- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
Back in Stock Soon
LATHE: C6266C 660 X 2000 X 105MM BORE
$34,000.00
* Supersonic frequency hardened bedways.
* Hardened & ground headstock gears.
* Triple headstock spindle bearings.
* 105mm spindle bore for turning large shafts.
* Fitted with a powerful 9kW motor.
* No gear changing required to cut metric & imperial threads.
* Fitted with Sino 2 axis digital readout, taper turning attachment & quickchange toolpost.
| Weight | 4005 kg |
|---|---|
| Dimensions | 3.455 × 1.15 × 1.95 cm |
Description
| Swing Over Bed (mm) | 660 |
|---|---|
| Swing Over X-slide (mm) | 420 |
| Swing Over Gap (mm) | 870 |
| Between Centres (mm) | 2,000 |
| Bed Width (mm) | 405 |
| Spindle Nose | D1-8 |
| Speeds (no.) | 12 |
| Speed Range (rpm) | 36 – 1,600 |
| Spindle Bore (mm) | 105 |
| Spindle Taper | MT5 |
| Metric Threading (M) | 1 – 14 |
| Imperial Threading (tpi) | 2 – 28 |
| Tailstock Taper | MT5 |
| Tool Height (mm) | 25 |
| Motor (kW) | 11 |
| Voltage (V) | 415 |
| Weight Nett / Gross (kg) | 3,455kg/ 4,005 |
| Volume | 7.7478cm |
| Packing Size L x W x H (mm) | L 3,750m x W 1,150 x H 1,950 |
Shipping & Delivery
Related products
LATHE: GOSAN 2060AV 510 X 1500MMVARIABLE SPEED
SKU:
L--109234
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: CA6250B 500 X 1500 X 80MM BORE
SKU:
L--110215
* The CA6250B is a heavy duty lathe with 500mm swing and 80mm spindle bore.
* All headstock gears are hardened and pricision ground for smooth running and long life durability.
* Bed is also induction hardened and ground for durability and log service life.
* Fitted with apron mounted button for rapid lonitudional travel.
* This machine is also fitted with taper turning attachment.
* Two axis digital readout.
* Quick change tool post with 4 holders.
LATHE: LA-560 560 X 1100 X 80MM BORE (TAIWAN)
SKU:
L--110250
LATHE: L22 GM6256 560 X 1500 X 80MM BORE
SKU:
L--120029
* Precision ground & supersonic frequency hardened bedways, with double wall structure for super rigidity.
* Highly accurate & rigid spindle system.
* Optimized design of the main drive, with hardened & ground headstock gears.
* Fitted with 2 axis digital readout, taper turning attachment & quickchange toolpost.
* Over 200 thread cutting options available, in metric, whitworth, module & DP, with no gear changing required.
* Adjustable auto stop mechanism for longitudinal travel.
* Gap bed for larger diameter work pieces.
LATHE: CWA61100 1000 X 8000 X 105MM BORE
SKU:
L--120156
* This CWA61100 lathe offers precision ground & supersonic frequency hardened bedways.
* Double wall structure provides super rigidity and accuracy.
* Extra large 105mm spindle bore.
* Optimised design of the main drive.
* Precision ground headstock gears.
* Machine operation does not require gear changes.
* This lathe can turn up to 200 kinds of metric, whitworth, module & DP threads.
* Auto stop device and footbrake offer quick & effective stopping.
LATHE: D-660 660 X 3000 x 105MM BORE Optiturn
SKU:
L--120426
* This lathe sits on a heavy cast iron base with hardened & ground headstock headstock gears and bedway.
* 105mm spinlde bore allows for large diameter shafts to pass through the headstock.
* Very heavy machine and rigid under all conditions.
* Rapid feeds and left hand wheel.
* Huge range of thread cutting available.
* Fitted with Sino 2 axis digital readout, taper turning attachment & quickchange toolpost.
* Coming from one of the best lathe factories in China, this machine will produce high quality components.
LATHE: PA-35 X 3000 PROKING (TAIWAN)
SKU:
L--120437
* This ProKing Taiwanese lathe comes in many different configurations.
* Bed is one piece casting.
* All ways are hardened and precision ground.
* Alloy steel spindle with roller bearings.
* All gears and shafts are herdened and ground.
* Electromagnetic spindle brake.
* Fitted with 6 way rapid traverse and power feed to topslide.
* Totally enclosed universal inch/metric gearbox.
* Pressurised one shot lubrication system for cross slide and carriage.
LATHE: C62680EX 800 X 3000 X 105MM BORE
SKU:
L--120456
* Supersonic frequency hardened bedways.
* Hardened & ground headstock gears.
* Triple headstock spindle bearings.
* 105mm spindle bore for turning large shafts.
* Fitted with a powerful 15kw motor.
* No gear changing required to cut metric & imperial threads.
* Fitted with Sino 2 axis digital readout, taper turning attachment & quickchange toolpost.