- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
PIPE BENDER: TANNER HHW-40A HYDRAULIC
Excl. GST: $4,600.00
Incl. GST: $5,290.00
Incl. GST: $5,290.00
HYDRAULIC HORZ BENDER: HHP-40 51MM CAPACITY (PIPE)
Excl. GST: $3,200.00
Incl. GST: $3,680.00
Incl. GST: $3,680.00
HYDRAULIC HORZ BENDER: HHP-22 42MM CAPACITY (PIPE)
Excl. GST: $3,200.00
Incl. GST: $3,680.00
The HHP-22 hydraulic bender is a very versitile machine with mulitple applications * Bending for flat plate up to 120mm in height * Pipe bending – steel pipe to 37mm * Punching 16-35mm * Shearing 10 x 100mm * Has large working table of 630mm x 1100mm *
| Weight | 420 kg |
|---|---|
| Dimensions | 1.23 × 1.31 × 1.1 cm |
Description
| MODEL: | CP-42A |
|---|---|
| FUCTION: | Bend Pipe and Flat, pipe, punch, shear. |
| MAX BENDING POWER: | 22 Ton |
| MAX BENDING HEIGHT: | 120mm |
| CARRIAGE STROKE: | 200mm |
| FEED SPEED: | 29mm/Sec |
| TABLE DIMENSIONS: | 630mm X 1100mm |
| ELECTRIC MOTOR: | 2HP 1 Phase |
| MACHINE FOOTPRINT: | 1230 x 1310 x 1100mm |
| WEIGHT NETT/GROSS: | 620kg |
| VOLUME: | 1.7724cm |
Shipping & Delivery
Related products
PIPE BENDER: 16000KG AIR-HYDRAULIC
SKU:
PB-131105
PIPE BENDER: 1/2″-3″ TANNER AIR ASSIT HHW-3Q
SKU:
PB-132135
* This hydraulic pipe bender come mounted on three legs and 8 formers.
* This bender is air assisted and require air pressure pressure of 120psi.
Also can be used by hand without air assist
These benders are for precision cold bending of thick wall pipe (schedual 40-80)
* maximum bending range is 90deg
* This bender has a range of 1/2" to 3" pipe
* Great bender for workshops or farm maintenance etc
PIPE BENDER: 1/2″- 3″ WITH CASTORS & 8PCS FORMERS HHW-3
SKU:
PB-132142
PIPE BENDER: 1/2″- 2″ ON STAND 6PCS FORMERS HHW-2F
SKU:
PB-132144
PIPE BENDER: 1/2″- 2″ MOTORISED 1PH TANNER – HHW-2D:
SKU:
PB-132150
* This hydraulic pipe bender come with tri stand
* Capable of bending angles 0 - 90 degrees
* No pre-warming required
* Fitted with seperate heavy duty pump
* Comfortable working height with tripod stand
* Longer pistion stroke means less strokes to achieve goal
* Supplied in wooden case with 6 formers and service packy.
PIN: TO RETAIN BOBIN
SKU:
PB-134144
HYD SEAL KIT: PIPE BENDER BRAMLEY
SKU:
PB-134145
PIPE BENDER: TANNER HHW-40A HYDRAULIC
SKU:
PB-134300
* Simple type mechanical/hydraulic pipe bending machine complete with fine formers.
* Manual clamping of bending dies with quick release clamp.
* Setting the angle is by digital readout on the control panel.
* Bending operation is activated by remote foot control.
* A total of 33 sets of dies are available for this model.