- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
LATHE DOG: 1-1/2″ STRAIGHT
SKU:
LD-210540
LATHE DOG: 2″ STRAIGHT
SKU:
LD-210550
LATHE DOG: 2-1/2″ STRAIGHT
SKU:
LD-210560
LATHE DOG: 3″ STRAIGHT
SKU:
LD-210570
LIVE CENTRE: SKODA MT1 CZECH REPUBLIC
SKU:
LLC625990
* These Skoda live centres are known for their quality and long service record
* European quality - manufactured in the Czech Republic
* Skoda factory which has a long history of manufacturing quality products
* The rotating spindle is extended right through the tapered shank.
* Two specially designed adjustable needle-roller bearings carry all radial loads.
* A heavy duty ball thrust bearing takes all axial thrust.
* Thermal expansion and shock loads are absorbed by a special compensator spring.
* Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the built-in oil seal, which also prevents loss of lubricant.
LIVE CENTRE: SKODA MT2 CZECH REPUBLIC
SKU:
LLC626100
* These Skoda live centres are known for their quality and long service record
* European quality - manufactured in the Czech Republic
* Skoda factory which has a long history of manufacturing quality products
* The rotating spindle is extended right through the tapered shank.
* Two specially designed adjustable needle-roller bearings carry all radial loads.
* A heavy duty ball thrust bearing takes all axial thrust.
* Thermal expansion and shock loads are absorbed by a special compensator spring.
* Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the built-in oil seal, which also prevents loss of lubricant.
LIVE CENTRE: SKODA MT3 CZECH REPUBLIC
SKU:
LLC626200
* These Skoda live centres are known for their quality and long service record
* European quality - manufactured in the Czech Republic
* Skoda factory which has a long history of manufacturing quality products
* The rotating spindle is extended right through the tapered shank.
* Two specially designed adjustable needle-roller bearings carry all radial loads.
* A heavy duty ball thrust bearing takes all axial thrust.
* Thermal expansion and shock loads are absorbed by a special compensator spring.
* Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the built-in oil seal, which also prevents loss of lubricant.
LIVE CENTRE: SKODA MT4 CZECH REPUBLIC
SKU:
LLC626400
* These Skoda live centres are known for their quality and long service record
* European quality - manufactured in the Czech Republic
* Skoda factory which has a long history of manufacturing quality products
* The rotating spindle is extended right through the tapered shank.
* Two specially designed adjustable needle-roller bearings carry all radial loads.
* A heavy duty ball thrust bearing takes all axial thrust.
* Thermal expansion and shock loads are absorbed by a special compensator spring.
* Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the built-in oil seal, which also prevents loss of lubricant.
LIVE CENTRE: SKODA MT5 CZECH REPUBLIC
SKU:
LLC626600
* These Skoda live centres are known for their quality and long service record
* European quality - manufactured in the Czech Republic
* Skoda factory which has a long history of manufacturing quality products
* The rotating spindle is extended right through the tapered shank.
* Two specially designed adjustable needle-roller bearings carry all radial loads.
* A heavy duty ball thrust bearing takes all axial thrust.
* Thermal expansion and shock loads are absorbed by a special compensator spring.
* Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the built-in oil seal, which also prevents loss of lubricant.
LIVE CENTRE: SKODA MT6 CZECH REPUBLIC
SKU:
LLC626700
* These Skoda live centres are known for their quality and long service record
* European quality - manufactured in the Czech Republic
* Skoda factory which has a long history of manufacturing quality products
* The rotating spindle is extended right through the tapered shank.
* Two specially designed adjustable needle-roller bearings carry all radial loads.
* A heavy duty ball thrust bearing takes all axial thrust.
* Thermal expansion and shock loads are absorbed by a special compensator spring.
* Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the built-in oil seal, which also prevents loss of lubricant.
