FORMER SET: 25.4MM OD TUBE
SKU:
PBT140101
FORMER SET: 31.8MM OD TUBE
SKU:
PBT140102
FORMER SET: 38.1MM OD
SKU:
PBT140103
FORMER SET: 50.8MM OD
SKU:
PBT140104
PIPE CUTTER: 3/8″ – 2″ MOTORISED 550W 1 PHASE PORTABLE
SKU:
PCC1002005
PIPE CUTTER: 2″- 12″ MOTORISED 1PH 750W SUNTECH
SKU:
PCC1002015
* This pipe cutting machine is suitable for cutting 2" to 12" steel pipe with a wall thickness of 10.0mm
* A 4" pipe can be cut in 60sec with no sparks dust or dangerous metal chips during the cutting opperation when using this special alloy blade
* Wheel carrier can be adjusted to suit pipe diameter
PIPE CUTTER: 2″- 12″ SUNTECH: STAND
SKU:
PCC1002016
* This pipe cutting machine is suitable for cutting 2" to 12" steel pipe with a wall thickness of 10.0mm
* A 4" pipe can be cut in 60sec with no sparks dust or dangerous metal chips during the cutting opperation when using this special alloy blade
* Wheel carrier can be adjusted to suit pipe diameter
PIPE CUTTER: 6″ – 16″ MOTORISED 1PH 230V SUNTECH
SKU:
PCC1002020
PIPE CUTTER: 8″ – 20″ MOTORISED 1100W 1PH 230V SUNTECH
SKU:
PCC1002030
ORBITAL PIPE CUTTER PSAF-8 120 -220MM RANGE
SKU:
PCC1002039
ORBITAL PIPE CUTTER PESF-4 19 -120MM RANGE
SKU:
PCC1002040
STAND: TO SUIT ORBITAL PIPE CUTTER PESF-4
SKU:
PCC1002041
SAW BLADE HSS FOR S.S. PIPE 68 X 1.8 X 16 X 72 TEETH
SKU:
PCC1002045
SAW BLADE HSS FOR S.S. PIPE 68 X 1.65 X 16 X 72 TEETH
SKU:
PCC1002046
BEVEL BLADE HSS FOR S.S. PIPE 65 X7 X 16 X 24 TEETH
SKU:
PCC1002047
PIPE STAND: 2″ – 12″ V HEAD ADJ HEIGHT 710 – 1320MM
SKU:
PCC1002050
PIPE STAND: 6″ – 16″ FLIP HEAD
SKU:
PCC1002052
PIPE STAND: 8″ – 20″ FLIP HEAD
SKU:
PCC1002054
ROLL GROOVING MACHINE: MANUAL 27 – 219mm CAPACITY SUNTECH
SKU:
PCC1002180
* Special hydraulic system for quick feeding, easy to operate, Different sizes of pinch rollers & combinations
* No need to change the pinch rollers when you need to groove different size pipes
* Just rotate the pinch roll Turret to acheive the replacement size.
* Lifting the mechanism with 4 wheel to make it mobile
ROLL GROOVING MACHINE: 2″-12″ CAPACITY SUN F/SWITCH
SKU:
PCC1002182
* Special hydraulic system for quick feeding, easy to operate
* Different sizes of pinch rollers & combinations
* No need to change the pinch rollers when you need to groove different size pipes
* Just rotate the pinch roll Turret to acheive the replacement size.
* Lifting the mechanism with 2 wheel to make it mobile
* Comes with foot switch for hands free opperation
* Supplied with adjustable height roller stand with 1/2" - 12" capacity
* Machine is Rothenberger style
ROLL GROOVING MACHINE: 1″-12″ CAPACITY T-QUE
SKU:
PCC1002200
* Special hydraulic system for quick feeding, easy to operate
* Different sizes of pinch rollers & combinations
* No need to change the pinch rollers when you need to groove different size pipes
* Just rotate the pinch roll Turret to acheive the replacement size.
* Lifting the mechanism with 4 wheel to make it mobile
ROTARY PIPE CUTTER: 20″ – 22″ MANUAL
SKU:
PIC600272
ROTARY PIPE CUTTER: 16″ – 18″ MANUAL
SKU:
PIC600273
PUNCH & SHEAR: BZ-45 45 TON BENZEL
SKU:
PNS160532
* The 45 ton is a special design to cater for all punching, shearing and cropping operations
* Ideal machine in any small workshop.
* Compact iron worker with vertical movement at all stations.
* Fast cylinder stroke improves efficiency.
* Italian pump and ALTOS valves.
* Benzel use the same size punch & dies as Sunrise
* The entire movement is straight up & down which allows the machine to be able to be used for pressing.
PUNCH & SHEAR: IW-100SH 100TON SUNRISE-HYD CLAMP
SKU:
PNS160669
* The double cylinder “S” series are in the Sunrise tradition of well engineered ironworkers built for high power, quality, and reliability.
* Standard with two foot control pedals, meaning separate operations can be safely performed simultaneously.
* Factory fittrd with hydraulic plate clamping facility, and auto touch & cut systems.
