- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
TAPE MEASURE: 7.5M X 25MM 1NCH/METRIC MAXPOWER
Excl. GST: $24.00
Incl. GST: $27.60
Incl. GST: $27.60
TAPE MEASURE: 5M X 25MM 1NCH/METRIC MAXPOWER
Excl. GST: $19.00
Incl. GST: $21.85
Incl. GST: $21.85
LATHE: PA-35 X 3000 PROKING (TAIWAN)
Excl. GST: $0.00
Incl. GST: $0.00
* This ProKing Taiwanese lathe comes in many different configurations.
* Bed is one piece casting.
* All ways are hardened and precision ground.
* Alloy steel spindle with roller bearings.
* All gears and shafts are herdened and ground.
* Electromagnetic spindle brake.
* Fitted with 6 way rapid traverse and power feed to topslide.
* Totally enclosed universal inch/metric gearbox.
* Pressurised one shot lubrication system for cross slide and carriage.
Description
| Swing Over Bed (mm) | 880 |
|---|---|
| Swing Over X-slide (mm) | 615 |
| Swing Over Gap (mm) | 1,340 |
| Between Centres (mm) | 3,000 |
| Bed Width (mm) | 560 |
| Spindle Nose | A2-11 |
| Speeds (no.) | 18 |
| Spindle Bore (mm) | 150 – 300 |
| Metric Threading (M) | 1 – 56 |
| Imperial Threading (tpi) | 1/2 – 28 |
| Tailstock Taper | MT6 |
| Motor (kW) | 18 |
| Voltage (V) | 415 |
| Weight Nett/Gross | |
| Volume |
Shipping & Delivery
Related products
LATHE: GOSAN 2080A 510 X 2000MM 10HP
SKU:
L--109236
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: JESSEY GENERAL 660 X 3000 (TAIWAN)
SKU:
L--110170
* Rigid construction beds are induction hardened and precision ground.
* Harden and ground spindle & gears in headstock for high speed running with low noise.
* Fitted with magnetic brake, and Matrix clutch system.
* Both axes have rapid power feed fitted for quick positioning.
* Rigid tailstock with two speed quill plus rack and handle positioning.
* Front draw chip tray for easy cleaning.
* One-shot oil pump on saddle provides excellent slideways central lubrication.
* Comprehensive range of metric, imperial, diametral & modular threads.
* Made in Taiwan.
LATHE: GL-3040 CHUCK 1600MM WITH 4PC JAWS
SKU:
L--110181
LATHE: LA-560 560 X 1100 X 80MM BORE (TAIWAN)
SKU:
L--110250
LATHE: L22 GM6256 560 X 1000 X 80MM BORE
SKU:
L--120028
* Precision ground & supersonic frequency hardened bedways, with double wall structure for super rigidity.
* Highly accurate & rigid spindle system.
* Optimized design of the main drive, with hardened & ground headstock gears.
* Fitted with 2 axis digital readout, taper turning attachment & quickchange toolpost.
* Over 200 thread cutting options available, in metric, whitworth, module & DP, with no gear changing required.
* Adjustable auto stop mechanism for longitudinal travel.
* Gap bed for larger diameter work pieces.
LATHE: L26 GM6266 660 X 2000 X 105MM BORE (DISCONTINUED)
SKU:
L--120035
* This L26 offers precision ground & supersonic frequency hardened bedways designed in double wall structure giving super rigidity.
* Extra large 105mm spindle bore with good rigidity as well as accuracy.
* Optimised design of the main drive & gears in the headstock are precision ground.
* Lathe can turn up to 200 kinds of metric whitworth module & DP threads without changing gears.
* Auto stop device and footbrake for quick & effective stopping.
LATHE: D-660 660 X 3000 x 105MM BORE Optiturn
SKU:
L--120426
* This lathe sits on a heavy cast iron base with hardened & ground headstock headstock gears and bedway.
* 105mm spinlde bore allows for large diameter shafts to pass through the headstock.
* Very heavy machine and rigid under all conditions.
* Rapid feeds and left hand wheel.
* Huge range of thread cutting available.
* Fitted with Sino 2 axis digital readout, taper turning attachment & quickchange toolpost.
* Coming from one of the best lathe factories in China, this machine will produce high quality components.
LATHE: C62680EX 800 X 3000 X 105MM BORE
SKU:
L--120456
* Supersonic frequency hardened bedways.
* Hardened & ground headstock gears.
* Triple headstock spindle bearings.
* 105mm spindle bore for turning large shafts.
* Fitted with a powerful 15kw motor.
* No gear changing required to cut metric & imperial threads.
* Fitted with Sino 2 axis digital readout, taper turning attachment & quickchange toolpost.