LIVE CENTRE: MT4 TECH-1 CHINA
SKU:
LLC9103034
LIVE CENTRE: MT2A CL23 TAIWAN
SKU:
LLC9104030
LIVE CENTRE: MT3A CL23 TAIWAN
SKU:
LLC9104032
LIVE CENTRE: MT4A CL23 TAIWAN
SKU:
LLC9104034
LIVE CENTRE: MT3 CL23 EXTENDED POINT TAIWAN
SKU:
LLC9104044
LIVE CENTRE: MT4B CL23 EXTENDED POINT TAIWAN
SKU:
LLC9104046
LIVE CENTRE: MT3A HIGH PERFORMANCE CNC TAIWAN
SKU:
LLC9104052
LIVE CENTRE: MT4A HIGH PERFORMANCE CNC TAIWAN
SKU:
LLC9104054
LIVE CENTRE: MT5A HIGH PERFORMANCE CNC TAIWAN
SKU:
LLC9104056
* High performance live centre
* These Morse Taper live centre have hardened & ground 60 degree cone
* Front end of centre is assembled with roller bearings
* This live cetre is waterproof
* The balance have thrust bearing, ball bearing and needle roller bearings
* Suitable for CNC machines
* Max speed 3500rpm
LIVE CENTRE: MT3A HEAVY LOAD TAIWAN
SKU:
LLC910450
LIVE CENTRE: MT4A HEAVY LOAD TAIWAN
SKU:
LLC910452
LIVE CENTRE: MT5A HEAVY LOAD TAIWAN
SKU:
LLC910454
LIVE CENTRE: TECH-1 MT3 EXTENDED POINT CHINA
SKU:
LLC9105043
LIVE CENTRE: ANCO-SUPER MT5 EXTENDED POINT CHINA
SKU:
LLC9105045
* This Anco-Super live centre comes with extended point
* 65mm L x 38mm D,
* The centre is hardened and ground & treated to 60-65RC
* This centre is fitted with: Neddle rollers, Thrust bearing & deep groove bearings
* Oil can be added if required through oil hole provided in the body
* With the external shrink sleeve of the needle roller - the clearance of the needle roller bearing can be tuned to improve the precision of the centre and prolong it's service life.
LIVE CENTRE: SKODA MT2 EXTENDED POINT CZECH REPUBLIC
SKU:
LLC9105050
* This quality extended point live centre is manufactured in the Czech Republic
* Hardened and precision ground to 60-65RC
* Skoda live centres are known for their quality and long service record
* European quality - manufactured in the Czech Republic
* Skoda factory which has a long history of manufacturing quality products
* The rotating spindle is extended right through the tapered shank.
* Two specially designed adjustable needle-roller bearings carry all radial loads.
* A heavy duty ball thrust bearing takes all axial thrust.
* Thermal expansion and shock loads are absorbed by a special compensator spring.
* Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the built-in oil seal, which also prevents loss of lubricant.
LIVE CENTRE: SKODA MT3 EXTENDED POINT CZECH REPUBLIC
SKU:
LLC9105052
* This quality extended point live centre is manufactured in the Czech Republic
* Hardened and precision ground to 60-65RC
* Skoda live centres are known for their quality and long service record
* European quality - manufactured in the Czech Republic
* Skoda factory which has a long history of manufacturing quality products
* The rotating spindle is extended right through the tapered shank.
* Two specially designed adjustable needle-roller bearings carry all radial loads.
* A heavy duty ball thrust bearing takes all axial thrust.
* Thermal expansion and shock loads are absorbed by a special compensator spring.
* Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the built-in oil seal, which also prevents loss of lubricant.
LIVE CENTRE: SKODA MT4 EXTENDED POINT CZECH REPUBLIC
SKU:
LLC9105054
* This quality extended point live centre is manufactured in the Czech Republic
* Hardened and precision ground to 60-65RC
* Skoda live centres are known for their quality and long service record
* European quality - manufactured in the Czech Republic
* Skoda factory which has a long history of manufacturing quality products
* The rotating spindle is extended right through the tapered shank.
* Two specially designed adjustable needle-roller bearings carry all radial loads.
* A heavy duty ball thrust bearing takes all axial thrust.
* Thermal expansion and shock loads are absorbed by a special compensator spring.
* Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the built-in oil seal, which also prevents loss of lubricant.
