- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
PLANE FIXED BLOCK: 225 x 50 x 25MM SLOTTED PC
Excl. GST: $60.00
Incl. GST: $69.00
Incl. GST: $69.00
PLANE FIXED BLOCK: 500 x 75 x 25MM SLOTTED PC
Excl. GST: $155.00
Incl. GST: $178.25
Incl. GST: $178.25
PLANE FIXED BLOCK: 300 x 50 x 25MM SLOTTED PC
Excl. GST: $130.00
Incl. GST: $149.50
* PC series plane fixed blocks can be accurately positioned through holes and grooves, and can be adjusted freely in a certain range through slots *
* With V-type block T type fixture can be flexible collocation *
* The material is made of pre-hardening die steel with special compound treatment on the surface *
| Weight | 1.83 kg |
|---|---|
| Dimensions | 0.3 × 0.05 × 0.025 cm |
In stock
Related products
WELDING TABLE: 3D 1500 X 1000 X 200MM 28.0MM 4 LEGS
SKU:
WLT20001103
WELDING TABLE: 3D 2000 X 1200 X 200MM 28.0MM
SKU:
WLT20001105
WELDING TABLE: 3D 4000 X 2000 X 200MM 28.0MM
SKU:
WLT20001112
WELDING TABLE LEGS: 670 X 90MM 4PC SET FOR HK TABLES
SKU:
WLT20001120
WELDING TABLE: 3D 3000 X 1500 X 200MM CT28 NITRIDE
SKU:
WLT20001156
* Diimensional assembly worktable D28 series, on the high precision table, every
50mm/100mm interval distributes the D28mm circular hole
* These holes can be used for holding down workpiece for utmost accuracy
* Working plate made of hardened die steel, specially treated with plasma nitriding on surface previnting rust and scratching, hardness HV≥ 550
Table accuracy: flatness ≤ 0.1mm/㎡, verticality ≤ 0.1mm
BENEFITS OF STEEL:
* Hardness increase, smoother surface. cleaner etching lines.
Note: Spatter resistance is achievable with nitriding treatment.
* Hardness: Differs per treatments:
Standard and Burnishing ~250HV. Nitriding ~550HV.
* Dessity: 7.80 g/cm³.
* Tensile Strength: 355 MPa.
WELDING TABLE: 3D 4000 X 2000 X 200MM CT
SKU:
WLT20001160
* Diimensional assembly worktable D28 series, on the high precision table, every
50mm/100mm interval distributes the D28mm circular hole
* These holes can be used for holding down workpiece for utmost accuracy
* Working plate made of hardened die steel, specially treated with plasma nitriding on surface previnting rust ans scratching, hardness HV≥ 550
Table accuracy: flatness ≤ 0.1mm/㎡, verticality ≤ 0.1mm
BENEFITS OF STEEL:
* Hardness increase, smoother surface. cleaner etching lines.
Note: Spatter resistance is achievable with nitriding treatment.
* Hardness: Differs per treatments:
Standard and Burnishing ~250HV. Nitriding ~550HV.
* Dessity: 7.80 g/cm³.
* Tensile Strength: 355 MPa.
V BLOCK: DIA58 X H50 X 130DEG
SKU:
WLT20001358
HEIGHT ADJUSTING FIXTURE: 100 X 75 X 80MM
SKU:
WLT20001370