- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
DIGITAL CALIPER: 12″/300MM MITUTOYO ABSOLUTE
SKU:
CAL0302150
* Mitutoyo measuring instuments are manufactured in Japan
* Absolute Digital caliper with data output
* IP67 means waterproof, dustproof all 100% inspected
* Auto power off after 20min
* Carbide faced jaws to enhance durability
* Large thumb rest to aid the ease of use
* Jaw tips are relieved to easy measure thin parts
* This dial caliper is ideal for use workshop conditions
* Allows step measurments
* Large LCD display make it easy to read
DIGITAL CALIPER: 8″/200MM MITUTOYO IP67 ABSOLUTE
SKU:
CAL0302230
* Mitutoyo measuring instuments are manufactured in Japan
* Absolute Digital caliper with data output
* IP67 means waterproof, dustproof all 100% inspected
* Auto power off after 20min
* Carbide faced jaws to enhance durability
* Large thumb rest to aid the ease of use
* Jaw tips are relieved to easy measure thin parts
* This dial caliper is ideal for use workshop conditions
* Allows step measurments
* Large LCD display make it easy to read
DIAL CALIPER: 200MM 505-731 MITUTOYO
SKU:
CAL0302240
* Mitutoyo measuring instuments are manufactured in Japan
* The dial movement in this capiper is shockproof
* Easy to read dial
* Titanium coating is applied to the slideways to enhance durability
* Large thumb rest to aid the ease of use
* Jaw tips are relieved to easy measure thin parts
* This dial caliper is ideal for use workshop conditions
Q234 GEAR TOOTH VERNIER CALIPER
SKU:
CAL033234
* This vernier is a specalized design for measuring gear teeth.
* The caliper consists of two adjustable verniers
* These reference two dimensions on the gear and provide a measurement
* Vertical scale: Measures the depth of the teeth from the top of the pitch line.
* Horizontal Scale: This is used to measure the Chordal Thickness of the gear tooth
* One of the benefits using a caliper is that the gear does not have to be removed from the machine.
SCALES: DIGITAL 30KG 24 KEY LED DISPLAY
SKU:
CH-282440
* This set of weighing scales can be used as a portable unit
* Equipped with rechargeable batteries together with a mains charging unit
* This makes it a very versitile unit so it can be used either way
* Led and light display panel
* 24 Key operational keyboard
* Stainless top tray measuring 330 x 230mm
* Display includes unit price, weight, total cost of sale
* Not Weighs Less than 5 Grams
DIAL GAUGE: DASQUA 0-10MM X 0.01 JEWEL MOVEMENT
SKU:
DG-0120100
DIAL GAUGE: DASQUA 0-10MM X 0.01 WATERPROOF
SKU:
DG-0120110
* This Dasqua dial gauge is manufactured to strict accuracy standards (DIN878)
* IP54 ( resistant to coolant fluids
* Comes with jewel movement for accuracy and extended work life
* Supplied with calibration certificate
* All orifaces are sealed with O Rings and stem with rubber bellows
* Shockproof
* Comes with two backing plates - leg and flatback
DIAL GAUGE: DASQUA 0-1MM X 0.001 JEWEL PRECISION
SKU:
DG-0120210
* This Dasqua dial gauge is manufactured to strict accuracy standards (DIN878)
* IP54 ( resistant to coolant fluids
* Comes with jewel movement for accuracy and extended work life
* Supplied with calibration certificate
* All orifaces are sealed with O Rings and stem with rubber bellows
* Shockproof
DIAL GAUGE: DASQUA 0.10MM IP54 SHOCK PROOF
SKU:
DG-0121003
* This Dasqua dial gauge is manufactured to strict accuracy standards (DIN878)
* IP54 ( resistant to coolant fluids
* Comes with jewel movement for accuracy and extended work life
* Supplied with calibration certificate
* All orifaces are sealed with O Rings and stem with rubber bellows
* Shockproof
DIAL GAUGE: INSIZE 0.10 X 0.01MM JEWEL MOVEMENT
SKU:
DG-0121005
DIGITAL GAUGE: INSIZE 0-10MM STEM MOUNT
SKU:
DG-0121006
