- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
WELDING TABLE: 3D 1200 X 1200 X 200MM 28.0MM 4 LEGS
Excl. GST: $4,950.00
Incl. GST: $5,692.50
Incl. GST: $5,692.50
LOCKING PIN: 85MM X ø28
Excl. GST: $45.00
Incl. GST: $51.75
Incl. GST: $51.75
Back in Stock Soon
HOLD DOWN CLAMP: 200 X 200MM 180 DEG
Excl. GST: $68.00
Incl. GST: $78.20
* TJ series 90 ° pipe clamp, make accurate powerful clamping 180 ° possible
* Horizontal bar can adjust the range of 40-180mm, the vertical bar has different
length specifications, and the adjustment range is also different
* The vertical tube increases the adjusting ring, which can help the adjustment better
| Weight | 1.2 kg |
|---|---|
| Dimensions | 0.22 × 0.12 × 0.12 cm |
Description
| DESCRIPTION | Hold Down Clamp |
|---|---|
| MODEL NUMBER | TJ28200 |
| MEASUREMENTS A | 79mm (Locking Screw Travel ) |
| MEASURMENT B | 200mm (Horizontal Bar Travel) |
| MEASUREMENT C | 200mm (Vertice Bar Length) |
| HORIZONTAL BAR TRAVEL | 40-180mm ( Throat Travel ) |
| MAXIMUM LOAD | 3.5kN |
| WEIGHT NETT/GROSS | 1.20kg |
| VOLUME | 0.0032cm |
Shipping & Delivery
Related products
WELDING TABLE: 3D 1000 X 1000 X 200MM 28.0MM 4 LEGS
SKU:
WLT20001101
WELDING TABLE: 3D 2000 X 1200 X 200MM 28.0MM
SKU:
WLT20001105
WELDING TABLE LEGS: 670 X 90MM 4PC SET FOR HK TABLES
SKU:
WLT20001120
WELDING TABLE: 3D 3000 X 1500 X 200MM CT28 NITRIDE
SKU:
WLT20001156
* Diimensional assembly worktable D28 series, on the high precision table, every
50mm/100mm interval distributes the D28mm circular hole
* These holes can be used for holding down workpiece for utmost accuracy
* Working plate made of hardened die steel, specially treated with plasma nitriding on surface previnting rust and scratching, hardness HV≥ 550
Table accuracy: flatness ≤ 0.1mm/㎡, verticality ≤ 0.1mm
BENEFITS OF STEEL:
* Hardness increase, smoother surface. cleaner etching lines.
Note: Spatter resistance is achievable with nitriding treatment.
* Hardness: Differs per treatments:
Standard and Burnishing ~250HV. Nitriding ~550HV.
* Dessity: 7.80 g/cm³.
* Tensile Strength: 355 MPa.
HOLD DOWN CLAMP: 300 X 150MM 90 DEG
SKU:
WLT20001210
* TJ series 90 ° pipe clamp, make accurate powerful clamping 180 ° possible *
* Horizontal bar can adjust the range of 40-180mm, the vertical bar has different
length specifications, and the adjustment range is also different *
* The vertical tube increases the adjusting ring, which can help the adjustment better *
HOLD DOWN CLAMP: 300 X 300MM 90 DEG
SKU:
WLT20001238
* TJJ series 45 °pipe fixture can precisely clamp the welding parts with inclined
angle and can be changed up and down *
* The adjustable range of horizontal bar is 55-145 mm *
* A regulation ring is added to the vertical tube, which can help the adjustment better.
number a b c maximum load stock *
V BLOCK: DIA58 X H50 X 120DEG
SKU:
WLT20001354
V BLOCK: DIA58 X H50 X 130DEG
SKU:
WLT20001358