- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
TAP: BSW 3/4" X 10 TAPER HAND TAP
Excl. GST: $41.00
Incl. GST: $47.15
Incl. GST: $47.15
TAP: BSW 1" X 8 TAPER HAND TAP
Excl. GST: $59.00
Incl. GST: $67.85
Incl. GST: $67.85
TAP: BSW 7/8″ X 9 TAPER HAND TAP
Excl. GST: $48.00
Incl. GST: $55.20
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world’s first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* This Taper tap has an 8 thread lead in
| Weight | 0.17 kg |
|---|---|
| Dimensions | 0.15 × 0.03 × 0.03 cm |
In stock
Related products
TAP: BSW 1/4″ X 20 3PC SET HAND TAPS
SKU:
TAP3283016
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 5/16″ X 18 3PC SET HAND TAPS
SKU:
TAP3283021
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 7/16″ X 14 3PC SET HAND TAPS
SKU:
TAP3283028
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 9/16″ X 12 3PC SET HAND TAPS
SKU:
TAP3283036
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 3/4″ X 10 3PC SET HAND TAPS
SKU:
TAP3283048
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 1-1/4″ X 7 3PC SET HAND TAPS
SKU:
TAP3283070
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 7/32″ X 24 TAPER HAND TAP
SKU:
TAP3293114
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* This Taper tap has an 8 thread lead in
TAP: BSW 1/4″ X 20 TAPER HAND TAP
SKU:
TAP3293116
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* This Taper tap has an 8 thread lead in