- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
CNC LATHE: RICHYOUNG RIC-TC200 TWIN SPINDLE
$0.00
Conversational Programming Fully Inclosed Guarding
| Weight | 5050 kg |
|---|---|
| Dimensions | 3.24 × 1.6 × 1.74 cm |
Description
| SWING OVER BED | 480mm |
|---|---|
| MAXIMUM TURNING DIAMETER | 280mm |
| DISTANCE BETWEEN CENTRES | 455mm |
| SPEEDS | 4200rpm |
| SPINDLE BORE | 61.0MM |
| SPINDLE NOSE | A2-6 |
| HYDRAULIC CHUCK | 210mm |
| Z TRAVEL | 439mm |
| X TRAVEL | 165mm |
| TOOL POST | Hyd LS-160A 8 Tool Direct Drive |
| SPINDLE MOTOR | 9/11kw Opt |
| HYDRAULIC PUMP | 1.5kw |
| TAILSTOCK | MT4 |
| TAILSTOCK TRAVEL | 380mm |
| CONTROLLER | FAGOR, SEIMEMS FANUC. |
| WEIGHT NETT/GROSS | 4500/5050kg |
| VOLUME | 9.0202 |
| FLOOR SPACE | L3240 X W1600 X H1740mm |
Shipping & Delivery
Related products
CNC LATHE: RICHYOUNG RIC-TC1640N TEACH
SKU:
LCN260100
CNC LATHE: RICHYOUNG RIC-TC1800 TEACH
SKU:
LCN2601010
CNC LATHE: RICHYOUNG RIC-TC2560 TEACH
SKU:
LCN2601020
CNC LATHE: RICHYOUNG RIC-TC35160 TEACH
SKU:
LCN2601050
CNC LATHE: RICHYOUNG RIC-TC33120 TEACH
SKU:
LCN300644
CNC LATHE: JAGUAR 2060ENC
SKU:
LCN301070
* This 2060ENC teach lathe is of rigid construction with hardened & ground beds over HRC 50 * The main spindle is supported by selected and preloaded super precision bearings to ensure high accuracy through full speed range * The main spindle shafts & gears are made from high grade alloy steel which are hardened and precision ground * Automatic lubrication pump provides all slide-ways and two axes ballscrews continuous lubrication at all times * The Fagor 8055TC is user friendly and comes complete with digital SERCOS AC servo system * Features 11 colour monitor * Comes with 8 station turret.
CNC LATHE: JAGUAR 2080ENC
SKU:
LCN301100
* This Jaguar model teach lathe comes with Fagor 8040TC controller for CNC functions but simple to use * Spindle is supported by selected and preloaded super precision bearings to ensure high accuracy through the full speed range * The main spindle shaft and gears in the headstock are made from high grade alloy steel hardened and precision ground for high speed running and lower noise level * The automatic lubrication pump on the apron provides all slideways and two axes ballscrews lubrication continually * Comes with full length rear splash guard *
CNC LATHE: BEMATO BMT-660X1500
SKU:
LCN301150
Fagor 8055TC control LCD monitor. *Over head control console travels with sliding door. *One piece cast base made of high tensile cast iron.* 3 V bed ways hardened and ground for higher rigidity. *Z axis travel matches with centre distance. *Heavy duty tailstock with 2 steps feed. Headstock gears are molybdenum steel SCm21 hardened and precision ground for smooth running. *X & Z axis ball screws are C5 grade. *Repeatability accuracy +/-0.005mm. *Positioning accuracy +/-0.01mm. * Constant surface speed. *Automatic home searching