- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
HEIGHT GAUGE: 1000MM DASQUA
SKU:
HG-0201026
* Manufactured by DASQUA
* Toolroom quality for height measurements
* Scale body is hardened and ground with satin chrome finish on all scales and plates
* Fitted with magnifying glass to enlarge reading
* Ultra smooth fine adjustment mechanism
* Scriber point is carbide tipped and removeable
* Base is hardened, ground and lapped for maximum flatness
HEIGHT GAUGE: DIGITAL 0-300/12″ DASQUA
SKU:
HG-0201230
* Manufactured by DASQUA
* This digital height gauge comes with the absolute fuction
* Direct inch/metric conversion
* Large easy to read digital scale
* Carbide-tipped scriber for sharp, clean lines
* Class "A" for electrostatic discharge
* Base is hardened, ground and lapped for maximum flatness
* Zero-setting fuction in any position
HEIGHT GAUGE: DIAL 300MM TWIN BEAM DASQUA
SKU:
HG-0201240
* Manufactured by DASQUA
* Large east to read digital display
* Double stainless Steel beams are hardened to assure high accuracy and long working life
* Zero setting can be obtained throughout the gauges range
* Seperate counters register both upward and downward travel
* Carbide tipped scriber making sharper clean lines
* Base is hardened, ground and lapped for maximum flatness
HEIGHT GAUGE: DIAL 500MM TWIN BEAM DASQUA
SKU:
HG-0201250
* Manufactured by DASQUA
* Large east to read digital display
* Double stainless Steel beams are hardened to assure high accuracy and long working life
* Zero setting can be obtained throughout the gauges range
* Seperate counters register both upward and downward travel
* Carbide tipped scriber making sharper clean lines
* Base is hardened, ground and lapped for maximum flatness
HARDNESS TESTER: EHT-3B ROCKWELL DAIL DASQUA
SKU:
HRT100190
* The Rockwell Hardness Tester is a simple but ruggedly constructed machine available for quick and easy testing of all ranges of material hardness
* The minute surface impression can be used to test finished goods
* The harness number is read directly on the dial
* The Rockwell Hardness number is derived from the net increase in depth of impression as the load on a penetrator is increased from a fixed minimum load to a higher load and then returned to the minimum load
HARDNESS TESTER: EHT-3B ROCKWELL DIGITAL DASQUA
SKU:
HRT100210
* The Rockwell Hardness Tester is a simple but ruggedly constructed machine available for quick and easy testing of all ranges of material hardness
* The minute surface impression can be used to test finished goods
* The harness number is read directly on the digital screen
* The Rockwell Hardness number is derived from the net increase in depth of impression as the load on a penetrator is increased from a fixed minimum load to a higher load and then returned to the minimum load
* ROCKWELL SCALE:
HRA,HRB, HRC, HRD, HRE,HRF,HRG, HRH, HRK, HRL, HRM, HRR, HRS, HRV
* Preliminary Test Force: 10kgf,98.DNT. Permitted error ±2.0%
* Tatal Force: 60kgf588.4NI, 100kgf,980.7NJ. 150kgfI147IN. Permitter Error ±1.0%
Duration Time: Adjustable 1-60s
* Hardness indication: 5.2" Touch screen resolution 640 x 480
* Loading control: 0.1hr
* Hardness conversion: HRC, HV, HBS, HBW, HK, HRA, HRD, HR15N, HRB, HR3ON
* HR45N, H5, HRF, HR15T, HR45T,
HARDNESS TESTER: PORTABLE LEEB
SKU:
HRT100290
HARDNESS TESTER: IMPACT HAND BRINELL CZ POLDI
SKU:
HRT100300
* This tester measures by the comparative method according to Brinell
* Hardness tester is supplied with tables in English french and German
* Manufactured in the Czech Republic
The “Poldi Hammer” is the most simple and most economical device for define hardness according to Brinell and determining tensile strength of engineering and tool steels, dies, forgings, railway material, beams, sheets, pipes, cast steel and various parts of steel as well as determining hardness according to Brinell for cast bronze, aluminum, brass, cooper, grey and chilled cast iron
* POLDI hardness tester enable to perform the impact test with the help of a hammer at the workplaces, in workshops, at assembly sites or any other places. Brinell hardness and tensile strength can be read from tables then.
Services
* LMATS provide advanced testing and inspection services in Melbourne Victoria, Sydney - NSW and Brisbane Queensland, Tasmania, South Australia in the following Sectors:
Advanced NDT - ECA Eddy Current Array test
Advanced NDT - PAUT Phased Array Ultrasonic test
Advanced NDT - TOFD Time of Flight Diffraction
Advanced NDT - CRT Computed Radiographic testing
NDT - Non-destructive testing - RT, UT, ET, MT, PT
Coatings Inspection - NACE
Pressure vessel Inspection AICIP & Conformity
Chemical analysis (Spark Spectroscopy)
Third party Inspection & expert Witness
Quality Audit & NDT Level 3 services
Hydrostatic pressure test
PMI - Positive Material Identification (XRF).
