- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
WELDING POSITIONER: 400MM TABLE V/SPEED
$1,900.00
– 240V Welding positioner
– Can be titled from 0-90 degrees
– Foot Pedal for convenient operation
– Takes a 300/400mm chuck
– Compatible with the KD series chucks.
– Variable speed controller allows you to dial in the right speed.
– Responds quickly, starts and stops very smoothly
– Suitable for Welding, Cutting, Grinding, Polishing, Finishing, Painting, Assembly, Dissemble, Shot Blasting, Runner Riser Cutting, Machining etc
| Weight | 60 kg |
|---|---|
| Dimensions | 1.85 × 0.4 × 0.51 cm |
In stock
Description
| DESCRIPTION | Welding Positioner |
|---|---|
| MODEL NUMBER | BWJ-1 (45 Hole) |
| TABLE DIAMETER | 400mm |
| HORIZONTAL CAPACITY | 100kg |
| VERTICLE CAPACITY | 50kg |
| ROTATIONAL SPEED | 0.05 – 0.5rpm |
| TILT ANGLE | 0 – 90deg (Manual) |
| HEIGHT OF TABLE | 500mm |
| TABLE HOLE | 45.0mm |
| MOTOR POWER | 120w 230V 1 Phase 50hz |
| CHUCK OPTIONS | KD-300/400 |
| WEIGHT NETT/GROSS | 65/60Kgs |
| VOLUME | 0.3774cm |
| PACKING SIZE (L X W x H) | 1850 x 400 x 510mm |
Shipping & Delivery
Related products
WELDING POSITIONER: 1600MM TABLE V/SPEED H/DUTY
SKU:
WER1000638
- 3 Phase Welding positioner
- Can be titled from 0-90 degrees
- Foot Pedal for convenient operation
- Comes with a remote with controls.
- Compatible with the KD series chucks.
- Variable speed controller allows you to dial in the right speed.
- Responds quickly, starts and stops very smoothly
- Suitable for Welding, Cutting, Grinding, Polishing, Finishing, Painting, Assembly, Dissemble, Shot Blasting, Runner Riser Cutting, Machining etc
WELDING POSITIONER: 2000MM TABLE V/SPEED H/DUTY
SKU:
WER1000642
- 3 Phase Welding positioner
- Can be titled from 0-90 degrees
- Foot Pedal for convenient operation
- Comes with a remote with controls.
- Compatible with the KD series chucks.
- Variable speed controller allows you to dial in the right speed.
- Responds quickly, starts and stops very smoothly
- Suitable for Welding, Cutting, Grinding, Polishing, Finishing, Painting, Assembly, Dissemble, Shot Blasting, Runner Riser Cutting, Machining etc
WELDING POSITIONER: 2000MM TABLE V/SPEED H/DUTY
SKU:
WER1000646
- 3 Phase Welding positioner
- Can be titled from 0-90 degrees
- Foot Pedal for convenient operation
- Comes with a remote with controls.
- Compatible with the KD series chucks.
- Variable speed controller allows you to dial in the right speed.
- Responds quickly, starts and stops very smoothly
- Suitable for Welding, Cutting, Grinding, Polishing, Finishing, Painting, Assembly, Dissemble, Shot Blasting, Runner Riser Cutting, Machining etc
WELDING CHUCK: 500MM SELF CENTERING
SKU:
WER1000712
WELDING COLUMN & BOOM: CZJZ STATIONARY 2000 X 6000MM
SKU:
WER1000860
* Welding Column & Boom ( Manual Rotating) (Manual Traveling)
* Including: Column, Boom, Control box, Elevating mechanism, Rotating machanism
* Lifting guide bracket, Welding machine holding seat, Hand pendant control.
* Effective verticle stroke = 3 metres
* Effective horizontal stroke = 3 metres
* Boom loading at extremity = 300kg
* Manual rotating +/- 180deg ( including welding machine platform )
* Extending speed + VDF 100-1000m/min
* Verticle lifting speed - 1000m/min
WELDING COLUMN & BOOM: STATIONARY 1000 X 1000MM
SKU:
WER1000890
* Welding Column & Boom with manual swivel base
* Including: Column, Boom, Control box
* Effective verticle stroke = 1 metres
* Effective horizontal stroke = 1 metres
* Manual rise and fall by handle on top of column
* Boom loading at extremity = 300kg
* Extending speed + VDF 100-1000m/min
* Welding machines not included
WELDING ROTATOR SET 30 TON: WORM SHAFT
SKU:
WER1003008