- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
DRILL: GEARED HEAD Z5050 MT4
SKU:
DMC359195
* Heavy duty drilling machine for industrial use.
* Equipped with power feed on the quill with 3 feed rates.
* Feed is controlled by electromagnetic clutch.
* Large rise and fall table with 360° rotation and +/- 90° tilt.
* Fitted with tapping switch.
* The electrical system has a short circuit and overload protection according to CE standard.
DRILL GRINDER: DD750X (DRILL DOCTOR)
SKU:
DRG284260
* Drill Doctor - does the job !
* Compact little drill grinder that will sharpen a great range of bit sizes
* Sharpen High speed steel cobalt, TiN coated and carbide drill bits with the super-abrasive and long lasting diamond wheel
* Sharpen drill bit types: two flute fractional metric number & letter sizes
* Point styles: conventional split point masonary
* Change the point angle to suit your specific needs 90 - 135 deg
DIAMOND WHEEL FOR DRILL DOCTOR 750X
SKU:
DRG284280
DRILL GRINDER: SM-1200 1PH
SKU:
DRG284720
MAG/DRILL: MACKMA M30- 30MM CAPACITY
SKU:
DSM360190
MAG/DRILL: MACKMA M32X- 32MM CAPACITY
SKU:
DSM360200
MAG/DRILL: MACKMA M50RLX- 50MM CAPACITY
SKU:
DSM360220
M50 RLX magnetic drilling machine, versatile in a compact form. The exchangeable MT 2 makes this magnetic drilling machine all all- round machine for drilling purposes. The variable speed and right / left option enable this magnetic drilling machine to also be used for tapping / threading up to M16, reaming and countersinking. This machine is supplied as standard with auto coolant system cleverly placed on top of the machine. The magnetic drilling machine is powered by a strong 1150 watts Eibenstock motor.
MAG/DRILL: EUROBOOR EBM-360 30MM BATTERY OPPERATED
SKU:
DSM360400
`* Euorboor EBM-360 Magnetic Drilling system with 37W battery able to cope with the heaviest of work.
* At 10.2kg including battery it is lightweight and compact
* Unlimited mobility with this drilling unit
* The battery delivers maximum power and runtime
* Fitted with permanent magnet for safe operation and suitable for thin material
* Comes with brushless motor which is more efficient and less downtime
* The drilling system features a complete coolant system and roller bearing arbor support
* EBM series is compatable with Makita platform so same batteries can be used
* Comes with 12 month warranty.
MAG/DRILL: EUROBOOR ECO-30-30MM CAPACITY
SKU:
DSM360402
* Euorbor ECO-30- Magnetic Drilling system with a 900W motor to cope with the heaviest of work.
* At 8.5kg it is extremely light & very compact.
* The drilling system features a complete coolant system and roller bearing arbor.
* Easily mounts twist drills up to 13mm diameter.
* The Euroboor ECO.30 is the lightest ø 30 mm machine in the market *
Due to its small size the Euroboor ECO.30 is the ideal magnetic core drilling machine to drill holes in tight and narrow spaces
* This machine measures barely 27.5 cm in length
* With a power of 900 W this small ECO.30 magnetic core drilling machine cuts holes in metal easily and quickly
* Comes with 12 month warranty.
MAG/DRILL: EUROBOOR ECO-TUBE 30 – 30MM CAPACITY
SKU:
DSM360403
* Euorbor ECO-TUBE 30- Magnetic Drilling system with a 900W motor to cope with the heaviest of work.
* No electricity required for magnetic base.
* Unique flexible features for pipes of various sizes.
* No special attachments needed to accommodate flat or curved surfaces.
* Highly stable wide stance.
* Two separate magnets allow the machine to swing away without losing position.
* Easy to handle.
* Direct spindle drive.
* Comes with 12 month warranty.
MAG/DRILL: EUROBOOR ECO-32-32MM CAPACITY
SKU:
DSM360404
* Euorboor ECO-32- Magnetic Drilling system with 1000W motor to cope with the heaviest of work.
* At 12.6kg it is lightweight and compact.
* The drilling system features a complete coolant system and roller bearing arbor support.