Weld (WPS / WPQR) qualification test
Mechanical testing (engineering)
Corrosion Resistance Test
Metallurgical services
Failure investigation
Concrete testing - GPR, thickness, strength.
Poldi hardness test
HARDNESS TESTING BAR: 152 X 12.5MM
SKU:
HRT100320
LEVEL: ENGINEERS PRECISION 150MM DASQUA
SKU:
LVE0363606
LEVEL: ENGINEERS PRECISION 200MM DASQUA
SKU:
LVE0363608
LEVEL: ENGINEERS PRECISION 250MM DASQUA
SKU:
LVE0363610
LEVEL: ENGINEERS PRECISION 300MM DASQUA
SKU:
LVE0363612
LEVEL: FRAME TYPE 150MM DASQUA
SKU:
LVE0364606
LEVEL: FRAME TYPE 200MM DASQUA
SKU:
LVE0364608
LEVEL: FRAME TYPE 250MM DASQUA
SKU:
LVE0364610
LEVEL: FRAME TYPE 300MM DASQUA
SKU:
LVE0364612
SMALL HOLE GAUGE SET: 3-13.0MM MITUTOYO
SKU:
MCB700250
BORE GAUGE: 4 – 6.0MM X 0.01MM DASQUA
SKU:
MCB750200
BORE GAUGE: 6 – 10.0MM X 0.001MM DASQUA
SKU:
MCB750202
BORE GAUGE: 10 – 18.0MM X 0.001MM DASQUA
SKU:
MCB750204
BORE GAUGE: 18 – 35.0MM X 0.001MM DASQUA
SKU:
MCB750206
BORE GAUGE: 35 – 50.0MM X 0.001MM DASQUA
SKU:
MCB750208
BORE GAUGE: 50 – 100.0MM X 0.001MM DASQUA
SKU:
MCB750210
BORE GAUGE: 50 – 160.0MM X 0.001MM DASQUA
SKU:
MCB750212
BORE GAUGE: 160-250MM X 0.001MM DASQUA
SKU:
MCB750230
* This Dasqua precision Bore gauge set comes complete with fixed and inserting carbide anvils.
* Supplied with extensions and washers for fine adjustment in sizes to select a specific range.
* Ergonomic design and supplied with heavey cary case for safe storage.
* For close measurement of measure internal hole dimensions and shape errors of different diameter depth by comparative method.
BORE GAUGE: 250-450MM X 0.001MM DASQUA
SKU:
MCB750240
* This Dasqua precision Bore gauge set comes complete with fixed and inserting carbide anvils.
* Supplied with extensions and washers for fine adjustment in sizes to select a specific range.
* Ergonomic design and supplied with heavey cary case for safe storage.
* For close measurement of measure internal hole dimensions and shape errors of different diameter depth by comparative method.
BORE GAUGE: 2 – 6″ X 0.0005″ DASQUA
SKU:
MCB750260
* This Dasqua precision Bore gauge set comes complete with fixed and inserting carbide anvils.
* Supplied with extensions and washers for fine adjustment in sizes to select a specific range.
* Ergonomic design and supplied with heavey cary case for safe storage.
* For close measurement of measure internal hole dimensions and shape errors of different diameter depth by comparative method.
