- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
CRC: 556 LUBRICANT 420ML LOW ODOUR
$9.00
* CRC 5.56 is a multi purpose lubricant with low odours if it is a concern in confind spaces *
| Weight | 0.405 kg |
|---|---|
| Dimensions | 0.065 × 0.065 × 0.21 cm |
In stock
SKU:
LUB424491
Category: Lube Protector
Description
| TYPE | Lubricant 5.56 Low Odour |
|---|---|
| BRAND | CRC |
| USES | Normal 556 but Low Odour |
| PACKING | Aerosol |
| CONTENTS | 420 ML |
| WEIGHT NETT/GROSS | 0.405/0.415Kg |
| VOLUME | 0.0009cm |
Shipping & Delivery
Related products
CRC: 556 ELECTRICAL PROTECTION
SKU:
LUB424490
$14.00
* This CRC 5566 is suitable for electrical protection * It is a plastic base lubricant that will penertrate corosion inhibitor that helps to prevent electrical malfuction caused by water penertration, humidity, condensation or corrosion. * Non flamable and silicone free. * Comes in 420ml aerosol can *
CRC: 556 INDUSTRIAL LUBRICANT 300G
SKU:
LUB424492
$9.95
CRC: SILICON SPRAY: 808 500ML
SKU:
LUB424498
$14.80
* Automotive: CRC 808 Silicone lubricates door locks, hinges, linkages, window guides and bushes. It preserves and protects rubber mouldings, weather strips, grommets, o-rings, rubber seals, dashboards, door mouldings, plastic parts and mountings. It also restores tyre appearance and prevents bug accumulations on bumpers and grilles, where more specialised solvent based restorers are unsuitable. Refreshes the colour of most plastic and rubber components. Waterproofs ignition systems *
CRC: LONG LIFE ANTI RUST 300GM
SKU:
LUB425542
$16.50
SUPERON: FLAWCHECK PENETRANT
SKU:
LUB426692
$12.95
* Superon " Flawcheck" will locate surface discontinuities or other indications on all non-porousmaterials (metals, plastics, ceramics etc ) include: Cracks, Seams, Porosity< Laps, Laminations, Cold Shuts
* Used to detect welding, casting and forging defects, cracks and leaks in new components and fatigue on/in service components
* Will deterct a wide spectrum of flaw sizes regardless of flaw orientation, up to 1 micron to 30 micron depth on standard NI-Cr test panel
* Superior caplary action, Non-toxic, Non-corrosive, Free from halides & sulfides
SUPERON: ULTRA BRIGHT ZINK SPRAY 400GM
SKU:
LUB426696
$14.95
Product Description
* Superon Bright Zinc Spray is a quick drying, light-duty,
sacrificial coating that protects ferrous metals from oxidizing
* It Provides barrier as well higher degree of cathodic protection to the base metal against the
environment .and prevent the formation or spreading of rust and corrosion
* Also provides the appearance of a high shine, hot-dip galvanized, bright metallic
finish
* Stanvac Ultra Bright Zinc Spray is excellent for touch-ups to scratches,
dents, welds, wear or machined edges on galvanised, aluminum and other high
shine metal substrates.
Benefits:
� High Shine Finish. A glistening high shine coating with 65% zinc-Al in dry
film. Provides the appearance of a hot-dip galvanized, bright metallic finish.
� Sacrificial Zinc Coating. Stops rust & corrosion on steel structures, equal to
Hot dipped galvanizing.
� Quick Drying. Dries to touch in 15 to 30 minutes. Allows treated parts to be
handled quickly.
� Resistant to salt spray and weathering. Good film integrity after 250hrs SST.
� Restores bright look of hot dipped galvanizing on damaged
surfaces.
� Excellent heat resistance in class.
