- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
LATHE: GL-3040 CHUCK 1600MM WITH 4PC JAWS
Excl. GST: $13,000.00
Incl. GST: $14,950.00
Incl. GST: $14,950.00
LATHE: GL-3040 STEADY REST W/BEARINGS S/LATHE
Excl. GST: $6,450.00
Incl. GST: $7,417.50
Incl. GST: $7,417.50
LATHE: GL-3040 OPEN SUPPORT STANDING LATHE
Excl. GST: $5,000.00
Incl. GST: $5,750.00
* This open support is to suit the GL-3040 standing lathe.
| Weight | 2950 kg |
|---|
Related products
LATHE: GOSAN 2060AV 510 X 1500MMVARIABLE SPEED
SKU:
L--109234
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: GL-3040 3000 X 4000M STANDING LATHE
SKU:
L--110180
* This heavy duty standing lathe has a free standing headstock and tailstock.
* Suitable for large workpiecees and can be adjusted to different lengths between centers.
* Has a 3.5m swing over bed.
* Comprised of three main independent components: headstock, apron, and tailstock.
* Features rapid traverse on all axes.
* Supplied with 4 jaw 1600mm chuck.
* 3 Jaw chuck and faceplate are available to suit.
* Steadies are available to suit customers requirements.
LATHE: GL-3040 CHUCK 1600MM WITH 4PC JAWS
SKU:
L--110181
LATHE: CA6250B 500 X 1500 X 80MM BORE
SKU:
L--110215
* The CA6250B is a heavy duty lathe with 500mm swing and 80mm spindle bore.
* All headstock gears are hardened and pricision ground for smooth running and long life durability.
* Bed is also induction hardened and ground for durability and log service life.
* Fitted with apron mounted button for rapid lonitudional travel.
* This machine is also fitted with taper turning attachment.
* Two axis digital readout.
* Quick change tool post with 4 holders.
LATHE: L22 GM6256 560 X 1500 X 80MM BORE
SKU:
L--120029
* Precision ground & supersonic frequency hardened bedways, with double wall structure for super rigidity.
* Highly accurate & rigid spindle system.
* Optimized design of the main drive, with hardened & ground headstock gears.
* Fitted with 2 axis digital readout, taper turning attachment & quickchange toolpost.
* Over 200 thread cutting options available, in metric, whitworth, module & DP, with no gear changing required.
* Adjustable auto stop mechanism for longitudinal travel.
* Gap bed for larger diameter work pieces.
LATHE: L-6266A 660 X 3000 X 105MM BORE
SKU:
L--120425
* This lathe sits on a heavy cast iron base with hardened & ground headstock headstock gears and bedway.
* 105mm spinlde bore allows for large diameter shafts to pass through the headstock.
* Very heavy machine and rigid under all conditions.
* Rapid feeds and left hand wheel.
* Huge range of thread cutting available.
* Fitted with Sino 2 axis digital readout, taper turning attachment & quickchange toolpost.
* Coming from one of the best lathe factories in China, this machine will produce high quality components.
LATHE: PA-35 X 3000 PROKING (TAIWAN)
SKU:
L--120437
* This ProKing Taiwanese lathe comes in many different configurations.
* Bed is one piece casting.
* All ways are hardened and precision ground.
* Alloy steel spindle with roller bearings.
* All gears and shafts are herdened and ground.
* Electromagnetic spindle brake.
* Fitted with 6 way rapid traverse and power feed to topslide.
* Totally enclosed universal inch/metric gearbox.
* Pressurised one shot lubrication system for cross slide and carriage.
LATHE: C6266C 660 X 2000 X 105MM BORE
SKU:
L--120441
* Supersonic frequency hardened bedways.
* Hardened & ground headstock gears.
* Triple headstock spindle bearings.
* 105mm spindle bore for turning large shafts.
* Fitted with a powerful 9kW motor.
* No gear changing required to cut metric & imperial threads.
* Fitted with Sino 2 axis digital readout, taper turning attachment & quickchange toolpost.