BORE GAUGE: RANGE 1.0 – 15.0MM GARVIN
SKU:
MCB750270
BORE GAUGE: RANGE 15.0 – 30.0MM GARVIN
SKU:
MCB750280
BORE MICROMETER: 3-POINT INSIDE 12-16MM DASQUA
SKU:
MCB750360
BORE MICROMETER: 3 POINT INSIDE 16-20MM DASQUA
SKU:
MCB750361
BORE MICROMETER: 3-POINT INSIDE 20-25MM DASQUA
SKU:
MCB750362
BORE MICROMETER: 3-POINT INSIDE 30-40MM DASQUA
SKU:
MCB750364
BORE MICROMETER: 3-POINT INSIDE 40-50MM DASQUA
SKU:
MCB750365
BORE MICROMETER: 3-POINT INSIDE SET 12-20MM DASQUA
SKU:
MCB750376
* Manufactured by Dasqua to DIN863
* This three point internal micrometer to auto centre and measure internal bores
* Hard chrome plated for durability
* Satin finish
* Extension rod provide wide measuring range
* Measuring rods are hardened, precision ground and lapped
* Designed with high precision measurement, stable reading, brief operation
* Larger measuring range and suitable for measuring blind bores
BORE MICROMETER: 3-POINT INSIDE SET 20-50MM DASQUA
SKU:
MCB750377
* Manufactured by Dasqua to DIN863
* This three point internal micrometer to auto centre and measure internal bores
* Hard chrome plated for durability
* Satin finish
* Extension rod provide wide measuring range
* Measuring rods are hardened, precision ground and lapped
* Designed with high precision measurement, stable reading, brief operation
* Larger measuring range and suitable for measuring blind bores
BORE MICROMETER: 3-POINT INSIDE SET 6-12MM
SKU:
MCB750384
BORE MICROMETER: 3-POINT INSIDE DIGITAL SET 12-20MM
SKU:
MCB750386
BORE MICROMETER: 3 POINT INSIDE DIGITAL SET 20-50MM
SKU:
MCB750387
BORE MICROMETER: 3 POINT INSIDE DIGITAL SET 50-100MM
SKU:
MCB750390
TELESCOPIC GAUGE SET: DASQUA 8-150MM 6PC SET
SKU:
MCM0113010
* Self centering feature for quick measurement of inside diameters of holes and widths of slots with a micrometer - Both gauging ends are heat treated stainless steel and ground to a radius - Satin chrome finished - Packed in plastic pouch for safe keeping * Sises: 8-12.7MM, 12.7-19MM, 19-32.0MM, 32-54.0MM, 54-90.0MM, 90-150MM *
INSIDE MICROMETER: DASQUA 5-30MM X 0.01MM
SKU:
MCM0113015
INSIDE MICROMETER: DASQUA 25-50MM X 0.01MM
SKU:
MCM0113016
INSIDE MICROMETER: DASQUA 50-75MM X 0.01MM
SKU:
MCM0113017
INSIDE MICROMETER: DASQUA 75-100MM X 0.01MM
SKU:
MCM0113018
INSIDE MICROMETER: DASQUA 5-100MM
SKU:
MCM0113020
INSIDE MICROMETER: RANGE 50-300MM *141 -206 MITUTOYA
SKU:
MCM0113025
MICROMETER: 1.25MM MOORE & WRIGHT
SKU:
MCM0132102
INSIDE MICROMETER: 0-1″ DASQUA
SKU:
MCM0132110
INSIDE MICROMETER: 1-2″ DASQUA
SKU:
MCM0132111
INSIDE MICROMETER: 2-3″ DASQUA
SKU:
MCM0132112
INSIDE MICROMETER: 3-4″ X 0.001″ DASQUA
SKU:
MCM0132114
INSIDE MICROMETER: 0.2-4″ DASQUA
SKU:
MCM0132120
OUTSIDE MICROMETER: 1-2″ X 0.001″ DASQUA
SKU:
MCM0132156
OUTSIDE MICROMETER: 2-3″ X 0.001″ DASQUA
SKU:
MCM0132158
OUTSIDE MICROMETER: 3-4″ X 0.001″ DASQUA
SKU:
MCM0132160
OUTSIDE MICROMETER: 4-5″ X 0.0001″ DASQUA
SKU:
MCM0132166
OUTSIDE MICROMETER: 5-6″ X 0.0001″ DASQUA
SKU:
MCM0132168
OUTSIDE MICROMETER: 0-150MM DASQUA 6PC SET METRIC
SKU:
MCM0132212
* This Dasqua outside micrometer is finished in satin chrome
* Manufactured to the finest tolerences
* Baked enamal frame
* Graduations 0.01mm
* Ratchet stop provides constant measuring force
* Comes in plastic case for safe storage
* The Dasqua 6pc outside micrometer set is manufactured to the finest tolerences
* This set come packed in wooden case for safe keeping and storage
OUTSIDE MICROMETER: 0-300MM DASQUA 12PC SET METRIC
SKU:
MCM0132214
* This Dasqua outside micrometer is finished in satin chrome
* Manufactured to the finest tolerences
* Baked enamal frame
* Graduations 0.001"
* Ratchet stop provides constant measuring force
* Comes in plastic case for safe storage
* The Dasqua 12pc outside micrometer set is manufactured to the finest tolerences
* This set come packed in wooden case for safe keeping and storage
OUTSIDE MICROMETER: 150-300MM DASQUA 6PC SET METRIC
SKU:
MCM0132216
* This Dasqua outside micrometer is finished in satin chrome
* Manufactured to the finest tolerences
* Baked enamal frame
* Graduations 0.01mm
* Ratchet stop provides constant measuring force
* Comes in plastic case for safe storage
