- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
LGF: GAMMA POWER 1000 (REPAIRED UNIT)
Excl. GST: $3,200.00
Incl. GST: $3,680.00
Incl. GST: $3,680.00
MITRE SAW: LGF PENTA MITRE
Excl. GST: $24,500.00
Incl. GST: $28,175.00
Incl. GST: $28,175.00
AUTO CUT SAW: LGF OLIMPYA
Excl. GST: $28,000.00
Incl. GST: $32,200.00
* This LGF automatic cut off saw offers the utmost in cutting safety and speed.
* Fitted with auto pneumatic clamping and mist spray unit for a clean cutting cycle.
* Head can be tilted to -45° / 90° / 45° by switch.
* Possibility of performing all angles from 30° left to 30° right.
* Fully enclosed working area.
* Can be fitted with blades from Ø 500mm – Ø 550mm.
| Weight | 500 kg |
|---|---|
| Dimensions | 1.9 × 1 × 1.1 cm |
Related products
TWIN HEAD SAW: MERRIT CHINA
SKU:
ALU100126
PORTABLE SAW: LGF ARES
SKU:
ALU301000
MITRE SAW; QCS-400 UP CUTTING
SKU:
ALU301040
MITRE SAW: LGF FRIDA 400MM Blade Manual Down
SKU:
ALU301100
* High quality Italian machine.
* Cutting off with manual downstroke of the blade.
* Rotating table between 80° and -80°, easy setting to any angle.
* Tilting head from 45° to -45° using mechanical blocking system.
* Horizontal pneumatic clamping system with rubber pads.
* Spray mist lubrication.
* Air filter and air gun.
CUT OFF SAW: LGF ASTRA AUTO UP CUT
SKU:
ALU301200
* High quality Italian machine.
* Rising blade with an easy and light manual lever action.
* Rotating working bench, mechanical locking devices at 90°/45°/-45°.
* Tilting blade can cut at any angle between 80° and -80°, by means of mechanical stop on the rotating bench.
* Can perform ripping operations from 0 to 60 mm by means of rear movable fence.
* Full safety guarding around the work table.
* Vertical pneumatic clamping system with rubber pads.
* Spray mist lubrication.
* Air filter and air gun.
V NOTCHER: LGF BIFRA
SKU:
ALU301250
* High quality Italian machine.
* Unique two blade design V-notching machine.
* Automatic downfeed of the saw carriage.
* Pneumatic adjustment of the saw blade feeding.
* Hand wheel operated work bench with depth stop.
* Full protection of the working area with automatically closing hoods.
* Vertical pneumatic clamping system with rubber pads.
DOUBLE MITRE SAW: LGF ZETA
SKU:
ALU302000
* This LGF ZETA double mitre saw combination is ideal for the fabrication of aluminium joinery.
* Both saw heads are capable of compound mitres.
* Each table has horizontal air clamping.
* Central controls make the pneumatic cutting action simple and hands free.
* Equipped with auto lubrication for smooth cutting and clean finish.
* Comes with central workpiece support.
DOUBLE MITRE SAW: LGF DELTA
SKU:
ALU302100
* This LGF Delta double mitre saw combination is ideal for the fabrication of aluminium joinery.
* Both saw heads are capable of compound mitres.
* Each table has horizontal air clamping.
* Equipped with electronic positioner with up to 99 memory allocations.
* With monochrome screen and industrial integrated keyboard.
* Automatic electronic movement of the right head.
* Pneumatic tilting heads from 90° to +45°.
* USB port to save/upload cutting lists and programmes.
* Full protection of the saw blades with automatically closing hoods.
* Horizontal pneumatic clamping system with rubber pads.
* Automatic nebulizer lubrication.