HYDRAULIC OIL: AWS-46 20 LITRE HYDRO MANNOL

* Designed for use with airtools * Recomended that you oil airtools every day before use * Total is designed as a high speed lubricant that will not clog up the vanes on your tool * You need to have the correct oil to get the maximum life out of your airtools * It is an ISO Grade 68 oil and has a temperature range of -40°F to 500°F (-40°C to 260°C). Super Lube® Air Tool Pneumatic Lubricant is dielectric, food grade and clean. For rubber and plastic applications see Compatibility Chart under Technical Resources. *

* The Renolin HVI Range is a high quality HVI hydraulic oil and CLP lubricant * This product improces resistance to aging and increases service life * They provide extended greasing intervals whist improving wear & corrosion protection as well as oxidation resistance *

Monograde lubricant for two stroke Diesel engines SPECIFICATIONS International specifications API CF-2/CF MIL.L. 46152B Meets the requirements of  Detroit Diesel : Oil typ 1 and 2 for series : 53, 71, 92, 110 and 149 marine APPLICATIONS This lubricant is suitable for all two stroke Diesel engines when API CF-2 or API CD II specifications are required. TOTAL RUBIA CF-2 40 has been especially developed for the lubrication of two stroke Detroit Diesel engines. It also can be used in Diesel or gasoline engines of old vehicles. PERFORMANCES AND CUSTOMER BENEFITS  Good anti-wear and anti-corrosion properties  Excellent anti-oxidation properties allowing long time idle or very severe working conditions (hot climates, heavy load…)  Low ash value ensuring good engine cleanliness  Very high performance detergent and dispersant additives PHYSICAL AND CHEMICAL CHARACTERISTICS* TOTAL RUBIA CF-2 40 Method Value Kinematic Viscosity at 40°C mm2 /s ASTM D445 145.9 Kinematic Viscosity at 100°C mm2 /s ASTM D445 14.5 Viscosity Index - ASTM D2270 98 T.B.N mgKOH/g ASTM D2896 7.1 Pour Point °C ASTM D97 -15 Sulphated Ash % m/m ASTM D874 0.77