* Easily mounts weldon twist drills up to 13mm diameter and countersiks to 40mm
* This light and reliable machine is a true addition for every workplace
* Comes with 12 month warranty.
.
MAG/DRILL: EUROBOOR ECO-32-T V/SPEED
SKU:
DSM360406
* Euorbor ECO-32-T Magnetic Drilling & Tapping system with 1050w Reversing motor to cope with the heaviest of work
* At 12.6kg lightweight and compact
* The drilling & Tapping system features a complete coolant system and roller bearing arbor support to extend cutter life
* Suitable for core drills up to Ø 32 mm, Weldon spiral drills up to Ø 13 mm and countersinks up to Ø 40 mm
* Easily mounts 3 Jaw Drill Chuck.
* Magnetic Holding Deadlift: 2 200 lbs
* Magnet Dimensions: 170 X 85 X 48mm footprint
* Comes with 12 month warranty
MAG/DRILL: EUROBOOR ECO-36 LOW PROFILE 36MM CAPACITY
SKU:
DSM360408
* The Euroboor ECO.36+ magnetic core drilling machine is the lowest drilling machine in the market, measuring only 6 1/2” (165 mm) height
* This magnetic core drilling machine is perfect for drilling in spaces with limited heights such as H-beams, steel structures, plates, profiles, etc
* The portable ECO.36+ is equipped with a powerful magnet, user friendly Quick Connect cutter fitment system, and easy release / lock feed handle for both left and right operation
* The drilling system features a coolant system and roller bearing arbor support.
* Comes with a 12 month warranty
MAG/DRILL: EUROBOOR ECO-40S 40MM CAPCITY LIGHTWEIGHT
SKU:
DSM360409
* Euorboor ECO-40S Magnetic Drilling system with a powerful 1.15kW motor to cope with the heaviest of work.
* At 10.3kg it is the lightest machine on the market.
* High efficiency motor with less heath generation.
* High accuracy capstan hub.
* Direct spindle drive.
* Integrated tool cooling and lubrication.
* Strong dual coil CNC machined magnet.
* Comes with 12 month warranty.
MAG/DRILL: EUROBOOR ECO-40/2 40MM CAPCITY
SKU:
DSM360409A
MAG/DRILL: EUROBOOR ECO-50S 50MM CAPACITY
SKU:
DSM360410
* Euorboor ECO-50S Magnetic Drilling system with 1.25kW motor to cope with the heaviest of work.
* Lightweight and compact unit only 11.2 Kg.
* Morse Taper 3 Spindle.
* The drilling system features a complete coolant system and roller bearing arbor support.
* 2 Speed Integrated oil bath gearbox
* High precision slide & rail construction..
* Comes with 12 month warranty
MAG/DRILL: EUROBOOR ECO-50-T 50MM CAPACITY
SKU:
DSM360412
MAG/DRILL: EUROBOOR ECO-TUBE 55 – 55MM CAPACITY
SKU:
DSM360428
* Euorbor ECO-TUBE 55 Magnetic Drilling system with a 1.6kW motor to cope with the heaviest of work.
* No electricity required for magnetic base.
* Unique flexible features for pipes of various sizes.
* No special attachments needed to accommodate flat or curved surfaces.
* Highly stable wide stance.
* Two separate magnets allow the machine to swing away without losing position.
* Easy to handle.
* Direct spindle drive.
* Comes with 12 month warranty.
MAG/DRILL: EUROBOOR ECO-55-T 55MM CAPACITY
SKU:
DSM360430
* Euorboor ECO-55-T Magnetic Drilling system with 1.7kW motor to cope with the heaviest of work.
* The drilling system runs on high precision slide and rail construction with a complete coolant system and roller bearing arbor support.
* This model features LED load indicator with oil bath gearbox.
* Spindle is MT3.
* Comes with 12 month warranty.
MAG/DRILL: EUROBOOR ECO-55-TA 55MM CAPACITY
SKU:
DSM360432
* Euorbor ECO-55-A Magnetic Drilling system with 1.7kW motor to cope with the heaviest of work.
