- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
DRILL: GEARED HEAD ZS-40APS AUTO 3PH
$4,500.00
* Heavy duty geared head drilling machine.
* Tilting head and rotating table.
* Heavy column and base to give this machine rigidity.
* Good spindle travel.
* Fitted with coolant system with fluid resevoir in the base of the machine.
* Automatic feeding.
| Weight | 350 kg |
|---|---|
| Dimensions | 0.76 × 0.76 × 1.9 cm |
Description
| Capacity (mm) | 40 |
|---|---|
| Table Size (mm) | 470 x 470 |
| Speeds (no.) | 6 |
| Speed Range (rpm) | 50 – 1250 |
| Spindle Taper | MT4 |
| Tapping Capacity | M20 |
| Quill Stroke (mm) | 110 |
| Swing (mm) | 540 |
| Column Diameter (mm) | 115 |
| Motor (kW) | 1.125 |
| Voltage (V) | 415 |
| Weight Nett / Gross (kg) | 310/ 350 |
| Volume (m³) | 1.0974 |
| Packing Size L x W x H (mm) | 760 x 760 x 1097 |
Shipping & Delivery
Related products
DRILL: GEARED HEAD GHD-T25A 3PH
SKU:
DMC348942
DRILL: GEARED HEAD ZX40H MT4 3PH 12 SPEED
SKU:
DMC359075
DRILL: GEARED HEAD WDM30A MT4 3PH
SKU:
DMC359079
DRILL: GEARED HEAD WDM30B MT4 1PH
SKU:
DMC359080
DRILL: GEARED HEAD JZB5032 MT4 1 PH
SKU:
DMC359081
DRILL: GEARED HEAD Z5032 MT4. 420 V Three Phase.
SKU:
DMC359175
DRILL: GEARED HEAD Z5040E MT4
SKU:
DMC359180
* Heavy duty drilling machine for industrial use.
* Equipped with power feed on the quill with 2 feed rates.
* Automatic drift release.
* Feed is controlled by electromagnetic clutch.
* Rise and fall table with 360° rotation and +/- 90° tilt.
* Fitted with tapping switch.
* The electrical system has a short circuit and overload protection.
DRILL: GEARED HEAD Z5050 MT4
SKU:
DMC359195
* Heavy duty drilling machine for industrial use.
* Equipped with power feed on the quill with 3 feed rates.
* Feed is controlled by electromagnetic clutch.
* Large rise and fall table with 360° rotation and +/- 90° tilt.
* Fitted with tapping switch.
* The electrical system has a short circuit and overload protection according to CE standard.