* The Dasqua 150-300mm outside micrometer set is manufactured to the finest tolerences
* This set come packed in plastic case for safe keeping and storage
OUTSIDE MICROMETER: 0-6″ DASQUA 6PC SET IMPERIAL
SKU:
MCM0132222
* This Dasqua outside micrometer is finished in satin chrome
* Manufactured to the finest tolerences
* Baked enamal frame
* Graduations 0.001"
* Ratchet stop provides constant measuring force
* Comes in plastic case for safe storage
* The Dasqua 6pc outside micrometer set is manufactured to the finest tolerences
* This set come packed in wooden case for safe keeping and storage
OUTSIDE MICROMETER: 0-25MM DASQUA
SKU:
MCM0132504
* This Dasqua outside micrometer is finished in satin chrome
* Manufactured to the finest tolerences
* Baked enamal frame
* Graduations 0.001mm
* Ratchet stop provides constant measuring force
* Comes in plastic case for safe storage
* The Dasqua 1pc outside micrometer is manufactured to the finest tolerences
* Accuracy 0.004mm
OUTSIDE MICROMETER: 25-50MM DASQUA
SKU:
MCM0132506
* This Dasqua outside micrometer is finished in satin chrome
* Manufactured to the finest tolerences to DIN 863
* Baked enamal frame
* Graduations 0.01mm
* This model is fitted with precision hardened, ground and lapped stainless steel spindle rep[lacing the traditional ally/carbob steel nrod m,ostley used in the industry
8 New special carbide has replaced the normal rub off carbide tip
W With ratchet stop for constant force ( 5-8N which is 20% better than the normal stand 4-10N )
* Comes in plastic case for safe storage
OUTSIDE MICROMETER: 50-75MM DASQUA
SKU:
MCM0132508
* This Dasqua outside micrometer is finished in satin chrome
* Manufactured to the finest tolerences
* Baked enamal frame
* Graduations 0.01mm
* Ratchet stop provides constant measuring force
* Comes in plastic case for safe storage
* The Dasqua 1pc outside micrometer is manufactured to the finest tolerences
OUTSIDE MICROMETER: 75-100MM DASQUA
SKU:
MCM0132510
* This Dasqua outside micrometer is finished in satin chrome
* Manufactured to the finest tolerences
* Baked enamal frame
* Graduations 0.01mm
* Ratchet stop provides constant measuring force
* Comes in plastic case for safe storage
* The Dasqua 1pc outside micrometer is manufactured to the finest tolerences
OUTSIDE MICROMETER: 100-125MM DASQUA
SKU:
MCM0132514
* This Dasqua outside micrometer is finished in satin chrome
* Manufactured to the finest tolerences
* Baked enamal frame
* Graduations 0.01mm
* Ratchet stop provides constant measuring force
* Comes in plastic case for safe storage
* The Dasqua 1pc outside micrometer is manufactured to the finest tolerences
OUTSIDE MICROMETER: 125-150MM DASQUA
SKU:
MCM0132518
* This Dasqua outside micrometer is finished in satin chrome
* Manufactured to the finest tolerences
* Baked enamal frame
* Graduations 0.01mm
* Ratchet stop provides constant measuring force
* Comes in plastic case for safe storage
* The Dasqua 1pc outside micrometer is manufactured to the finest tolerences
OUTSIDE MICROMETER: 150-175MM DASQUA
SKU:
MCM0132522
* This Dasqua outside micrometer is finished in satin chrome
* Manufactured to the finest tolerences
* Baked enamal frame
* Graduations 0.01mm
* Ratchet stop provides constant measuring force
* Comes in plastic case for safe storage
* The Dasqua 1pc outside micrometer is manufactured to the finest tolerences
OUTSIDE MICROMETER: 175-200MM DASQUA
SKU:
MCM0132526
* This Dasqua outside micrometer is finished in satin chrome
* Manufactured to the finest tolerences
* Baked enamal frame
* Graduations 0.01mm
* Ratchet stop provides constant measuring force
* Comes in plastic case for safe storage
* The Dasqua 1pc outside micrometer is manufactured to the finest tolerences
OUTSIDE MICROMETER: 200-225MM DASQUA
SKU:
MCM0132528
OUTSIDE MICROMETER: 300-400MM DASQUA
SKU:
MCM0132540
OUTSIDE MICROMETER: 1000-1200MM DASQUA
SKU:
MCM0132550
DEPTH MICROMETER: DASQUA 0-25MM
SKU:
MCM0133110
DEPTH MICROMETER: DASQUA 0-50MM
SKU:
MCM0133112
DEPTH MICROMETER: DASQUA 0-75MM
SKU:
MCM0133115
DEPTH MICROMETER: DASQUA 0-100MM
SKU:
MCM0133120
DEPTH MICROMETER: DASQUA 0-150MM
SKU:
MCM0133130