- Show All
- AUTO RECONDITIONING MACHINES
- AXLE STANDS
- BATTERY CHARGERS
- ENGINE STANDS
- GREASE & OILS
- HYDRAULIC BODY JACKS
- HYDRAULIC BOTTLE JACKS
- HYDRAULIC TOE JACKS
- HYDRAULIC TROLLEY JACKS
- HYD ENGINE CRANES
- HYD MOTORCYCLE LIFT
- HYD TRANSMISSION JACKS
- HYD SPRING COMPRESSOR
- HYD VEHICLE POSITIONING JACK
- GARAGE ESSENTIALS
- OIL DRAIN TANK
- PANEL BEATING EQUIPMENT
- WORKSHOP PRESSES
DIE NUT: M6 X 0.75 FINE
SKU:
DIE6042111
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M7 X 0.75 FINE
SKU:
DIE6042112
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M8 X 1.0 FINE
SKU:
DIE6042113
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M9 X 1.0 FINE
SKU:
DIE6042114
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M10 X 1.0 FINE
SKU:
DIE6042115
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M10 X 1.25 FINE
SKU:
DIE6042116
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M12 X 1.25 FINE
SKU:
DIE6042117
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M14 X 1.25 FINE
SKU:
DIE6042119
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M14 X 1.5 FINE
SKU:
DIE6042120
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M16 X 1.5 FINE
SKU:
DIE6042121
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M18 X 1.5 FINE (SOMTA)
SKU:
DIE6042123
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M20 X 1.5 FINE
SKU:
DIE6042125
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M22 X 1.5 FINE
SKU:
DIE6042127
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M24 X 1.5 FINE
SKU:
DIE6042128
** Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M24 X 2.0 FINE
SKU:
DIE6042129
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M25 X 1.5 FINE
SKU:
DIE6042130
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M8 X 1.25 LEFT HAND
SKU:
DIE6052000
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: M24 X 1.25 LEFT HAND
SKU:
DIE6055000
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: 1/8″ X 40 BSW LEFT HAND
SKU:
DIE6061000
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE NUT: 7/16″ X 14 BSW LEFT HAND
SKU:
DIE6062000
* Die nuts, also known as a thread chaser, is used for sharpening an existing thread. It is run over threads that may have been damaged or blunted over time to correct them to their original condition
* They look the same in appearance to a square or hexagonal nut
* They are easy to use and can be operated using an ordinary box spanner or set spanner
* They are available in various sizes, types and threads, with this information being engraved on their front surface or face.
* All our die nuts are manufactured from quality HSS-M2 for durability and long service
DIE: ROUND 1 X 64 UNC OD 13/16″
SKU:
DIE6101001
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 2 X 56 UNC OD 13/16″
SKU:
DIE6101002
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 3 X 48 UNC OD 13/16″
SKU:
DIE6101003
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 4 X 40 UNC OD 13/16″
SKU:
DIE6101004
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 5 X 40 UNC OD 13/16″
SKU:
DIE6101005
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 6 X 32 UNC OD 13/16″
SKU:
DIE6101006
*** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 8 X 32 UNC OD 13/16″
SKU:
DIE6101008
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 8 X 32 UNC OD 13/16″
SKU:
DIE6101008M
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 10 X 24 UNC OD 13/16″
SKU:
DIE6101010
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 12 X 24 UNC OD 13/16″
SKU:
DIE6101012
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1/4″ X 20 UNC OD 1″
SKU:
DIE6102500
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 7/32″ X 32 UNC OD 1″
SKU:
DIE6103120
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 5/16″ X 18 UNC OD 1″
SKU:
DIE6103125
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 3/8″ X 16 UNC OD 1″
SKU:
DIE6103750
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 7/16″ X 14 UNC OD 1″
SKU:
DIE6104375
