CRC: LANOCOTE NATURAL 500ML

* CRC Marine 66 has multiple applications in all marine environments * Use on Boats, Cars and Trailers to protect against corrosion for extended periods * Repels water, prevents ingress and starts wet engines * Frees corroded parts on vehicles and trailers, springs, shackles, domes and zips, lubricates all mechanical parts and penetrates overtight or rusted nuts, bolts and fittings *

CRC CPC 250 is a clear, dry film corrosion inhibitor that creeps quickly to cover exposed metal surfaces, drives out moisture and leaves an ultra-thin, non-staining film that protects metal against corrosion. CRC CPC 250 is an exceptional choice for damp, moist or dusty storage environments. The thin film repels dirt and dust to keep stored parts and equipment clean and will not run or puddle during storage. CRC CPC 250 is highly effective in humid conditions or after floods. The protective film resists oxidation and prevents flash rusting during storage. Suitable for components which have been machined with water miscible fluids and require long-term storage prior to further use. Long-term or ongoing protection is gained through reapplication. If necessary the protection film can be easily removed with CRC Precision CO Contact Cleaner or solvents. Features & Benefits Dry Film – Treated parts may be easily handled without removing the film Non-Emulsifying in water – Promotes water displacement from surfaces Conductivity – Will not restrict electrical current flow Non-Staining – Will not discolour paper packaging Ready to Use – No additional mixing or chemical additives required Fast Drying – Allows parts to be handled quickly. Drying time to touch is one hour. Easy re-application over existing film and/or clean surfaces – Provides ongoing protection Safe on paint and most plastics Uses Hand tools, cutting tools Guns Blister-packed or shrink-wrapped metal parts Dies, moulds and parts in storage Electrical contacts and wiring terminals Machined parts prior to assembly Aluminium extrusions Protection against finger print corrosion on soft metals

* Superon " Flawcheck" will locate surface discontinuities or other indications on all non-porousmaterials (metals, plastics, ceramics etc ) include: Cracks, Seams, Porosity< Laps, Laminations, Cold Shuts * Used to detect welding, casting and forging defects, cracks and leaks in new components and fatigue on/in service components * Will deterct a wide spectrum of flaw sizes regardless of flaw orientation, up to 1 micron to 30 micron depth on standard NI-Cr test panel * Superior caplary action, Non-toxic, Non-corrosive, Free from halides & sulfides