Monograde lubricant for two stroke Diesel engines SPECIFICATIONS International specifications API CF-2/CF MIL.L. 46152B Meets the requirements of  Detroit Diesel : Oil typ 1 and 2 for series : 53, 71, 92, 110 and 149 marine APPLICATIONS This lubricant is suitable for all two stroke Diesel engines when API CF-2 or API CD II specifications are required. TOTAL RUBIA CF-2 40 has been especially developed for the lubrication of two stroke Detroit Diesel engines. It also can be used in Diesel or gasoline engines of old vehicles. PERFORMANCES AND CUSTOMER BENEFITS  Good anti-wear and anti-corrosion properties  Excellent anti-oxidation properties allowing long time idle or very severe working conditions (hot climates, heavy load…)  Low ash value ensuring good engine cleanliness  Very high performance detergent and dispersant additives PHYSICAL AND CHEMICAL CHARACTERISTICS* TOTAL RUBIA CF-2 40 Method Value Kinematic Viscosity at 40°C mm2 /s ASTM D445 145.9 Kinematic Viscosity at 100°C mm2 /s ASTM D445 14.5 Viscosity Index - ASTM D2270 98 T.B.N mgKOH/g ASTM D2896 7.1 Pour Point °C ASTM D97 -15 Sulphated Ash % m/m ASTM D874 0.77

* Spirit WBF 7200 cutting oil has a recomended mix ratio of 33:1/20:1 * Suitable for stainless steel cutting

TITAN ATF D3 A multifunctional ATF for Passenger Cars and Commercial Vehicles requiring a Dexron® III specification TITAN ATF D3 is a Multifunctional Automatic Transmission Fluid, providing longer life and smoother gear shifts. Recommended for Passenger Cars and Commercial Vehicles requiring a Dexron® III specification. Automatic Transmission Fluid is specially formulated to conform to GM and Ford specifications. Supercedes Dexron®. Not suitable where Dexron VI is called for. Suitable for use for the following applications: ATF Dexron® III Ford MERCON® Allison C-4 Caterpillar TO-2.