- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
TOGGLE CLAMP: GH-301-A HORZ PUSH TYPE
$18.00
* The GH-301A clamp is suitable for light duty operations
* Each clamp is supplied with pressed steel base
* Close tolerances between the base and plunger allow these clamps to be used for pin locating gauges as well as clamping devices
* Plunger locks in extended or retracted position
* These clamps are supplied with adjustable end screw for fine adjustment
* The GH-301A clamp is supplied with red vinyl hand grip
* Holding capacity is 45kg
* Stroke is 18.0mm with handle locking in horizontal position
* This is a small clamp o/a length is 65.0mm with three hole mounting base
| Weight | 0.48 kg |
|---|---|
| Dimensions | 0.1 × 0.04 × 0.04 cm |
In stock
Description
| DESCRIPTION | Toggle Clamp |
|---|---|
| MODEL | GH-301-A |
| TYPE | Push/Pull |
| LENGTH OF STROKE | 18.0mm |
| LENGTH O/A | 65.0mm |
| BASE MOUNTING | 3 Screw holes |
| CLAMPING FORCE | 45Kg |
| WEIGHT NETT/GROSS | 0.046/0.048kg |
| VOLUME | 0.0002cm |
| BASE MEASUREMENT | L33.0mm x W27.0mm |
| BASE HOLE MEASUREMENTS | L16.0mm Centres W17.0mm Centres |
| BASE TO RAM | 11.0mm |
Shipping & Delivery
Related products
TOGGLE CLAMP: GH-101ES VERT
SKU:
TC-200120
TOGGLE CLAMP: GH-201-C HORZ
SKU:
TC-200390
TOGGLE CLAMP: GH-303-E HORZ PUSH TYPE
SKU:
TC-200600
* * The GH-303E clamp is suitable for light medium or heavy duty operations
* Each clamp is supplied with a pressed steel base
* Close tolerances between the base and plunger allow these clamps to be used for pin locating gauges as well as clamping devices
* These clamps are supplied with adjustable end screw for fine adjustment
* The GH-303E clamp is supplied with red vinyl hand grip
* Holding capacity is 454kg
* Stroke is 25.0mm with handle locking in a 45deg position
T
TOGGLE CLAMP: GH-305-E HORZ PUSH TYPE
SKU:
TC-200680
** The GH-305E clamp is suitable for light medium or heavy duty operations
* Each clamp is supplied with a ductile iron base, precision machined for flatness
* Close tolerances between the base and plunger allow these clamps to be used for pin locating gauges as well as clamping devices
* Plunger locks in extended or retracted position
* These clamps are supplied with adjustable end screw for fine adjustment
* The GH-305E clamp is supplied with red vinyl hand grip
* Holding capacity is 386kg
* Stroke is 36.0mm with handle locking in verticle position
TOGGLE CLAMP: GH-202-F HORZ SIDE MOUNT
SKU:
TC-200740
HARSP: GH-451-SS-LP STAINLESS STEEL
SKU:
TC-200984
SPINDLE: M10 X L90.0MM
SKU:
TC-201100
TOGGLE CLAMP: KL-12130 VERT
SKU:
TC-202100