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1/2″ X 13 UNC OD 1″
SKU:
DIE6105000
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 9/16″ X 12 UNC OD 1.5″
SKU:
DIE6105625
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 5/8″ X 11 UNC OD 2.0″”
SKU:
DIE6106250
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 3/4″ X 10 UNC OD 1.5″
SKU:
DIE6107500
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 5/16″ X 18 UNC OD 2″
SKU:
DIE6108740
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 7/8″ X 9 UNC OD 2″
SKU:
DIE6108750
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1″ X 8 UNC OD 2″
SKU:
DIE6109100
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1 X 72 UNF OD 3/16″
SKU:
DIE6121001
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 2 X 64 UNF OD 3/16″
SKU:
DIE6121002
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 3 X 56 UNF OD 3/16″
SKU:
DIE6121003
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 4 X 48 UNF OD 3/16″
SKU:
DIE6121004
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 5 X 44 UNF OD 13/16″
SKU:
DIE6121005
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 6 X 40 UNF OD 13/16″
SKU:
DIE6121006
DIE: ROUND 8 X 36 UNF OD 3/16″
SKU:
DIE6121007
DIE: ROUND 10 X 32 UNF OD 3/16″
SKU:
DIE6121008
DIE: ROUND 12 X 28 UNF OD 13/16″
SKU:
DIE6121009
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1/4″ X 28 UNF OD 1″
SKU:
DIE6122500
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 5/16″ X 24 UNF OD 1″
SKU:
DIE6123125
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 3/8″ X 24 UNF OD 1″
SKU:
DIE6123750
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 7/16″ X 20 UNF OD 1″
SKU:
DIE6124375
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1/2″ X 20 UNF OD 1″
SKU:
DIE6125000
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 9/16″ X 18 UNF OD 1-1/2″
SKU:
DIE6125625
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 5/8″ X 18 UNF OD 1-1/2″
SKU:
DIE6126250
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 3/4″ X 16 UNF OD 1-1/2″
SKU:
DIE6127500
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 7/8″ X 14 UNF OD 2″
SKU:
DIE6128750
DIE: ROUND 1″ X 12 UNF OD 2″
SKU:
DIE6129100
DIE: ROUND 7/32″ X 32 UNS” OD 1″
SKU:
DIE6132000
DIE: ROUND 1/16″ X BSW OD 1″
SKU:
DIE6142470
DIE: ROUND 3/32″ X BSW OD 1″
SKU:
DIE6142475
DIE: ROUND 1/8″ X 40 BSW OD 1″
SKU:
DIE6142480
DIE: ROUND 5/32″ X 32 BSW OD 1″
SKU:
DIE6142485
DIE: ROUND 3/16″ X 24 BSW OD 1″
SKU:
DIE6142490
DIE: ROUND 7/32″ X 24 BSW OD 1″
SKU:
DIE6142495
DIE: ROUND 1/4″ X 20 BSW OD 1″
SKU:
DIE6142500
DIE: ROUND 5/16″ X 18 BSW OD 1″
SKU:
DIE6143125
DIE: ROUND 3/8″ X 16 BSW OD 1″
SKU:
DIE6143750
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 7/16″ X 14 BSW OD 1″
SKU:
DIE6144375
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1/2″ X 12 BSW OD 38MM
SKU:
DIE6145000
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 9/16″ X 12 BSW OD 1-1/2″
SKU:
DIE6145625
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 5/8″ X 11 BSW OD 1-1/2″
SKU:
DIE6146250
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 11/16″ X 1.5 BSW OD 1-1/2″
SKU:
DIE6146260
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 3/4″ X 10 BSW OD 1-1/2″
SKU:
DIE6147500
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 7/8″ X 9 BSW OD 2″
SKU:
DIE6148750
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 15/16″ X 9 BSW OD 2″
SKU:
DIE6148800
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!
DIE: ROUND 1″ X 8 BSW OD 2″
SKU:
DIE6149100
** About this item **
* This HSS round die cuts perfect threads in steel, iron, aluminum
* The high-quality high speed steel stays sharp way longer than cheap dies, and the precision-ground threads are buttery smooth
* The large chip holes prevent clogging, and the tapered locking hole fits standard die holders perfectly
* Whether you're doing repairs or production work, this industrial-grade die won't let you down
* Pro tip: Use some cutting oil for even cleaner threads
* Much better than those bargain-bin dies that dull after three uses!