* The automatic drilling system runs on high precision slide and rail construction with a complete coolant system and roller bearing arbor support.
* This model features LED load indicator with oil bath gearbox.
* Spindle is MT3.
* Comes with 12 month warranty.
MAG/DRILL: EUROBOOR ECO-80/4 80MM CAPACITY
SKU:
DSM360433
* Euorbor ECO-80/4 Magnetic Drilling system with 1.8kW motor to cope with the heaviest of work.
* The automatic drilling system runs on high precision slide and rail construction with a complete coolant system and roller bearing arbor support.
* Very long stroke.
* Spindle is MT3.
* Comes with 12 month warranty.
MAG/DRILL: EUROBOOR ECO-100/4 100MM CAPACITY
SKU:
DSM360434
* Euorbor ECO 100/4 Magnetic Drilling system with 1.9kW motor to cope with the heaviest of work.
* The automatic drilling system runs on high precision slide and rail construction with a complete coolant system and roller bearing arbor support.
* This model features LED load indicator with oil bath gearbox
* Spindle is MT3.
* Comes with 12 month warranty
MAG/DRILL: EUROBOOR ECO-100/4D 100MM CAPACITY
SKU:
DSM360434A
* Euorbor ECO 100/4 Magnetic Drilling system with 1.9kW motor to cope with the heaviest of work.
* The automatic drilling system runs on high precision slide and rail construction with a complete coolant system and roller bearing arbor support.
* Rotating base allows for a wide range of drilling operations.
* This model features LED load indicator with oil bath gearbox.
* Spindle is MT3.
* Comes with 12 month warranty
MAG/DRILL: EUROBOOR ECO-200 -200MM CAPACITY
SKU:
DSM360434B
* Euorbor ECO 200 heavy duty magnetic drilling system with 3.6kW motor to cope with the heaviest of work.
* The automatic drilling system runs on high precision slide and rail construction with a complete coolant system and roller bearing arbor support.
* Integrated safety strap and lifting shackle
* Spindle is MT4.
* Comes with 12 month warranty
WELDON CHUCK ADAPTOR: 1/2″ X 20TPI
SKU:
DSM950160
EDM: TR100 TAP REMOVER
SKU:
EDM100030
* Light small portable compct design
* High speed & high efficiency and low cost
* Simple operation easy remove broken taps
* Dielectric - using ordinary tap water as a machine dielectric liquid
* Using any brass bar as electrode
* Removal of taps will not damage the threads
* Auto feed 30deg both left and right depth setting selectable arcing timer Auto retract Alarm messages Depth arrival over-tempreture *
EDM: CNC DNC42+DN40 SUPERDRILL
SKU:
EDM100140
* The Joemars DNC42 is specially designed for drilling hard materials such as hardened steel aaloys & tungston carbide in ranges of 0.2mm-3.0 mm
* This CNC EDM drill is a production drilling machine controlled by a Heidenhain controller
*The newly developed sparking cercuits are special to the DNC42 EDM super drills to enhance machine speed excellent flushing lower wear & higher accuracy*
EDM: JM325D SUPER DRILL
SKU:
EDM100150
* The Joemars JM325D is specially designed for drilling hard materials such as hardened steel alloys and tungstan carbide in ranges of 0.2mm - 3.0mm
* The newly developed sparking cercuits are special to the JM325D & JM528D EDM Super Drills to enhance machining speed excellent flushing lower wear & higher accuracy *
EDM: JM528D SUPER DRILL
SKU:
EDM100160
* The Joemars JM528D is specialy designed for drilling hard materials such as hardened steel alloys and tungstan carbide in ranges of 0.2mm - 3.0mm
* The newly developed sparking cercuits are special to the JM235D &JM528D Super Drills to enhance machining speed excellent flushing lower wear & higher accuracy *
EDM: JM325DZ SUPER DRILL
SKU:
EDM100170
* The Joemars JM325DZ is fitted with the Fuzzy Logic control system
* Easy to learn and operate - new operator can learn operation and be confident in only a few hours
* Includes 3 axis DRo system: X Y axis use linear scale Z axis uses encoder
* Five kinds of alarm indicators: will light up apon depth arrival Arcing Low Dielectric level For safety and on short electrode
* Anti hitting system for electrode
* Using 'MOSFET' sparking circuits suitable for tungsten carbide hardened steel etc
EDM: JM528DZ SUPER DRILL
SKU:
EDM100180
* The Joemars JM528DZ is fitted with the Fuzzy Logic control system
* Easy to learn and operate - new operator can learn the operation and be confident in only a few hours
* Includes 3 axis DRO system: X Y axis use linier scales Z axis uses encoder
* Five kinds of alarm indicators: will light up apon depth arrival arcing low dielectrics Anti hitting system for electrodes
* Using 'MOSFET' sparking circuits suitable for tungsten carbide hardened steel etc.
