- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
Back to products
DRILL: GEARED HEAD Z5050 MT4
$9,999.00
Back in Stock Soon
DRILL: GEARED HEAD Z5032 MT4. 420 V Three Phase.
$4,116.00
* Geared head MT4 drill.
* Depth gauge.
* Electro-magnetic feed.
* Rise and fall table with 360° rotation and +/- 90° tilt.
* Fitted with tapping switch.
* Comes with machine light and emergency switch.
| Weight | 350 kg |
|---|---|
| Dimensions | 0.23 × 0.76 × 0.57 cm |
Description
| Drill Capacity (mm) | 40 |
|---|---|
| Tapping Capacity (mm) | M16 |
| Table Size (mm) | 500 x 460 |
| Nose to Table | 720 |
| Spindle Taper | MT 4 |
| Speeds (no.) | 12 |
| Speed Range (rpm) | 75 – 3200 |
| Quill Stroke (mm) | 180 |
| Quill Diameter (mm) | 75 |
| Column Diameter (mm) | 115 |
| Motor (kW) | 1.5 |
| Voltage (V) | 415 |
| Weight Nett / Gross (kg) | 310 / 350 |
| Volume (m³) | 0.9966 |
| Packing Size L x W x H (mm) | 570 x 760 x 2,300mm |
Shipping & Delivery
Related products
DRILL: GEARED HEAD GHD-T25A 3PH
SKU:
DMC348942
DRILL: GEARED HEAD ZX40H MT4 3PH 12 SPEED
SKU:
DMC359075
DRILL: GEARED HEAD WDM30B MT4 1PH
SKU:
DMC359080
DRILL: GEARED HEAD JZB5032 MT4 1 PH
SKU:
DMC359081
DRILL: GEARED HEAD ZS-40APS AUTO 3PH
SKU:
DMC359152
DRILL: GEARED HEAD Z5028 MT3 3 PHASE 400V
SKU:
DMC359170
DRILL: GEARED HEAD Z5040E MT4
SKU:
DMC359180
* Heavy duty drilling machine for industrial use.
* Equipped with power feed on the quill with 2 feed rates.
* Automatic drift release.
* Feed is controlled by electromagnetic clutch.
* Rise and fall table with 360° rotation and +/- 90° tilt.
* Fitted with tapping switch.
* The electrical system has a short circuit and overload protection.
DRILL: GEARED HEAD Z5050 MT4
SKU:
DMC359195
* Heavy duty drilling machine for industrial use.
* Equipped with power feed on the quill with 3 feed rates.
* Feed is controlled by electromagnetic clutch.
* Large rise and fall table with 360° rotation and +/- 90° tilt.
* Fitted with tapping switch.
* The electrical system has a short circuit and overload protection according to CE standard.