- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
DRUM SANDER: WDS-630C 25"
Excl. GST: $6,450.00
Incl. GST: $7,417.50
Incl. GST: $7,417.50
DRUM SANDER: 20 3HP DOUBLE DRUM
Excl. GST: $8,123.20
Incl. GST: $9,341.68
Incl. GST: $9,341.68
DRUM SANDER: 460MM 1.5KW 1 PHASE OPEN SIDE
Excl. GST: $2,960.00
Incl. GST: $3,404.00
The variable speed rubberised feed belt protects the underside of panels during feed
* Drums can be configured with coarse paper on the front and fine paper on the rear to allow you to produce a finshed board in one pass.
| Weight | 130 kg |
|---|---|
| Dimensions | 0.88 × 0.62 × 0.8 cm |
Description
| DESCRIPTION | Drum Sander |
|---|---|
| MODEL | DS-18 |
| MAX WIDTH | 460mm |
| MIN THICKNESS | 5.0mm |
| MAX WORKPIECE HEIGHT | 100mm |
| WORKING TABLE | 460 X 465mm |
| SANDING ROLL SPEED | 2800rpm |
| SANDING PAPER SIZE | 75.0mm x 2100mm |
| MAX SANDING SPEED | 0.5m/min |
| MOTOR POWER | 1.5kw 230v 1 Phase |
| FEED MOTOR | 60w |
| FEED BELT SIZE | 1120 X 450mm |
| WEIGHT NETT/GROSS | 115/130kg |
| VOLUME | 0.4365cm |
| PACKING L x W x D | 880 x 620 x 800mm |
Shipping & Delivery
Related products
DRUM SANDER: WBS-450 127 X 457MM W/STAND
SKU:
WBS300020
DRUM SANDER: WDS-630C 25″
SKU:
WBS300030
*The variable speed rubberised feed belt ptotects the underside of panels during feed
* Drums can be configured with coarse paper on the front and fine paper on the rear to allow you to produce a finshed board in one pass
* This economical sander provides 630mm boad width
* Fitted with high quality belt for long service life
* Drums are dynamically balanced to ensure smooth running
* This two drum configeration offer high efficient sanding performance
* Simple conveyer belt tracking adjustment
* Dust hood has two 4" dust outlets
DRUM SANDER: MS-3140A 16″ X 3″ OPEN SIDE
SKU:
WBS300070
* Compact single phase drum sander
* Variable speed feed table
* Bench mounted or stand is available
* Sandpaper is easily changed with standard 75mm wide sandpaper which is wound around the drum and fastened by clips at each end of tunhe drum
* Ideal for small workshop
* Maximum sanding width is 400mm.
REDUCTION MOTOR: #114/M02712111A
SKU:
WBS300071
DRUM SANDER: 20 3HP DOUBLE DRUM
SKU:
WBS300080
* This double drum sander is ideal for high volume work * Dynamically balanced sanding drums to ensure smooth running * Height adjustment by each drum can be fitted with a different grades of sandpaper to get the desired finish * Large handwheel * Sandpaper is easy to change with no belts required * Using standard 150mm wide sandpaper rolls can be cut to suit this machine thus saving the expence of ordering special belts * Seperate feed motor for timber *
DRUM SANDER: MS-25 3HP 1PH D/DRUM
SKU:
WBS300094
* Economical drum sander with 25 sanding capacity * Variable speed feed motor with feed speeds of 3.8 - 38F/pm * Dynamically balanced sanding drums to ensure smooth running * Comes with 4 dust outlet for extraction * Fitted with 5 diameter sanding drums * Simple to change sandpaper by using standard rolls and cut to suit *
DRUM SANDER: MS-25 3HP 3PH D/DRUM
SKU:
WBS300096
* Economical drum sander with 25 sanding capacity * Variable speed feed motor with feed speeds of 3.8 - 38F/pm * Dynamically balanced sanding drums to ensure smooth running * Comes with 4 dust outlet for extraction * Fitted with 5 diameter sanding drums * Simple to change sandpaper by using standard rolls and cut to suit *
DRUM SANDER: SANDPAPER HOLDING CLIPS
SKU:
WBS300900