EDM: CNC DNC35 DRILLING
SKU:
EDM100200
* The Joemars CNC DNC35 Drilling EDM machine comes with arm type movable control panel design for operator comfort
* Stainless steel work table ensures stability
* Half submerged work table increases the performance of machining
* The Heidenhain TNC310 controller holds 100 sets of machining memories
* 6 Kinds of machining parameters
* Five kinds of alarm indicators
* RS-232-C/V.24 interface
* Plus many other fuctions *
EDM: CNC WT455 WIRE CUT
SKU:
EDM100220
EDM: CNC WT455S WIRE CUT
SKU:
EDM100230
EDM: CNC WT655 WIRE CUT
SKU:
EDM100240
EDM: CNC AWT555S WIRE CUT
SKU:
EDM100251
*Special upper / lower wire guide assembly, providing high-speed automatic wire threading in water and accuracy machining.
*Simple and reliable Automatic Threading Device, applies high precision accuracy and easy for operator's maintenance.
*Special anti-leaking system of low arm and work-tank, keeping axes movement smoothly.
*Special cooling system for low arm, providing high accuracy required while machining.
Hardened Stainless work-table enhances surface rigidity and well-support for work-piece.
FEATURES OF AUTOMATIC WIRE THREADING
A. Directly thread wire in submerged condition, saving the time and raising the working efficiency.
B. Wire threading at break point is achievable.
C. Upper water jet system achieves automatic wire threading with a thick workpiec
EDM: CNC JMNC2010+HD50
SKU:
EDM100280
EDM: JM32NZ COMPACT
SKU:
EDM100310
EDM: JM430+AZ50R+D430
SKU:
EDM100330
EDM: JM430+AZ75DR+D430
SKU:
EDM100332
GEAR: #6 VIKING KC-250 GRINDER
SKU:
GDW900010
WET/DRY GRINDER: GGM250W 1/4HP
SKU:
GDW900100
WET GRINDER: STONE VERT NTS-250 200W
SKU:
GDW900130
* The NTS-250 wet grinding machine can easily and quickly achieve perfect grinding results
* The universal support can be adjusted to allow for different jigs to be suspended on it's bars
* The carbarundum grinding wheel runs in a water bath which keeps the workpiece cool while grinding
* Idea for knife maker who requires low speed and can finish off with the leather burnishing wheel
WET GRINDER: STONE VERT NTS-250V 200W V/SPEED
SKU:
GDW900140
* The NTS-250 wet grinding machine can easily and quickly achieve perfect grinding results
* TThe universal support can be adjusted to allow for different jigs to be suspended on it's bars
* The carbarundum grinding wheel runs in a water bath which keeps the workpiece cool while grinding
* Idea for knife maker who requires low speed and can finish off with the leather burnishing wheel
WET GRINDER WHEEL ONLY: NTS-250 250 X 50 X 32MM BORE
SKU:
GDW900142
GRINDING WHEEL: 180 X 80 X 82.55MM
SKU:
GW-448160
DRESSING STICK: 25 X 25 X 150MM C245
SKU:
GWA470100
WHEEL DRESSER BLADE: GROZ WDC01 38MM
SKU:
GWA471167
HACKSAW: SAWKING KP-200 HYD.
