- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
LGF: GAMMA POWER 1000 (REPAIRED UNIT)
Excl. GST: $3,200.00
Incl. GST: $3,680.00
Incl. GST: $3,680.00
MITRE SAW: LGF PENTA MITRE
Excl. GST: $24,500.00
Incl. GST: $28,175.00
Incl. GST: $28,175.00
AUTO CUT SAW: LGF OLIMPYA
Excl. GST: $28,000.00
Incl. GST: $32,200.00
* This LGF automatic cut off saw offers the utmost in cutting safety and speed.
* Fitted with auto pneumatic clamping and mist spray unit for a clean cutting cycle.
* Head can be tilted to -45° / 90° / 45° by switch.
* Possibility of performing all angles from 30° left to 30° right.
* Fully enclosed working area.
* Can be fitted with blades from Ø 500mm – Ø 550mm.
| Weight | 500 kg |
|---|---|
| Dimensions | 1.9 × 1 × 1.1 cm |
Related products
TWIN HEAD SAW: MERRIT CHINA
SKU:
ALU100126
PORTABLE SAW: LGF ARES
SKU:
ALU301000
MITRE SAW; QCS-400 UP CUTTING
SKU:
ALU301040
AUTO CUT SAW: OMC BIFRA 550 A UP CUT
SKU:
ALU301305
** This OMC automatic cut off saw offers the utmost in cutting safety and speed.
** Fitted with auto pneumatic clamping and mist spray unit for a clean cutting cycle.
** Possibility of performing all angles from 20° left to 20° right.
** Fully enclosed working area.
** It is fitted with blades Ø 550mm.
MITRE SAW: LGF PENTA MITRE
SKU:
ALU301350
* High quality Italian machine.
* Rising blade with adjustable feeding.
* Rotating working bench, mechanical locking devices at 90°/45°/-45°, and pneumatic brakes for intermediate degrees.
* Tilting blade can cut at any angle between 80° and -80°.
* Digital display shows the intermediate degree cuts.
* Complete with trimming fence for performing trim cuts.
* Full safety guarding around the work table.
* Horizontal pneumatic clamping system with rubber pads.
* Can be fitted with blades from Ø 500mm - Ø 530m.
* Spray mist lubrication.
TWIN HEAD SAW:GAMMA SWING DIG
SKU:
ALU302200
* Equipped with electronic positioner.
* With 10” colour screen and touchscreen system.
* Radial sliding of the saw carriage.
* Pneumatic tilting heads from 90° to 45°.
* USB port to save/upload cutting lists and programmes.
* Available in 4mt or 5mt bed length.
* Can be fitted with a 500mm, 530mm or 550mm blade.
* Full protection of the saw blades with automatically closing hoods.
* Horizontal pneumatic clamping system with rubber pads.
* Automatic nebulizer lubrication.
LGF: GAMMA SWING DIGIT PLUS
SKU:
ALU302210
* Equipped with electronic positioner.
* With 10” colour screen and touchscreen system.
* Radial sliding of the saw carriage.
* Pneumatic tilting heads from 90° to +45°.
* USB port to save/upload cutting lists and programmes.
* Available in 4mt or 5mt bed length.
* Available with a 500mm, 530mm or 550mm blade.
* Full protection of the saw blades with automatically closing hoods.
* Horizontal pneumatic clamping system with rubber pads.
* Automatic nebulizer lubrication.
AUTO CUT OFF SAW: XERON
SKU:
ALU303200
* The LGF XERON is a automatic cut off saw with bar feeder.
* Pendulum movement of the sawing group.
* Pneumatic external adjustment of the saw blade feeding.
* Bar feeding by means of paneumatic cylinder.
* Manual setting of cutting length by means of hand wheel from 0 to 660mm complete with metric scale and magnifying glass.
* Fully automatic cutting procedure.
* Full protection safety covers with manual closing.