- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
PARTING INSERT (GCMX) 3MM PH5135 (PALBIT) (GTN-3)
Excl. GST: $15.50
Incl. GST: $17.83
Incl. GST: $17.83
PARTING INSERT (GCMX) 5MM PH5135 (PALBIT) (GTN-5)
Excl. GST: $15.50
Incl. GST: $17.83
Incl. GST: $17.83
Back in Stock Soon
PARTING INSERT (GCMX) 4MM PH5135 (PALBIT) (GTN-4)
Excl. GST: $15.50
Incl. GST: $17.83
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance
* The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear
* Techical Features (PHG) for high wear resistance and long life
| Weight | 0.001 kg |
|---|---|
| Dimensions | 0.1 × 0.03 × 0.03 cm |
Description
| BRAND | PALBIT (EUROPE) SINCE 100YEARS |
|---|---|
| MODEL | GCMX-4N |
| SIZE | W =4,1 B = 3,5 Re = 0,25 |
| BEST FOR | Parting and Grooving |
| SUIT TO | LTP820006 |
| COATINGS | TOP COATING (TIN) CVD- ALUMINA COATING |
| HEAT- RESISTANT SUBSTRADE | The cemented-carbide substrate adds high strength for application with focus on high material rmoval |
| APPLICATION | Wet and Dry Machining, External & Internal Turning. Roughing to finishing. |
| WEIGHT NETT/GROSS | 0.0010kg |
| VOLUME | 0.0001cm |
Shipping & Delivery
Related products
PRG 2MM N TPC35 PARTING
SKU:
LTT500268
PRG 4MM N TN6030 PARTING
SKU:
LTT500285
MRCN 22TIN32 2.2 PARTING INSERTS
SKU:
LTT800798
MRCN 40T TIN32 4.0MM PARTING INSERTS
SKU:
LTT800802
GTN2 NCIH 2.0MM PARTING INSERT CHANGED LTP700360
SKU:
LTT800804
MRCR 40TL40 4.0MM PARTING & GROOVING INSERTS
SKU:
LTT800807
TSJ 2-6R TT8020 TAEGUTEC PARTING & GROOVING
SKU:
LTT801039
PARTING INSERT 4MM PH5135 (PALBIT)
SKU:
LTT944446
* Excellent chip control even when machining with a small depth of cut
* Suitable for machining with a variable depth of cut.Proper rake angle of cutting surface finish and low cutting resistance
* The MT-TiCN inner Coated is hard and wear-resisant against abrasive wear
* Techical Features (PHG) for high wear resistance and long life