DIAL GAUGE: DASQUA 0-10MM X 0.01MM 2 X MOUNT PLATES
SKU:
DG-0121007
* Manufactured by DASQUA
* Meets DIN878 - Satin-chrome finish brass body
* Anti magnetic
* Jeweled bearing
* Shock-proof
* Interchangeable carbide contact point diameter 2mm supplied with wrench
* Probe length 16.5mm/0.62-
* With 2 hding stems: metric 6mm and 8mm imperial 5/32" and 3/8"
* Comes with two backing plates
* Lug and flat back
DIAL GAUGE: DASQUA 0-1″ JEWEL LUG MOUNT
SKU:
DG-0121014
* Manufactured by DASQUA
* Meets DIN878 - Satin-chrome finish brass body
* Anti magnetic
* Jeweled bearing
* Shock-proof
* Interchangeable carbide contact point diameter 2mm supplied with wrench
* Probe length 16.5mm/0.62-
* With 2 hding stems: metric 6mm and 8mm imperial 5/32" and 3/8"
* Comes with two backing plates
* Lug and flat back
DIAL GAUGE: DASQUA 0-2″ LUG MOUNT
SKU:
DG-0121015
DIAL GAUGE: DASQUA 0-30MM JEWEL LUG MOUNT
SKU:
DG-0121018
DIAL GAUGE: DASQUA 0-30MM JEWEL STEM MOUNT
SKU:
DG-0121019
DIAL GAUGE: DASQUA 0.50MM JEWEL LUG BACK
SKU:
DG-0121020
DIGITAL DIAL GAUGE: DASQUA 0-12.7/0-1/2″ 0.01/0.0005″
SKU:
DG-0121022
DIGITAL DIAL GAUGE: DASQUA 0-12.7/0.1MM 0.5″ x 0.001/0.00005″
SKU:
DG-0121024
* Manufactured by DASQUA
* Large easy to read digital display
* Resolution 0.001mm/0.00005
* Buttons mm/inch on/off zero
* Direct Metric/Inch conversion
* Positive tactile-feel button activation
* Stem mount ( Lug back plate also inc in pack)
* High precision contact point
* Takes CR2032 battery (inc)
* USB data output
DIGITAL DIAL GAUGE: DASQUA 0-12.7/0.1MM 0.5″ x 0.001/0.00005″
SKU:
DG-0121026
DIAL TEST INDICATOR: DASQUA 1.0-6.0MM X 0.01MM
SKU:
DG-0121110
* This Dasqua dial test indicator has twice range ability
* First in the industry to produce such a indicator !
* Manufactured to strict accuracy standards and compare favourably with all major brands
* Easy to read tilted dial with extra contact point
* 210deg swivel arc
* Jewel bearings
* Automatac reversal
DIAL TEST INDICATOR: STYLI FINGER SPARE PART
SKU:
DG-100020
DIAL TEST INDICATOR: DASQUA RANGE 0.8MM X 0.01MM DIV
SKU:
DG-100030
DIAL TEST INDICATOR: DASQUA RANGE 0.2MM X 0.002MM DIV
SKU:
DG-100032
DIAL TEST INDICATOR: DASQUA RANGE 1.6MM X 0.01MM DIV
SKU:
DG-100036
* This Dasqua dial test indicator has a jewel movement and twice range
* Easy read tilted 25.0mm dial
* With extra contact point
* High precision contact point
* Shock resistant
* Automatical reversal
* Swvel arm movement 210 degrees
* Clamping shank diameter is 8.0mm
* Probe length is 13.5mm
* Precision gear driven design for smooth movement
* High precision contact point is hardened and precision ground
DIAL TEST INDICATOR: DASQUA RANGE 0-0.02″ X 0.0005″
SKU:
DG-100040
* This Inch Dasqua dial test indicator has a jewel movement
* Easy read tilted 1-1/2" dial
* High precision contact point
* Shock resistant
* Precision gear driven design with smooth movement
* Swvel arm movement 210 degrees
* Clamping shank diameter is 8.0mm
* Probe length is 13.5mm
* High precision contact point is hardened and precision ground
DIAL GAUGE: METRIC 0-1MM METEC 58MM DAIL FACE 0.001
SKU:
DG-758005
DIAL GAUGE: METRIC 0-30MM DASQUA FLAT BACK
SKU:
DG-758040
DIAL GAUGE: METRIC 0-30MM DASQUA LUG BACK
SKU:
DG-758045
DIAL GAUGE: METRIC 0-50MM DASQUA LUG BACK
SKU:
DG-758050
CO-AX INDICATOR: METRIC 0-3MM DASQUA
SKU:
DG-759180
* Manufactured by DASQUA
* This Co-Axial indicator comes complete with 6 interchangable caliper arms
* The length of the head is 140mm and the mounting shank is 10mm
* Maximum measuring range is 3mm with caliper arm lengths of 50 100 and 150mm
* Main uses are for centering finding the corners scribe and mark the zero point
* Comes with stop bar for fixing to the head while the spindle rotates
CO-AX INDICATOR: IMPERIAL 0 – 0.15″ DASQUA
SKU:
