustable end screw for fine adjustment
* The GH-304H clamp is supplied with red vinyl hand grip
* Holding capacity is 680kg
TOGGLE CLAMP: GH-451 LATCH
SKU:
TC-200980
SPINDLE: M8 X L62.0MM
SKU:
TC-201120
TOGGLE CLAMP: GH-36224M PUSH TYPE
SKU:
TC-201506
TOGGLE CLAMP: GH-30609 PUSH TYPE
SKU:
TC-201625