LIVE CENTRE: SKODA MT5 EXTENDED POINT CZECH REPUBLIC
SKU:
LLC9105056
* This quality extended point live centre is manufactured in the Czech Republic
* Hardened and precision ground to 60-65RC
* Skoda live centres are known for their quality and long service record
* European quality - manufactured in the Czech Republic
* Skoda factory which has a long history of manufacturing quality products
* The rotating spindle is extended right through the tapered shank.
* Two specially designed adjustable needle-roller bearings carry all radial loads.
* A heavy duty ball thrust bearing takes all axial thrust.
* Thermal expansion and shock loads are absorbed by a special compensator spring.
* Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the built-in oil seal, which also prevents loss of lubricant.
LIVE CENTRE: SKODA MT6 EXTENDED POINT CZECH REPUBLIC
SKU:
LLC9105058
* This quality extended point live centre is manufactured in the Czech Republic
* Hardened and precision ground to 60-65RC
* Skoda live centres are known for their quality and long service record
* European quality - manufactured in the Czech Republic
* Skoda factory which has a long history of manufacturing quality products
* The rotating spindle is extended right through the tapered shank.
* Two specially designed adjustable needle-roller bearings carry all radial loads.
* A heavy duty ball thrust bearing takes all axial thrust.
* Thermal expansion and shock loads are absorbed by a special compensator spring.
* Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the built-in oil seal, which also prevents loss of lubricant.
LIVE CENTRE: ANCO MT3 INTERCHANGEABLE TIPS TAIWAN
SKU:
LLC9106010
LIVE CENTRE: FORGE MT4 INTERCHANGEABLE TIPS TAIWAN
SKU:
LLC9106015
LIVE CENTRE: SKODA MT3 7PC INTERCHANGE TIPS CZECH REPUBLIC
SKU:
LLC9106018
LIVE CENTRE: SKODA MT4 7PC INTERCHANGE TIPS CZECH REPUBLIC
SKU:
LLC9106020
LIVE CENTRE: SKODA MT5 7PC INTERCHANGE TIPS CZECH REPUBLIC
SKU:
LLC9106025
LIVE CENTRE: SKODA MT2 CNC CZECH REPUBLIC
SKU:
LLC9106050
* This Skoda CNC live centre is suitable for running at high rpm
* It is recomended to lubricate the centre every 300 hours
* This is achieved through the screwhole on the body of the centre and taper end
* We recomend LV 2-3 lithium lubricating grease
* Careful maintenance of these centres will extend their working life
LIVE CENTRE: SKODA MT3 CNC CZECH REPUBLIC
SKU:
LLC9106052
* This Skoda CNC live centre is suitable for running at high rpm
* It is recomended to lubricate the centre every 300 hours
* This is achieved through the screwhole on the body of the centre and taper end
* We recomend LV 2-3 lithium lubricating grease
* Careful maintenance of these centres will extend their working life
LIVE CENTRE: SKODA MT4 CNC CZECH REPUBLIC
SKU:
LLC9106054
* This Skoda CNC live centre is suitable for running at high rpm
* It is recomended to lubricate the centre every 300 hours
* This is achieved through the screwhole on the body of the centre and taper end
* We recomend LV 2-3 lithium lubricating grease
* Careful maintenance of these centres will extend their working life
LIVE CENTRE: SKODA MT5 CNC CZECH REPUBLIC
SKU:
LLC9106056
* This Skoda CNC live centre is suitable for running at high rpm
* It is recomended to lubricate the centre every 300 hours
* This is achieved through the screwhole on the body of the centre and taper end
* We recomend LV 2-3 lithium lubricating grease