* The low pressure setting for tool change provides maximum operation safety.
* The long punching cylinder stroke and deep throat enable mounting of a wide range of special equipment.
* The large punching base with the “T-slot” fixing provides a solid base for securing the punching tooling, along with a wide range of optional and custom designed tooling.
SUNRISE: SINGLE VEE PRESS BRAKE ATTACHMENT
SKU:
PNS700776
IW-60/80: SUNRISE SA1 PUNCH/SHEAR/NOTCH
SKU:
PNS700786
SLIP ROLLS: 300 X 1.0MM VICE MOUNT QUANTUM
SKU:
ROL131120
SLIP ROLLS: 610 X 2MM HEAVY DUTY
SKU:
ROL131150
SLIP ROLLS: 1300MM X 1.6MM 16G
SKU:
ROL131190
SLIP ROLLS: 1300MM X 1.6MM POWER 1HP 1 PH
SKU:
ROL131229
SLIP ROLLS: 1300MM X 1.0MM POWER 1HP 1 PH
SKU:
ROL131230
SLIP ROLLS: 1300MM X 2.5MM POWER 1.5KW 3 PHASE
SKU:
ROL131232
* Initial pinch rolls with pre-bending
* Motorised up & down rear curving roll enables quick & easy pre-bending
* Digital readout display on rear curving roll position
* Mobile foot pedal control with digital readout display
* Two rolls are powered by reduction gearbox drive system
* Swing out top roller enables cone or cylinder to be removed
* Safety wire interlock system with emergency shut-off
* Rolls include wiring grooves
Includes a conical bending guide roller
SLIP ROLLS: 1300MM X 4.0MM POWER 2.2KW 3 PHASE
SKU:
ROL131234
* Initial pinch rolls with pre-bending
* Motorised up & down rear curving roll enables quick & easy pre-bending
* Digital readout display on rear curving roll position
* Mobile foot pedal control with digital readout display
* Two rolls are powered by reduction gearbox drive system
* Swing out top roller enables cone or cylinder to be removed
* Safety wire interlock system with emergency shut-off
* Rolls include wiring grooves
* Includes a conical bending guide roller
SLIP ROLLS: 1300MM X 6.0MM POWER 3.0KW 3 PHASE
SKU:
ROL131236
* Initial pinch rolls with pre-bending
* Motorised up & down rear curving roll enables quick & easy pre-bending
* Digital readout display on rear curving roll position
* Mobile foot pedal control with digital readout display
* Two rolls are powered by reduction gearbox drive system
* Swing out top roller enables cone or cylinder to be removed
* Safety wire interlock system with emergency shut-off
* Rolls include wiring grooves
Includes a conical bending guide roller
SLIP ROLLS: 2550MM X 6.0MM POWER 5.5KW 3PHASE
SKU:
ROL131239
* Initial pinch rolls with pre-bending
* Motorised up & down rear curving roll enables quick & easy pre-bending
* Digital readout display on rear curving roll position
* Mobile foot pedal control with digital readout display
* Two rolls are powered by reduction gearbox drive system
* Swing out top roller enables cone or cylinder to be removed
* Safety wire interlock system with emergency shut-off
* Rolls include wiring grooves
* Includes a conical bending guide roller
AKYAPAK: HYDRAULIC ROLLS 3100 X 40.0MM
SKU:
ROL131260
* 4 Roller Plate bending machine
* Precise pinching of plate between top and bottom rolls.
* Legth of flat ends minimised.
* Cone rolling device
* Induction hardened rolls
* Fully welded steel (St -52 frame)
* Dual bending speed
* Hydraulic open and close operated from control panel
* Top and Bottom (central rolls) driven by hydraulic motor and planetary gear reducer
AKYAPAK: HYDRAULIC AHS ROLLS: 3100 X 6.0MM
SKU:
ROL131265
* 4 Roller Plate bending machine
* Precise pinching of plate between top and bottom rolls.
* Legth of flat ends minimised.
* Cone rolling device
* Induction hardened rolls
* Fully welded steel (St -52 frame)
* Dual bending speed
* Hydraulic open and close operated from control panel
* Top and Bottom (central rolls) driven by hydraulic motor and planetary gear reducer
AKYAPAK: SLIP ROLLS 1250 X 4.5MM 2.2KW FOOT SWITCH
SKU:
ROL131270
AKYAPAK: SLIP ROLLS 1250 X 3.0MM
SKU:
ROL131271
AKYAPAK: SLIP ROLLS ASM 2050 X 4MM
SKU:
ROL131273
* Body is made of cast-iron construction.
* Rolling driven by electric motor + reducer
* Upper roll is openable by side.
* Lower and back rolls are adjutable up and down with hand wheel.
* Self brake main motor
* Cone rolling device
* Seaparate moveable control panel and foot pedal
* Suitable for CE standard.
AKYAPAY; SLIP ROLLS 1270 X ??? 2.2KW
SKU:
ROL131274
AKYAPAK: SLIP ROLLS ASM 1300 X 6.5MM
SKU:
ROL131277
* Body is made of cast-iron construction.
