- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
PLANE FIXED BLOCK: 225 x 50 x 25MM SLOTTED PC
$60.00
* PC series plane fixed blocks can be accurately positioned through holes and grooves, and can be adjusted freely in a certain range through slots *
* With V-type block T type fixture can be flexible collocation *
* The material is made of pre-hardening die steel with special compound treatment on the surface *
| Weight | 1.22 kg |
|---|---|
| Dimensions | 0.23 × 0.05 × 0.025 cm |
In stock
Related products
WELDING TABLE: 3D 1200 X 1000 X 200MM 28.0MM 4 LEGS
SKU:
WLT20001102
WELDING TABLE LEGS: 620 X 90MM 4PC SET FOR HK TABLES
SKU:
WLT20001118
WELDING TABLE: 3D 2400 X 1200 X 200MM CT28 NITRIDE
SKU:
WLT20001152
* Diimensional assembly worktable D28 series, on the high precision table, every
50mm/100mm interval distributes the D28mm circular hole
* These holes can be used for holding down workpiece for utmost accuracy
* Working plate made of hardened die steel, specially treated with plasma nitriding on surface previnting rust ans scratching, hardness HV≥ 550
Table accuracy: flatness ≤ 0.1mm/㎡, verticality ≤ 0.1mm
BENEFITS OF STEEL:
* Hardness increase, smoother surface. cleaner etching lines.
Note: Spatter resistance is achievable with nitriding treatment.
* Hardness: Differs per treatments:
Standard and Burnishing ~250HV. Nitriding ~550HV.
* Dessity: 7.80 g/cm³.
* Tensile Strength: 355 MPa.
TRANSPORT LIFTING RINGS
SKU:
WLT20001200
* TJ series 90 ° pipe clamp, make accurate powerful clamping 180 ° possible
* Horizontal bar can adjust the range of 40-180mm, the vertical bar has different
length specifications, and the adjustment range is also different
* The vertical tube increases the adjusting ring, which can help the adjustment better *
HOLD DOWN CLAMP: 300 X 150MM 90 DEG
SKU:
WLT20001210
* TJ series 90 ° pipe clamp, make accurate powerful clamping 180 ° possible *
* Horizontal bar can adjust the range of 40-180mm, the vertical bar has different
length specifications, and the adjustment range is also different *
* The vertical tube increases the adjusting ring, which can help the adjustment better *
HOLD DOWN CLAMP: 300 X 300MM 90 DEG
SKU:
WLT20001238
* TJJ series 45 °pipe fixture can precisely clamp the welding parts with inclined
angle and can be changed up and down *
* The adjustable range of horizontal bar is 55-145 mm *
* A regulation ring is added to the vertical tube, which can help the adjustment better.
number a b c maximum load stock *
V BLOCK: DIA58 X H50 X 120DEG
SKU:
WLT20001354
HEIGHT ADJUSTING FIXTURE: 100 X 75 X 80MM
SKU:
WLT20001370