- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
LATHE: L-330A 300 X 910 X 38MM BORE, 1 PHASE
$0.00
* Enclosed oil bath headstock.
* Quick change feed gearbox for easy feed speed selection.
* Precision V bed hardened & ground.
* Change gears for metric and imperial thread cutting.
* D1-4 camlock spindle for quick chuck changes & safe reverse turning.
* Removable gap for larger diameter jobs.
| Weight | 450 kg |
|---|
Description
| Swing Over Bed (mm) | 300 |
|---|---|
| Swing Over X-slide (mm) | 180 |
| Swing Over Gap (mm) | 430 |
| Between Centres (mm) | 910 |
| Spindle Nose | D1-4 |
| Speeds (no.) | 18 |
| Speed Range (rpm) | 65 – 1,810 |
| Spindle Bore (mm) | 38 |
| Spindle Taper | MT5 |
| Metric Threading (M) | 0.4 – 7.0 |
| Imperial Threading (tpi) | 4 – 60 |
| Tailstock Taper | MT3 |
| Tool Height (mm) | 12 |
| Motor (kW) | 1.5 |
| Voltage (V) | 230 |
| Weight Nett / Gross (kg) | 360 / 450 |
| Volume | |
| Packing Size L x W x H (mm) |
Shipping & Delivery
Related products
LATHE: JESSEY STUDTURN 360 X 750MM (TAIWAN)
SKU:
L--110140
* Rigid construction beds are induction hardened and precision ground.
* Harden and ground spindle & gears in headstock for high speed running with low noise.
* Optional two-speed motor with 16 speeds, 35 - 2000rpm.
* Optional variable speed motor, 35 - 2500rpm.
* Smooth, easy speed change selection.
* Feed rod fitted with an overload clutch for safety.
* Comprehensive range of metric, imperial, diametral & modular threads.
* Fitted with 2 axis digital readout & quickchange toolpost.
* Made in Taiwan.
LATHE: JESSEY STUDTURN 360 X 1000MM (TAIWAN)
SKU:
L--110142
* Rigid construction beds are induction hardened and precision ground.
* Harden and ground spindle & gears in headstock for high speed running with low noise.
* Optional two-speed motor with 16 speeds, 35 - 2000rpm.
* Optional variable speed motor, 35 - 2500rpm.
* Smooth, easy speed change selection.
* Feed rod fitted with an overload clutch for safety.
* Comprehensive range of metric, imperial, diametral & modular threads.
* Fitted with 2 axis digital readout & quickchange toolpost.
* Made in Taiwan.
LATHE: WM-330B 330 X 1000 X 51MM BORE, 3 PHASE
SKU:
L--120001
* The WM-330B lathe is fitted with D1-5 spindle with a 51.0mm spindle bore.
* Comes with gap bed for those larger diameter workpieces.
* Automatic feed and thrading are fully interlocked.
* Inductioned hardened and precision ground V bedway.
* Hardened and precision ground headstock gears.
* Fitted with independent leadscrew and feed shaft
LATHE: WM330 330 X 750 X 38MM 1 PHASE
SKU:
L--120467
* Precision ground and supersonic frequency hardened bedways.
* The spindle is supported with precision roller bearings.
* Head stock gears are made of high quality steel ground and hardened.
* Sealed and easy operating feed box has various feeds and thread cutting functions.
* ASA D1-4 camlock spindle nose.
* Machine is fitted with foot brake & work lamp for extra safety.
* Short bed length and space saving for training institutions.
* Fitted with safety chuck guard.
LATHE: BL-336D 300 X 900 X 38MM BORE DRO, 1 PHASE
SKU:
L--120513
* Induction hardened & precision ground V-way beds.
* D1-4 Spindle is supported by high quality taper rolling bearing
* Automatic feed and threading are fully interlocked.
* Coolant pump & tank system.
* Fitted with a work lamp & foot brake for added safety.
* Quickchange toolpost for speedy tool changing.
* Gap bed for larger diameter work pieces.
* Independent leadscrew & feed rod.
* Carriage mounted spindle control lever.
* Tailstock can be offset for turning tapers.
LATHE: EL300 300 X 750 X 38MM BORE ELOTRONIC 1PH V/S
SKU:
L--120520
* Induction hardened & precision ground V-way beds.
* Spindle supported by high quality taper roller bearings
* Large range of speeds and dial up thread cutting options
* Quickchange toolpost for speedy tool changing
* Confrol screen with fully fuctioning to drive this lathe
* Can be used as manual lathe or auto threading
Special roller stand with leveling screws & locking screws
LATHE: WM-180V 180 X 300 X 21MM BORE V/SPEED 1 PHASE
SKU:
L--165180
* Compact lathe with variable speed control.
* Easy to read digital readout speed display.
* Induction hardened & precision ground bedways.
* Forward/reverse & emergency stop switches.
* Tailstock can be offset for turning tapers.
* Transparent toolpost guard.
* Spindle supported by high precision bearings.
* Adjustable slideway gibs.
* Ideal for hobbyists and small workshops.
* Stand is sold seperately.
LATHE: SHOPTURN-280G 280 X 650 X 26MM BORE G/HEAD 1 PHASE
SKU:
L--165278
* Compact lgeared Head Lathe with 12 speed precision ground gears
* Induction hardened & precision ground bedways.
* Headstock is gear driven in oil bath.
* Forward/reverse & emergency stop switches.
* Tailstock can be offset for turning tapers.
* Covered leadscrews & limit switches for safety.
* Metric & imperial threading dial indicator.
* Extra wide bedway for more capacity.
* Ideal for hobbyists and small workshops.
* Stand is sold seperately.