- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
RADIAL DRILL: RSB-20F FLOOR STANDING
$1,249.00
RADIAL DRILL: Z3040 x 10/1 TAIWAN
$14,800.00
RADIAL DRILL: TF-900S TAIWAN
$14,800.00
* Good quality industrial machine ideally suited for small to medium size workshop * Power rise and fall of the arm is controlled through a joy stick which makes the operation easy and simple * Good size box table is supplied as standard * Manual and very positive column lock *
| Weight | 1830 kg |
|---|---|
| Dimensions | 1.87 × 0.97 × 2.2 cm |
Description
| MODEL NUMBER | TF-900S |
|---|---|
| COLUMN DIAMETER | 210 mm |
| SPINDLE TAPER | MT4 |
| SPINDLE TRAVEL | 200 mm |
| SPINDLE SPEED RANGE | 88 – 1500 r/min |
| SPINDLE SPEED SELECTION | 6 |
| SPINDLE FEED RANGE | 0.05/ 0.09/ 0.15 |
| SPINDLE FEED SELECTION | 3 |
| DIST SPINDLE NOSE-WORK TABLE | 920 mm |
| WORKTABLE SIZE | 550 x 405 x 315 mm |
| BASE DIMENSION | 1435 x 640 x 150 |
| MAIN MOTOR | 2.0 HP |
| OVERALL SIZE | 1430 x 820 x 2060 mm |
| G.W. / N.W. | 1,920 / 1830 Kg |
| VOLUME | 3.9906cm |
| PACKING SIZE | 1,870 x 970 x 2200 mm |
Shipping & Delivery
Related products
RADIAL DRILL: RSB-20A BENCH
SKU:
RD-355120
* This is an industrial quality drilling machine and is an ideal machine when drilling large workpieces * Outstanding features of include: longitudinal travel of the drill head of 450mm the head can be swiveled 360deg head can be tilted for angled drilling * The large table on this machine measures 460x450mm * This model comes without stand *
RADIAL DRILL: RSB-20F FLOOR STANDING
SKU:
RD-355122
* This is an quality drilling machine and is an ideal machine when drilling large workpieces
* Outstanding features of include:
* Longitudinal travel of the drill head of 420mm
* The head can be swiveled 360deg - head can be tilted for angled drilling
* The large table on this machine measures 460 x 450mm
* This model is floor standing
* Comes with MT2 taper in quill
* This machine is Belt drive
RADIAL DRILL: RSB-20B W/STAND
SKU:
RD-355130
* This is an industrial quality drilling machine and is an ideal machine when drilling large workpieces * Outstanding features of include: longitudinal travel of the drill head of 450mm the head can be swiveled 360deg head can be tilted for angled drilling * The large table on this machine measures 460x450mm * This model comes without stand *
RADIAL DRILL: RDC-32700 MT3
SKU:
RD-355150
RADIAL DRILL: Z3040 x 10/1 TAIWAN
SKU:
RD-355240
RADIAL DRILL: 1000 Z3032 X 10/1
SKU:
RD-355300
* Main parts and key parts are made by high strength cast and special steel material
* Adopting hydraulic pre-selection speed and feed change mechanisms and is sensitive and reliable
* Machanical and electrical controls are centralized on the headstock
* with easy and rapid operation
* The main ways are all case-hardned so as to prolong the service life of the machine
RADIAL DRILL: 1600 Z3050 x 16/1
SKU:
RD-355395
* The Radial Drilling machines are widely used for Drilling, Tapping, Counterboring, Reaming, Boring and others.
* The Z-Series Radial Drill has been developed and manufactured for over 58 years in one of the largest production facilities in the world
* It has a unique Hydraulic variable frequency motor that allows a stepless regulation of the spindle speeds including Forward/Reverse & Stop using one control lever.
RADIAL DRILL: Z1600EVS X 1600MM SERVO VARIABLE SPEED
SKU:
RD-355410
* This new Z5016EVS Radial Drilling machines are now available
* Uses include drilling, Tapping, Counterboring, Reaming, Boring etc
* The Z-Series Radial Drill has been developed and manufactured for over 58 years in one of the largest production facilities in the world
* It has a unique Hydraulic variable frequency motor that allows a stepless regulation of the spindle speeds including Forward/Reverse & Stop using one control lever
* Features include the new digital touch screen display panel