- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
SLIDE HAMMER: 12PC DENT PULLER WITH ATTACHMENTS
Excl. GST: $190.00
Incl. GST: $218.50
Incl. GST: $218.50
COUNTER SINK BIT INSERT: TCGX163504-TC20
Excl. GST: $33.00
Incl. GST: $37.95
Incl. GST: $37.95
COUNTER SINK BIT: 5 – 25.0MM (1 INSERT)12mm Shank + Wear Strip
Excl. GST: $275.00
Incl. GST: $316.25
* This is a very special countersink bit with long tool life
* The body has three cabide inserts to protect ware on the body of this tool
* Has one replaceable insert which has three cutting edges
Comes mounted on 12.0mm shank
Carbide wear blanks are replaceable should they ever ware out
* A very special countersink which has won aclaim from many end users !
* Available in two sizes 5-25mm & 25-45mm
| Weight | 0.68 kg |
|---|---|
| Dimensions | 0.16 × 0.05 × 0.05 cm |
In stock
Description
| DESCRIPTION | Countersink Bit 1 Insert + Carbide Wear Strip Carbide Body |
|---|---|
| NO PIECES | Single |
| RANGE | 5.0 – 25mm |
| TOTAL INSERTS | 0ne * Carbide Wear Strip |
| INSERT TYPE | TCGX163504-TC20 ONLY |
| APPROACH ANGLE | 90 Deg |
| SHANK TYPE/SIZE | 12.0mm Straight Shank |
| CHEVPAC INSERT CODE | CTB300244 |
| LOCATION | (In Box with countersink) |
| WEIGHT NETT/GROSS | 0.680kg |
| VOLUME | 0.0004cm |
| (INSERT NOT INCLUDED) |
Shipping & Delivery
Related products
COUNTER SINK BIT INSERT: SUIT 7-44MM CHAM-SINK NEW
SKU:
CTB2843608
COUNTER SINK BIT INSERT: SUIT 7-44MM CHAM-SINK OLD
SKU:
CTB2843611
COUNTER SINK BIT: 7- 44.0MM (3 INSERTS) 16MM (S/SHANK)
SKU:
CTB2843618
* This large heavy duty countersink bit comes with 13,0mm shank
* This countersink bit takes 3pc carbide inserts set at 90deg
Well balanced with less chatter
* Insert code is CTB8243618
* Cuts upto 60HRC
* Designed to countersink difficult and hard materials like flame cut stainless stel or wear plate
COUNTER SINK BIT: 12-54.0MM (3 INSERT) CHAM-SINK 16MM SK
SKU:
CTB2843624
COUNTER SINK BIT: 1/2″ to 1-3/4″ 1 X TPGH433 1 X INSERT
SKU:
CTB2843630
COUNTER SINK BIT: 1-1/4″ to 2-1/2″ 3/4″ SHANK 1 X INSERT
SKU:
CTB2843634
COUNTER SINK BIT: 25-45mm (1 INSERT) 12mm SHANK-c/wWear strip
SKU:
CTB300242
* This is a very special countersink bit with long tool life
* The body has three cabide inserts to protect ware on the body of this tool
* Has one replaceable insert which has three cutting edges
Comes mounted on 12.0mm shank
Carbide wear blanks are replaceable should they ever ware out
* A very special countersink which has won aclaim from many end users !
* Available in two sizes 5-25mm & 25-45mm
COUNTER SINK BIT INSERT: TCGX163504-TC20
SKU:
CTB300244