- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
MITRE SAW; QCS-400 UP CUTTING
$5,500.00
* Suitable for cutting aluminum and alloy.
* Head can be swiveled +/- 45°.
* Pneumatic cylinder for controlled descent.
* Pneumatic clamps.
* Rotating tyable.
* Fully enclosed cutting area.
* Dust extraction chute.
| Weight | 130 kg |
|---|---|
| Dimensions | 0.8 × 0.6 × 1.27 cm |
Description
| BRAND | TTMC QCS-400 |
|---|---|
| TYPE | Up Cutting Saw |
| BLADE SPEED | 2800rpm |
| CLAMPING | Pneumatic Vertical Clamping |
| MOTOR | 1.1 Kw |
| VOLTAGE | 3 Phase |
| CUTTING CAPACITY 90° | Round: 105mm Square: 100mm Rectangle: 200 x 80 |
| CUTTING CAPACITY 45° | Round: 105mm Square: 80mm |
| OTHER | Rectangle: 200 x 80 |
| WEIGHT NETT / GROSS | 100/ 130kg |
| VOLUME | 0.6096cm |
| PACKING SIZE L X W X H | L800 x 600 x 1270mm |
Shipping & Delivery
Related products
PORTABLE SAW: LGF ARES
SKU:
ALU301000
MITRE SAW: LGF FRIDA 400MM Blade Manual Down
SKU:
ALU301100
* High quality Italian machine.
* Cutting off with manual downstroke of the blade.
* Rotating table between 80° and -80°, easy setting to any angle.
* Tilting head from 45° to -45° using mechanical blocking system.
* Horizontal pneumatic clamping system with rubber pads.
* Spray mist lubrication.
* Air filter and air gun.
CUT OFF SAW: LGF ASTRA AUTO UP CUT
SKU:
ALU301200
* High quality Italian machine.
* Rising blade with an easy and light manual lever action.
* Rotating working bench, mechanical locking devices at 90°/45°/-45°.
* Tilting blade can cut at any angle between 80° and -80°, by means of mechanical stop on the rotating bench.
* Can perform ripping operations from 0 to 60 mm by means of rear movable fence.
* Full safety guarding around the work table.
* Vertical pneumatic clamping system with rubber pads.
* Spray mist lubrication.
* Air filter and air gun.
MITRE SAW: LGF PENTA MITRE
SKU:
ALU301350
* High quality Italian machine.
* Rising blade with adjustable feeding.
* Rotating working bench, mechanical locking devices at 90°/45°/-45°, and pneumatic brakes for intermediate degrees.
* Tilting blade can cut at any angle between 80° and -80°.
* Digital display shows the intermediate degree cuts.
* Complete with trimming fence for performing trim cuts.
* Full safety guarding around the work table.
* Horizontal pneumatic clamping system with rubber pads.
* Can be fitted with blades from Ø 500mm - Ø 530m.
* Spray mist lubrication.
DOUBLE MITRE SAW: LGF ZETA
SKU:
ALU302000
* This LGF ZETA double mitre saw combination is ideal for the fabrication of aluminium joinery.
* Both saw heads are capable of compound mitres.
* Each table has horizontal air clamping.
* Central controls make the pneumatic cutting action simple and hands free.
* Equipped with auto lubrication for smooth cutting and clean finish.
* Comes with central workpiece support.
TWIN HEAD SAW:GAMMA SWING DIG
SKU:
ALU302200
* Equipped with electronic positioner.
* With 10” colour screen and touchscreen system.
* Radial sliding of the saw carriage.
* Pneumatic tilting heads from 90° to 45°.
* USB port to save/upload cutting lists and programmes.
* Available in 4mt or 5mt bed length.
* Can be fitted with a 500mm, 530mm or 550mm blade.
* Full protection of the saw blades with automatically closing hoods.
* Horizontal pneumatic clamping system with rubber pads.
* Automatic nebulizer lubrication.
LGF: GAMMA SWING DIGIT PLUS
SKU:
ALU302210
* Equipped with electronic positioner.
* With 10” colour screen and touchscreen system.
* Radial sliding of the saw carriage.
* Pneumatic tilting heads from 90° to +45°.
* USB port to save/upload cutting lists and programmes.
* Available in 4mt or 5mt bed length.
* Available with a 500mm, 530mm or 550mm blade.
* Full protection of the saw blades with automatically closing hoods.
* Horizontal pneumatic clamping system with rubber pads.
* Automatic nebulizer lubrication.
MITRE SAW; SHCS500 UP CUTTING
SKU:
ALU305000