- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
LATHE: CA6250B 500 X 1500 X 80MM BORE
Excl. GST: $23,000.00
Incl. GST: $26,450.00
Incl. GST: $26,450.00
LATHE: AT-430 430 X 1100 X 58MM BORE (TAIWAN) TOP QUALITY
Excl. GST: $29,850.00
Incl. GST: $34,327.50
Incl. GST: $34,327.50
LATHE: LA-560 560 X 1100 X 80MM BORE (TAIWAN)
Excl. GST: $0.00
Incl. GST: $0.00
* This LA lathe is manufactured to exacting standards.
* Heavy duty with full cast bed.
* Good speed range and gap bed.
* Right hand wheel.
* Fitted with digital readout and quickchange toolpost.
* Made in Taiwan.
| Weight | 2100 kg |
|---|---|
| Dimensions | 2.5 × 1.1 × 1.7 cm |
Description
| Swing Over Bed (mm) | 560 |
|---|---|
| Swing Over X-slide (mm) | 390 |
| Swing Over Gap (mm) | 730 |
| Between Centres (mm) | 1,100 |
| Spindle Nose | D1-8 |
| Speeds (no.) | 12 |
| Speed Range (rpm) | 25 – 1,540 |
| Spindle Taper | MT7 |
| Spindle Bore (mm) | 80 |
| Metric Threading (M) | 0.2 – 14 |
| Imperial Threading (tpi) | 2 – 72 |
| Tailstock Taper | MT5 |
| Motor (kW) | 5.625 |
| Voltage (V) | 415 |
| Weight Nett / Gross (kg) | 1900 / 2100 |
| Volume (m³) | 4.675 |
| Packing Size L x W x H (mm) | 2,500 x 1,100 x 1,700 |
Shipping & Delivery
Related products
LATHE: GOSAN 2060AV 510 X 1500MMVARIABLE SPEED
SKU:
L--109234
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: GOSAN 2080A 510 X 2000MM 10HP
SKU:
L--109236
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: GL-3040 CHUCK 1600MM WITH 4PC JAWS
SKU:
L--110181
LATHE: GL-3040 OPEN SUPPORT STANDING LATHE
SKU:
L--110182
LATHE: CA6250B 500 X 1500 X 80MM BORE
SKU:
L--110215
* The CA6250B is a heavy duty lathe with 500mm swing and 80mm spindle bore.
* All headstock gears are hardened and pricision ground for smooth running and long life durability.
* Bed is also induction hardened and ground for durability and log service life.
* Fitted with apron mounted button for rapid lonitudional travel.
* This machine is also fitted with taper turning attachment.
* Two axis digital readout.
* Quick change tool post with 4 holders.
LATHE: L22 GM6256 560 X 1000 X 80MM BORE
SKU:
L--120028
* Precision ground & supersonic frequency hardened bedways, with double wall structure for super rigidity.
* Highly accurate & rigid spindle system.
* Optimized design of the main drive, with hardened & ground headstock gears.
* Fitted with 2 axis digital readout, taper turning attachment & quickchange toolpost.
* Over 200 thread cutting options available, in metric, whitworth, module & DP, with no gear changing required.
* Adjustable auto stop mechanism for longitudinal travel.
* Gap bed for larger diameter work pieces.
LATHE: L26 GM6266 660 X 2000 X 105MM BORE (DISCONTINUED)
SKU:
L--120035
* This L26 offers precision ground & supersonic frequency hardened bedways designed in double wall structure giving super rigidity.
* Extra large 105mm spindle bore with good rigidity as well as accuracy.
* Optimised design of the main drive & gears in the headstock are precision ground.
* Lathe can turn up to 200 kinds of metric whitworth module & DP threads without changing gears.
* Auto stop device and footbrake for quick & effective stopping.
LATHE: C62680EX 800 X 3000 X 105MM BORE
SKU:
L--120456
* Supersonic frequency hardened bedways.
* Hardened & ground headstock gears.
* Triple headstock spindle bearings.
* 105mm spindle bore for turning large shafts.
* Fitted with a powerful 15kw motor.
* No gear changing required to cut metric & imperial threads.
* Fitted with Sino 2 axis digital readout, taper turning attachment & quickchange toolpost.