* Careful maintenance of these centres will extend their working life
PARTING TOOL KIT: 12.0MM + NCIH 19-3 3.0MM
SKU:
LTA120140
PARTING TOOL KIT: 16.0MM + NCIH 26-3 3.0MM
SKU:
LTA120159
PARTING TOOL KIT: 16.0MM + NCIH 26-2 2.0MM
SKU:
LTA120160
PARTING TOOL KIT: 16.0MM + 2 BLADES x 26MM + TIPS SET
SKU:
LTA120161
PARTING TOOL KIT: 16.0MM + BLADE NCIH19-2 2.0MM
SKU:
LTA120162
PARTING TOOL KIT: 20.0MM + BLADES NCIH26-2 2.0 & 3.0MM
SKU:
LTA120164
PARTING TOOL KIT: 20.0MM + SK-28B BLADE 3.0MM
SKU:
LTA120165
PARTING TOOL KIT: 20.0MM + 2 BLADES 3 & 4MM
SKU:
LTA120167
PARTING TOOL KIT: 25.0MM + 3 BLADES 3.0, 4.0, 5.0MM
SKU:
LTA120169
PARTING TOOL KIT: 25.0MM + 2 X 150 X 32.0MM 3.0MM BLADES
SKU:
LTA120170
THREADING TOOL KIT: SER 1616H16 16.0MM
SKU:
LTA120240
THREADING TOOL HOLDER: SEL 1616H16 16.0MM L/HAND
SKU:
LTA120241
THREADING TOOL KIT: 20.0MM INT/EXT
SKU:
LTA120243
THREADING TOOL KIT: 25.0MM INT/EXT
SKU:
LTA120245
LATHE TOOL SET: 3PC 10.0MM SHANK BLACK
SKU:
LTA9294010
LATHE TOOL SET: 3PC 12.0MM SHANK BLACK
SKU:
LTA9294012
CHROME TOOL SET: 3PC 16.0MM SHANK
SKU:
LTA9294016
CHROME TOOL SET: 3PC 25.0MM SHANK
SKU:
LTA9294024
CHROME TOOL SET: 5PC 8.0MM SHANK
SKU:
LTA9294051
CHROME TOOL SET: 5PC 12.0MM SHANK
SKU:
LTA9294054
CHROME TOOL SET: 5PC 16.0MM SHANK
SKU:
LTA9294056
CHROME TOOL SET: 5PC 20.0MM SHANK
SKU:
LTA9294058
CHROME TOOL SET: 5PC 25.0MM SHANK
SKU:
LTA9294060
TURNING TOOL SET: 5PC 12.0MM SHANK HARLINGEN
SKU:
LTA9294118
* This Harlingen 5pc lathe tool turning set is a great starting set for lathe metal turning and is suitable for external and end turning
* Uses the same TCMC carbide inserts on all tools which is great as it saves having to provide a range of tips for each tool
* Comes with a quality aluminium case for safe storage
TURNING TOOL SET: 5PC 16.0MM SHANK HARLINGEN
SKU:
LTA9294120
* This Harlingen 5pc lathe tool turning set is a great starting set for lathe metal turning and is suitable for external and end turning
* Uses the same TCMC carbide inserts on all tools which is great as it saves having to provide a range of tips for each tool
* Comes with a quality aluminium case for safe storage
TURNING TOOL SET: 5PC 20.0MM SHANK HARLINGEN
SKU:
LTA9294124
* This Harlingen 5pc lathe tool turning set is a great starting set for lathe metal turning and is suitable for external and end turning
* Uses the same TCMC carbide inserts on all tools which is great as it saves having to provide a range of tips for each tool
* Comes with a quality aluminium case for safe storage
TURNING TOOL SET: 7PC 12.0MM SHANK HARLINGEN
SKU:
LTA9294130
* This Harlingen 7pc lathe tool turning set is a great starting set for lathe metal turning and is suitable for external and end turning
* Uses a range of carbide inserts gto suit all tools
* This turning tool set will suit all your turning requirements
* Comes with a quality aluminium case for safe storage
TURNING TOOL SET: 7PC 16.0MM SHANK HARLINGEN
SKU:
LTA9294132
* This Harlingen 7pc lathe tool turning set is a great starting set for lathe metal turning and is suitable for external and end turning
* Uses a range of carbide inserts gto suit all tools
* This turning tool set will suit all your turning requirements
* Comes with a quality aluminium case for safe storage
LATHE TOOLPOST: TP1 55 X 55MM
SKU:
LTE400120
LATHE TOOLPOST: TP2 65 X 65MM
SKU:
LTE400130
LATHE TOOLPOST: TP3 81 X 81MM
SKU:
LTE400140A
LATHE TOOLPOST: TP4 90 X 90MM
SKU:
LTE400150
LATHE TOOLPOST: TP8 140 X 140MM
SKU:
LTE400190