DG-759182
* Manufactured by Dasqua
* This Co-Axial indicator comes complete with 6 interchangable caliper arms
* The length of the head is 140mm and the mounting shank is 10mm
* Maximum measuring range is 0.0.25" with caliper arm lengths of 50 100 and 150mm
* Main uses are for centering finding the corners scribe and mark the zero point
* Comes with stop bar for fixing to the head while the spindle rotates
DIAL GUAGE: MITUTOYO 2414F
SKU:
DG-771600
* Mitutoyo measuring instuments are manufactured in JAPAN
* Renown throughout the world for their quality
* Indicator features a hand that makes one revolution throughout the entire spindle range
* This prevents costly measuring errors made with indicators whose hands make as many as 2-1/2 revolutions
DIAL GUAGE: MITUTOYO 0-5MM X 0.01MM
SKU:
DG-771610
* Mitutoyo measuring instuments are manufactured in JAPAN
* Renown throughout the world for their quality
* Indicator features a hand that makes one revolution throughout the entire spindle range
* This prevents costly measuring errors made with indicators whose hands make as many as 2-1/2 revolutions
DIAL GUAGE: MITUTOYO 0-10MM X 0.01MM 2046S
SKU:
DG-771615
* Mitutoyo measuring instuments are manufactured in JAPAN
* Renown throughout the world for their quality
* Indicator features a hand that makes one revolution throughout the entire spindle range
* This prevents costly measuring errors made with indicators whose hands make as many as 2-1/2 revolutions
DIAL GUAGE: MITUTOYO 0-20MM X 0.01MM
SKU:
DG-771620
* Mitutoyo measuring instuments are manufactured in JAPAN
* Renown throughout the world for their quality
* Indicator features a hand that makes one revolution throughout the entire spindle range
* This prevents costly measuring errors made with indicators whose hands make as many as 2-1/2 revolutions
DIAL GUAGE: MITUTOYO 0-30MM X 0.01MM
SKU:
DG-771630
DIGIMATIC INDICATOR GUAGE: MITUTOYO .500″/12.7MM
SKU:
DG-771640
* Mitutoyo measuring instruments are manufactured in JAPAN
* Renown throughout the world for their quality
* This electronic indicator measures 0 to 0.5" (0 to 12.7mm) with 0.0005" (0.01mm) resolution * And ± 0.0008" accuracy, for measuring short, linear distances in mechanical engineering, * Also in machining, and manufacturing applications
* LCD displays in both inches and metric units,
* Indicator has a flat back for stem/plate mounting
* Absolute electrostatic capacitance-type linear encoder for accurate measurements
* Comes with 3/8" diameter stem and a #4-48 UNF contact point thread mount
* Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water
DIAL TEST INDICATOR: MITUTOYO 0.8MM X 0.01MM
SKU:
DG-771680
* Mitutoyo measuring instuments are manufactured in JAPAN
* Renown throughout the world for their quality
* Indicator features a hand that makes one revolution throughout the entire spindle range
* This prevents costly measuring errors made with indicators whose hands make as many as 2-1/2 revolutions
DIGITAL RATCHET COUNTER: 5 DIGITS
SKU:
DRC210100
DIGITAL DISPLAY: MITUTOYO 3 AXIS
SKU:
DRO100720
* New model from Mitutoyo
* By the 2-scale data addition funtion a total value of readings by the 2 scale is displayed as a displacement on the Z-axis one scale is attached on the fine-feed table and the other to the coarse-feed table
* Can store offset values of a maximum of 10 different kinds of cutting tools in the memory
* This eliminates tedious value inputs when changing tools
DIGITAL SCALE: MITUTOYO 100MM
SKU:
DRO100724
* Suitable for milling machine XY table Jigs etc
* Dimensionally compatible with AT111 linear scale units
* Provided with scale reference points a 50mm pitch over the entire scale
* Even after the power is turned off the datum point for machining can be easily determinded by using these reference points
