- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
PLANER: TANNER TP-106J 610MM 5.5KW 3PH SPIRAL CUTTER HEAD
$9,300.00
* TANNER TP-610 Planer with 610mm planing width
* Industrial quality machine
* Fitted with spiral cutter head
* 3pcs motor-driven upper feed rollers
* Rubber-coated outfeed rollers to endure a perfect feeding in any conditions
* Partial view of cutterblock and feed system
* Powerful 5.5hp main motor (10hp is optional)
* Cutterblock with antikick-back guard
* This model comes with table power rise and fall
| Weight | 880 kg |
|---|---|
| Dimensions | 1.12 × 0.92 × 1.05 cm |
In stock
Description
| CUTTING WIDTH | 610mm |
|---|---|
| MAX CUTTING HEIGHT | 300mm |
| MIN LENGTH | 220mm |
| MIN THICKNESS | 5.0mm |
| FEED SPEEDS | 6, 5, 9m/min |
| FEED RATE | |
| CUTTERHEAD SPEED | 5000mm |
| CUTTER HEAD DIAMETER | 100.0mm |
| CUTTER HEAD | Spiral Head 15 x 15 x 2.5mm |
| TCT INSERTS | 150pcs |
| INSERT MODEL | |
| MOTOR | 5.5Kw 3 Phase |
| WEIGHT NETT/GROSS | 800/880kg |
| VOLUME | 1.0819cm |
| PACKING SIZE L X W X H | 1120 x 780 x 1200mm |
Shipping & Delivery
Related products
PLANER: TANNER 12″ 1.5KW 1PH
SKU:
TKN112122
PLANER: MB-104 16″ 4HP 1PH
SKU:
TKN112600
* This machine comes with a powerful 4hp single phase motor
* Equiped will Four knife cutterhead
* Serrated infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Fully enclosed carbinet stand
* Overhead rollers for passing workpiece over when re-machining
PLANER: TANNER 16″ 2.5HP 1PH MOTOR UNDER
SKU:
TKN112610
* This Tanner 16: Planer comes with a 2.5hp single phase motor
* Equiped wilh three knife 72.0mm cutterhead
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Fully enclosed carbinet stand
* Overhead rollers for passing workpiece over when re-machining
PLANER: TANNER 16″ 2.2KW 1PH MOTOR UNDER
SKU:
TKN112618
* This Tanner TP-1040F 16" Planer comes with a 2.2kw motor
* Equiped wilh 3 blade cutter head
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Fully enclosed carbnet stand
PLANER: TANNER TH410A 16″ 3HP 1PH INDUSTRIAL S/HEAD
SKU:
TKN112620
* This Tanner 16: Industrial Planer comes with a 3.0hp single phase motor
* Equiped wilh three knife 72.0mm cutterhead
* Serrated steel infeed rollers
* The machine is equiped with anti-kickback fingers for operator safety
* Large extension infeed and outfeed table are fitted allowing for maximum workpiece support
* Oil bath gearbox for feed speed change
* Heavy cast iron table
* Top mounted dust chute
PLANER: TANNER CT-508 20″ 3HP 1 PHASE
SKU:
TKN114210
* The TANNER CT-508 20 Planer provides a cutting capacity of up to 20" wide
* Maximum planing thickness is 6.0mm
* With rollers situated on the top of the machine allows stock to pass over the machine
* Using the in-feed and out-feed roller support operation is easy and convenient
* An oil-bath lubricated gear box provides very smooth feeding
* Lifting lever is provided to allow for easy maneuverability
* The unit is the result of quality engineering which meets with CSA standards
* All components precision machined for complete interchangeability and added value
* A rugged machine which has been proven in the field for many years
PLANER: TANNER CT-508 20″ 5HP 3PH
SKU:
TKN114234
* The TANNER TPC-508 offers a cutting capacity up to 20 wide and a depth of 6.0mm
* Solid cast construction make this machine very rigid
* Four heavy columns suport the cutterhead
* Oil bath lubricating gearbox provides very smooth feeding
* Cutterhead is dynamically balanced to provide smooth running and a good finish
* Both infeed and outfeed tables are heavy cast to provide support to the workpiece
* Two rollers are built on top of the machine offering convenient material handling
* This model has a 5hp three phase motor
* A proven perfomer over many years of development
PLANER: TANNER FOUR SIDER 230MM 10HP
SKU:
TKN115000
* TANNER MS-423 4 side Planer
* Industrial quality machine with table surface of high ductile cast iron
* Cutterhead guard is manufactured from HSS, heat treated and hard chromed
* Numerical control panel allows sizing adjustment of cutters for convenience and rapit settings
* Fitted with overload protection - cutter will stop within 3 seconds !
* Feeding roller is combined with pneumatic and gearbox feed system
* Feeding can be opperated in jog mode for accurate settings
* The table surface adops a newly designed pneumatic lubrication for feeding all types of timber