SKU:
HS-303210
* Fully hydraulic system
* Infinitely variable saw feed presure control
* All electric components with motor protection
* Adjustable material stop length
* Clamping device for short ends
* Nesting fixture for multiple sawing of stacked bars small rounds and tubing
* Very rigid machine capable of accurate cutting over a long period
* Vice can be adjusted for angle cutting
HACKSAW: SAWKING KP-225 HYD.
SKU:
HS-303220
* Fully hydraulic system
* Infinitely variable saw feed presure control
* All electric components with motor protection
* Adjustable material stop length
* Clamping device for short ends
* Nesting fixture for multiple sawing of stacked bars small rounds and tubing
* Very rigid machine capable of accurate cutting over a long period
* Vice can be adjusted for angle cutting
HACKSAW: SAWKING KP-280 HYD.
SKU:
HS-303230
* Fully hydraulic system
* Infinitely variable saw feed presure control
* All electric components with motor protection
* Adjustable material stop length
* Clamping device for short ends
* Nesting fixture for multiple sawing of stacked bars small rounds and tubing
* Very rigid machine capable of accurate cutting over a long period
* Vice can be adjusted for angle cutting
HACKSAW: SAWKING KP-320 HYD.
SKU:
HS-303240
* Fully hydraulic system
* Infinitely variable saw feed presure control
* All electric components with motor protection
* Adjustable material stop length
* Clamping device for short ends
* Nesting fixture for multiple sawing of stacked bars small rounds and tubing
* Very rigid machine capable of accurate cutting over a long period
* Vice can be adjusted for angle cutting
HACKSAW: SAWKING KP-380 HYD.
SKU:
HS-303250
* Fully hydraulic system
* Infinitely variable saw feed presure control
* All electric components with motor protection
* Adjustable material stop length
* Clamping device for short ends
* Nesting fixture for multiple sawing of stacked bars small rounds and tubing
* Very rigid machine capable of accurate cutting over a long period
* Vice can be adjusted for angle cutting
HACKSAW: SAWKING KP-450 HYD.
SKU:
HS-303260
* Fully hydraulic system
* Infinitely variable saw feed presure control
* All electric components with motor protection
* Adjustable material stop length
* Clamping device for short ends
* Nesting fixture for multiple sawing of stacked bars small rounds and tubing
* Very rigid machine capable of accurate cutting over a long period
* Vice can be adjusted for angle cutting
POWERSAW BLADE: ULTRA-HARD 450 X 38 X 6TPI
SKU:
HSB310420
BLADE/SURFACE GRINDER WT624
SKU:
KG-357223
LATHE: GOSAN 1430 356 X 750MM TURNPOWER 1PHASE
SKU:
L--109141
* Gosan has been building lathes for over 35 years.
* Heavy duty geared head lathe.
* Hardened and ground gears.
* Hardened and ground bed-way.
* Open type chip tray can be pulled out easily to remove chip.
* Foot brake giving rapid braking.
* Emergency stop button equipped on the front of headstock.
* Jog button for easy gear engagement and inching spindle.
* Extra safety switch shuts down machine entirely for changing belt or gear for threading cutting.
LATHE: GOSAN 1440 356 X 1000MM TURNPOWER 3PH
SKU:
L--109142
* Gosan has been building lathes for over 35 years.
* Heavy duty geared head lathe.
* Hardened and ground gears.
* Hardened and ground bed-way.
* Open type chip tray can be pulled out easily to remove chip.
* Foot brake giving rapid braking.
* Emergency stop button equipped on the front of headstock.
* Jog button for easy gear engagement and inching spindle.
* Extra safety switch shuts down machine entirely for changing belt or gear for threading cutting.
LATHE: GOSAN 1440 356 X 1000MM 1PH VARIABLE SPEED
SKU:
L--109150
* Gosan has been building lathes for over 35 years.
* Heavy duty geared head lathe.
* Hardened and ground gears.
* Hardened and ground bed-way.
* Open type chip tray can be pulled out easily to remove chip.
* Foot brake giving rapid braking.
* Emergency stop button equipped on the front of headstock.
* Jog button for easy gear engagement and inching spindle.
* Extra safety switch shuts down machine entirely for changing belt or gear for threading cutting.