DIGITAL SCALE: MITUTOYO 200MM
SKU:
DRO100730
* Suitable for milling machine XY table Jigs etc
* Dimensionally compatible with AT111 linear scale units
* Provided with scale reference points a 50mm pitch over the entire scale
* Even after the power is turned off the datum point for machining can be easily determinded by using these reference points
DIGITAL SCALE: MITUTOYO 250MM
SKU:
DRO100740
* Suitable for milling machine XY table Jigs etc
* Dimensionally compatible with AT111 linear scale units
* Provided with scale reference points a 50mm pitch over the entire scale
* Even after the power is turned off the datum point for machining can be easily determinded by using these reference points
DIGITAL SCALE: MITUTOYO 300MM
SKU:
DRO100745
* Suitable for milling machine XY table Jigs etc
* Dimensionally compatible with AT111 linear scale units
* Provided with scale reference points a 50mm pitch over the entire scale
* Even after the power is turned off the datum point for machining can be easily determinded by using these reference points
DIGITAL SCALE: MITUTOYO 350MM
SKU:
DRO100752
* Suitable for milling machine XY table Jigs etc
* Dimensionally compatible with AT111 linear scale units
* Provided with scale reference points a 50mm pitch over the entire scale
* Even after the power is turned off the datum point for machining can be easily determinded by using these reference points
DIGITAL SCALE: MITUTOYO 450MM
SKU:
DRO100754
* Suitable for milling machine XY table Jigs etc
* Dimensionally compatible with AT111 linear scale units
* Provided with scale reference points a 50mm pitch over the entire scale
* Even after the power is turned off the datum point for machining can be easily determinded by using these reference points
DIGITAL SCALE: MITUTOYO 500MM
SKU:
DRO100756
* Suitable for milling machine XY table Jigs etc
* Dimensionally compatible with AT111 linear scale units
* Provided with scale reference points a 50mm pitch over the entire scale
* Even after the power is turned off the datum point for machining can be easily determinded by using these reference points
DIGITAL SCALE: MITUTOYO 1500MM
SKU:
DRO100800
* Suitable for milling machine XY table Jigs etc
* Dimensionally compatible with AT111 linear scale units
* Provided with scale reference points a 50mm pitch over the entire scale
* Even after the power is turned off the datum point for machining can be easily determinded by using these reference points
DIGITAL READOUT: SINO 2 AXIS(M)
SKU:
DRO300120
DIGITAL READOUT: SINO 2 AXIS (L&M)
SKU:
DRO300125
DIGITAL READOUT: SINO 3 AXIS (L&M)
SKU:
DRO300127
DIGITAL SCALE: SINO 220MM
SKU:
DRO300160
DIGITAL SCALE: SINO 270MM
SKU:
DRO300165
DIGITAL SCALE: SINO 320MM KA 300
SKU:
DRO300169
DIGITAL SCALE: SINO 370MM
SKU:
DRO300170
DIGITAL SCALE: SINO 420MM
SKU:
DRO300175
DIGITAL SCALE: SINO 470MM
SKU:
DRO300180
DIGITAL SCALE: SINO 620MM
SKU:
DRO300187
DIGITAL SCALE: SINO 670MM
SKU:
DRO300188
DIGITAL SCALE: SINO 700MM
SKU:
DRO300189
DIGITAL SCALE: SINO 720MM
SKU:
DRO300190
DIGITAL SCALE: SINO 820MM
SKU:
DRO300195
DIGITAL SCALE: SINO 870MM
SKU:
DRO300196
DIGITAL SCALE: SINO 920MM
SKU:
DRO300196A
DIGITAL SCALE: SINO 970MM
SKU:
DRO300197
DIGITAL SCALE: SINO 1020MM
SKU:
DRO300200
DIGITAL SCALE: SINO 1200MM
SKU:
DRO300205
DIGITAL SCALE: SINO 1500MM
SKU:
DRO300215
DIGITAL SCALE: SINO 2000MM
SKU:
DRO300220
DIGITAL SCALE: SINO 2500MM
SKU:
DRO300222
DIGITAL SCALE: SINO 70MM SLIM
SKU:
DRO300290
DIGITAL SCALE: SINO 120MM SLIM
SKU:
DRO300292
DIGITAL SCALE: SINO 170MM SLIM
SKU:
DRO300294
DIGITAL SCALE: SINO 220MM SLIM
SKU:
DRO300301
DIGITAL SCALE: SINO 270MM SLIM
SKU:
DRO300302
DIGITAL SCALE: SINO 320MM SLIM KA500
SKU:
DRO300320
DIGITAL SCALE: SINO 370MM SLIM
SKU:
DRO300332