- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
RING FACEPLATE: 50MM
Excl. GST: $58.00
Incl. GST: $66.70
Incl. GST: $66.70
INSERT: TEKANTOOL B 3/4" X14TPI
Excl. GST: $44.35
Incl. GST: $51.00
Incl. GST: $51.00
INSERT: TEKNATOOL A 3/4″ X14TPI
Excl. GST: $44.35
Incl. GST: $51.00
* This inserts are to convert the Teknatool lathe chucks to the different spindle threads of the vatious lathes that are on the market * This means that any lathe is capable of using the Supernova & AC centre system made by Teknatool *
| Weight | 0.05 kg |
|---|---|
| Dimensions | 0.07 × 0.07 × 0.04 cm |
In stock
Related products
PIN CHUCK: 5/8″ RP3000L RECORD
SKU:
WLA141044
INSERT: TEKNATOOL H 3/4″ X 10TPI
SKU:
WLA142032
INSERT: TEKNATOOL K M18 X 2.5
SKU:
WLA142038
INSERT: TEKNATOOL O 1-1/8″ BSW
SKU:
WLA142044
INSERT: TEKNATOOL W M25 X 2
SKU:
WLA142052
SUPERNOVA2 CHUCK: PRO-TEK
SKU:
WLA142100
* Rust Resistant Nickel Plating
* Stronger 50mm Jaws with Dovetail Profile and Serrations for Maximum holding power
* Clockwise Scroll Rotation for ease-of-use
* Laser Etched Jaw Numbering
* Torx Head Screws are very secure and minimise stripped heads
* T-Bar Torx Wrench for better torque and enabling quicker tightening of screws
* Fully sealed indexing backing plate reinforced with stranded glass fibers for extreme durability that protects the internal gearing from moisture and debris creating low maintenance and ensuring a longer life.
* Self-lubricating copper-infused precision-cast jaw slides for effortless movement and resistance to wear and tear.
SCREW CHUCK: 1-1/2″ HD CWA60 RECORD
SKU:
WLA142112
The wood screw chuck has proved over the years to be the most popular of all lathe accessories. From the most delicate of goblets up to 14 wetwood bowls the wood screw chuck offers the opitmum timber clamping method. There are two styles available both in two sizes of 1 1/2 and 2 diameter. Firstly the CWA60 and CWA61 Heavy Duty Wood Screw Chucks. Consisting of seven precision-machined components both chucks incorporate the unique non-slip screw mechanism which guarantees realignment of the timber once removed thus giving the facility to turn both kiln dry and wet timbers and now commonly used by specialist green-wool turners on out of balance workpieces. The face on all 'Record Coronet' wood screw chucks are inwardly tapered. This enables the outer diameter of the face to positively locate onto the timber.
SCREW CHUCK: 1-1/2″ CWA62 RECORD
SKU:
WLA142116
The CWA 62 woodscrew chuck is precision machined to an internal tolerance of +/- 3/10 of a thousand of an inch ensuring concentricity therefore eliminating spiralling and chattering. Suitable for both hard and softwoods. As a general rule you can turn five times the diameter of the chuck face with a width of times four ie. A 1 1/2 Record woodscrew chuck will hold a block of timber 7 1/2 wide by 6 deep.