- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
DRILL BIT: 5/32" X 100MM LONG HSS
Excl. GST: $10.90
Incl. GST: $12.54
Incl. GST: $12.54
EDGE FINDER: EF/2M
Excl. GST: $26.57
Incl. GST: $30.56
Incl. GST: $30.56
EDGE FINDER: METRIC
Excl. GST: $27.00
Incl. GST: $31.05
* Edge and centre finders are hardened all over and ground on all working surfaces
* The edge finder works equally well on round or straight surfaces
* The centre finder will pick up crosslines to machine drill or bore holes to a layout
* The combination edge and centre finder is ahandy tool as one instrument serves both puposes
| Weight | 0.04 kg |
|---|---|
| Dimensions | 0.1 × 0.03 × 0.03 cm |
In stock
Related products
EDGE FINDER: EF/2M
SKU:
ECF400110
* Edge and centre finders are hardened all over and ground on all working surfaces
* The edge finder works equally well on round or straight surfaces
* The centre finder will pick up crosslines to machine drill or bore holes to a layout
* The combination edge and centre finder is a handy tool as one instrument serves both puposes
EDGE FINDER: EF/
SKU:
ECF400130
* Edge and centre finders are hardened all over and ground on all working surfaces
* The edge finder works equally well on round or straight surfaces
* The centre finder will pick up crosslines to machine drill or bore holes to a layout
* The combination edge and centre finder is a handy tool as one instrument serves both puposes
EDGE FINDER: EF/4M
SKU:
ECF400140
* Edge and centre finders are hardened all over and ground on all working surfaces
* The edge finder works equally well on round or straight surfaces
* The centre finder will pick up crosslines to machine drill or bore holes to a layout
* the combination edge and centre finder is a handy tool as one instrument serves both purposes
EDGE FINDER: EF/8
SKU:
ECF400145
* Edge and centre finders are hardened all over and ground on all working surfaces
* The edge finder works equally well on round or straight surfaces
* The centre finder will pick up crosslines to machine drill or bore holes to a layout
* The combination edge and centre finder is a handy tool as one instrument serves both purposes
EDGE & CENTRE FINDER: EF/5
SKU:
ECF400150
* Edge and centre finders are hardened all over and ground on all working surfaces
* The edge finder works equally well on round or straight surfaces
* The centre finder will pick up crosslines to machine drill or bore holes to a layout
* The combination edge and centre finder is a handy toll as one instrument serves both purposes
DOUBLE EDGE FINDER: EF/7M
SKU:
ECF400170
* Edge and centre finders are hardened all over and ground on all working surfaces
* The edge finder works equally well on round or straight surfaces * The centre finder will pick up crosslines to machine drill or bore holes to a layout
* The combination edge and centre finder is a handy tool as one instrument serves both purposes *
WIGGLE CENTRE FINDER: 4 TIPS
SKU:
ECF400280
* Precision set ups with speed and accuracy demanded in modern machine work are possible by using one or another of these interchangeable attachements
* You can indicate from tool makers buttons or holes ground surfaces sides or round work gauge blocks and true to layout lines with this wiggler
* The bent shaft holds indicators of all types and allows the back of the indicator to be positioned on the spindle centre
* Balls and body are hardened
* Knurled collar adjusts chuck spring tension and maintains adjustment
* Interchangeable shafts easily and quickly snap into place
ELECTRONIC EDGE FINDER: BEEP TYPE
SKU:
ECF400420
* This optical edge finder with touch point sensor
* With red light and beep fuction
* Designed for 2D aligning of component reference surfaces * edges, determing both centres with reference to the centre of the machine spindle
* Industrial robust& non waring designwith bode made from hardened steel& a spring loaded highly accurat steel ball
* On the contact the spherical tip & the metal component the unit lights upthus identifying the point of reference
* All components are hardened & accuurately ground
* Concentricity controlled to within 0.010mm
* Roads off any electrically conductive metal
* Come in wooden case for safe storage