* Rolling driven by electric motor + reducer
* Upper roll is openable by side.
* Lower and back rolls are adjutable up and down with hand wheel.
* Self brake main motor
* Cone rolling device
* Seaparate moveable control panel and foot pedal
* Suitable for CE standard.
AKYAPAK: SLIP ROLLS 2100MM X 6.0MM 2.2KW
SKU:
ROL131300
AKYAPAK: SLIP ROLLS 3100MM X 6MM 4 ROLLS
SKU:
ROL131450
* 4 Roller Plate bending machine
* Precise pinching of plate between top and bottom rolls.
* Legth of flat ends minimised.
* Cone rolling device
* Induction hardened rolls
* Fully welded steel (St -52 frame)
* Dual bending speed
* Hydraulic open and close operated from control panel
* Top and Bottom (central rolls) driven by hydraulic motor and planetary gear reducer
SLIP ROLLS: 3000 X 10.0MM BENZEL
SKU:
ROL131490
* Two rolls powered by gearbox and gear system
* Swing out end enables complete cylinder to be removed
* Heavy duty steel welded main frames
* Mobile control panel with foot pedals
* Precision ground rolls with wiring grooves
* Safety wire interlock system with emergency shut-off
* Motorised up & down top roll for curving adjustment
ER INITAL PINCH ROLING MACHINE: 2000 X 4.0MM
SKU:
ROL131502
* Initial pinch rolls with pre-bending
* Motorised up & down rear curving roll enables quick & easy pre-bending
* Digital readout display on rear curving roll position
* Mobile foot pedal control with digital readout display
* Two rolls are powered by reduction gearbox drive system
* Swing out top roller enables cone or cylinder to be removed
* Safety wire interlock system with emergency shut-off
* Rolls include wiring grooves
SLIP ROLLS: 1500MM X 6.0MM BENZEL PYRAMID STYLE
SKU:
ROL131520
SLIP ROLLS: 1500MM X 6.0MM BENZEL 5.5KW
SKU:
ROL131525
SLIP ROLLS: 3200MM X 6.0MM BENZEL 5HP
SKU:
ROL131530
* The Hydraulic Initial pinch rollsa are designed for shop fabricator.
* All rolls are hardened to 50RC to reduce scratching and pitting.
* These are journalled in high quality roller bearing to provide longer life.
* A unique device is the Pinch Gauging Device for added efficiency.
* Standard LED readout provides fast and easy positioning of the rear bending roll for repetitive work.
SLIP ROLLS: 2500MM X 12.0MM BENZEL
SKU:
ROL132000
* Two rolls powered by gearbox and gear system
* Swing out end enables complete cylinder to be removed
* Heavy duty steel welded main frames
* Mobile control panel with foot pedals
* Precision ground rolls with wiring grooves
* Safety wire interlock system with emergency shut-off
* Motorised up & down top roll for curving adjustment
* Includes Section roll system with flat bar and pipe dies
* Mild steel capacity is rated on hot rolled material with 250MPA
SHEAR ROLL BEND: 310 X 1.0MM 3 IN ONE
SKU:
SFR131150
* This unique machine offers three features in the one machine
* On top is a set of rolls
* In the centre is a bender with removable fingers which work on the same principle as a small press break
* On the lower level of the machine is the shear which has a cast table and a clamping bar to hold workpiece
* The machine is heavy cast construction and can be bench mounted or on a stand
* Ideal machine for small workshops where space is a problem
SHEAR ROLL BEND: 750 X 1.0MM 3 IN ONE
SKU:
SFR131200
* This unique machine offers three features in the one machine
* On top is a set of rolls
* In the centre is a bender with removable fingers which work on the same principle as a small press break
* On the lower level of the machine is the shear which has a cast table and a clamping bar to hold workpiece
* The machine is heavy cast construction and can be bench mounted or on a stand
* Ideal machine for small workshops where space is a problem
SHEAR ROLL BEND: 1050 X 1.0MM 3 IN ONE
SKU:
SFR131325
* 1.0mm Max Shear & Bending for extra capacity
* Also increased minimum rolling diameter of 62mm
* This unique machine offers three features in the one machine
* On top is a set of rolls
* In the centre is a bender with removable fingers which work on the same principle as a small press brake
* On the lower level of the machine is the shear which has a cast table and a clamping bar to hold the workpiece
* The machine is a heavy cast construction and can be bench mounted on a stand
* Ideal for small workshops where space is a problem
SHEAR ROLL BEND: 1050 X 1.5MM 3 IN ONE
SKU:
SFR131350
* 1.5mm Max Shear & Bending for extra capacity
* Also increased minimum rolling diameter of 62mm
* This unique machine offers three features in the one machine
* On top is a set of rolls
* In the centre is a bender with removable fingers which work on the same principle as a small press brake
* On the lower level of the machine is the shear which has a cast table and a clamping bar to hold the workpiece
* The machine is a heavy cast construction and can be bench mounted on a stand
* Ideal for small workshops where space is a problem