- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
PARTING INSERT (GCMX) 4MM PH5135 (PALBIT) (GTN-4)
Excl. GST: $15.50
Incl. GST: $17.83
Incl. GST: $17.83
TPC-7045: DIGITAL READ OUT KIT
Excl. GST: $680.00
Incl. GST: $782.00
Incl. GST: $782.00
Back in Stock Soon
PARTING INSERT (GCMX) 5MM PH5135 (PALBIT) (GTN-5)
Excl. GST: $15.50
Incl. GST: $17.83
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance
* The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear
* Techical Features (PHG) for high wear resistance and long life
| Weight | 0.001 kg |
|---|---|
| Dimensions | 0.1 × 0.03 × 0.03 cm |
Description
| BRAND | PALBIT (EUROPE) SINCE 100YEARS |
|---|---|
| MODEL | GCMX-5N |
| SIZE | W =5,1 B = 4,5 Re = 0,28 |
| BEST FOR | Parting and Grooving |
| SUIT TO BLADE | LTP820008 |
| COATED | TOP COATING (TIN) CVD- ALUMINA COATING |
| HEAT- RESISTANT SUBSTRADE | The cemented-carbide substrate adds high strength for application with focus on high material rmoval |
| APPLICATION | Wet and Dry Machining, External & Internal Turning. Roughing to finishing. |
| WEIGHT NETT/GROSS | 0.0010kg |
| VOLUME | 0.0001cm |
Shipping & Delivery
Related products
MRCN 22TIN32 2.2 PARTING INSERTS
SKU:
LTT800798
NCIH 19-2 2MM PARTING INSERT (NOW LTT944480)
SKU:
LTT800803
MGMN 600-M NC3020 6.0MM PARTING INSERT
SKU:
LTT800808
MGMN 300 3.0MM PARTING & GROOVING INSERT
SKU:
LTT800810
PTNT 02 TIN32 2.0MM PARTING INSERTS
SKU:
LTT800814
TSJ-4 TT8020 TAEGUTEC PARTING & GROOVING
SKU:
LTT801046
PARTING INSERT 3MM PH5135 ( PALBIT)
SKU:
LTT944444
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance
* The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear
* Techical Features (PHG) for high wear resistance and long life
PARTING INSERT 5MM PH5135 (PALBIT)
SKU:
LTT944448
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance
* The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear
* Techical Features (PHG) for high wear resistance and long life